Key Digital KD-CAT5XHDMI Manuel utilisateur

521 East 3rd Street, Mount Vernon, NY 10553

Phone :: 914.667.9700 Fax :: 914.668.8666

Web :: www.keydigital.com

Rev 0 – July 2007

The KD-CAT5XHDMI is a CAT5 to HDMI extender receiver capable of resolutions up to 1080P

and can be used with or without the supplied power adapter. This device is intended for use

with Key Digital’s KD-HDMIXCAT5 (transmitter) or KD-CAT5XCAT5 (CAT5 extender).

Operating Manual

CAT5 HDMI Extender

Key Digital

, led by digital video pioneer Mike Tsinberg,

develops and manufactures high quality, cutting-edge

technology solutions for virtually all applications where

high quality video imaging is important. Key Digital

is at the forefront of the video industry for Home

Theater Retailers, Custom Installers, System Integrators,

Broadcasters, Manufacturers, and Consumers. We

provide

total video system solutions because we know

and help drive the technology, the industry, the business,

and all the latest up-and-coming standards. But most

of all, we know exactly what you need for your unique

application - the right solution.

KD-CAT5XHDMI

KD-CAT5XHDMI_Manual.indd 2-3 7/17/07 3:59:51 PM

Page 4

Page 1

HDMI

KD-HDMIXCAT5

CAT5/6

Plasma

Cable Box

KD-CAT5XHDMI

Quick Set Up Guide

HDMI Output

Connect the CAT5 input

source cables to the correct

input ports (‘Data’ and ‘Control’)

on the KD-CAT5XHDMI.

Then, connect power.

Table of Contents

Installation Instructions.............................................3

Mounting the KD-CAT5XHDMI unit....................................4

DVI Applications for the KD-CAT5XHDMI ...............................5

Troubleshooting ..................................................5

Technical Speciﬁcations............................................6

Important Product Warnings ........................................7

Safety Instructions ................................................7

How to Contact Key Digital

.........................................8

Warranty .......................................................9

Finally, connect the HDMI output

of the KD-CAT5XHDMI to the

receiving device.

CAT5 Input

Please read all instructions to insure safe operation of the product.

KD-CAT5XHDMI_Manual.indd 4-1 7/17/07 3:59:56 PM

Page 2

Page 3

Installation Instructions

The KD-CAT5XHDMI can receive power from either the CAT5 connection or via the

supplied power adapter. When using the CAT5 cable to deliver power to the unit,

performance is subject to the following factors:

Ability of the CAT5 cable to deliver the required power over distance

Quality of the CAT5 cable.

We recommend the use on non-shielded CAT5 cable for best performance.

1. Find a safe and convenient location for the KD-CAT5XHDMI unit.

Before permanently securing the unit or final installation of cabling

behind walls or ceilings, test for proper operation of the unit and the

cables in your system.

2. Connections

Plug in the CAT5 source cables (from either the KD-HDMIXCAT5 or KD-

CAT5XCAT5) to their corresponding ‘Data’ and ‘Control’ input ports of the KD-

CAT5XHDMI. If you are not using the supplied power adapter, the “Power” LED

should illuminate upon plugging in the ‘Control’ input cable if your HDMI source

and the KD-HDMIXCAT5 or KD-CAT5XCAT5 are powered on.

If the power LED does not light upon plugging in the CAT5 cable to the ‘Control’

port, make sure you have not crossed the ‘Control’ port cable with the ‘Data’ port

cable.

Plug in the HDMI cable to the “Output” port on the KD-CAT5XHDMI. At this point,

if both your source (KD-HDMIXCAT5, KD-CAT5XCAT5) and destination devices are

powered on, you should see the green “Power” LED and the blue “HPD” LED lit.

3. Power

In order to insure the best possible performance from the KD-CAT5XHDMI, we

recommend using only the original Key Digital power supply.

If you are using the supplied power adapter, plug it into the power input jack on

the side of the unit. You should see the “Power” LED illuminate. (see Fig. 1)

4. LEDs

When a stable signal is established between your source and destination, the

red “Equalizer Active” LED will light. If this red LED indicator is blinking or not

illuminated, try shortening HDMI or CAT5 cable lengths or lowering the resolution

of the video signal.

➔

Power Jack

Power Indicator

Stable input video

signal present

Valid Source/Sync

DVD/TV connection

indicator

KD-CAT5XHDMI

CAUTION: No other power supply adapter can be used with this unit! Using

a power supply other than the one provided by Key Digital

with the unit

VOIDS THE ENTIRE PRODUCT WARRANTY, may cause damage to the unit

and associated equipment, and is a potential safety hazard.

KD-CAT5XHDMI_Manual.indd 2-3 7/17/07 3:59:59 PM

Page 4

Page 5

Mounting the KD-CAT5XHDMI unit

The KD-CAT5XHDMI is shipped with a convenient mounting clip as an installation option.

Once you have veriﬁed operation of the unit with your cables, secure the mounting clip

to a convenient location. Carefully insert the KD-CAT5XHDMI into the mounting clip

provided.

An optional cable clip (included) enables a method for securing HDMI cables to the

mounting bracket of the KD-CAT5XHDMI.

Troubleshooting

Most issues with the KD-CAT5XHDMI setup will involve resolution and distance

performance. If you experience problems (no image, video artifacts, picture dropout,

noise) here are a few things to try.

Use the shortest possible HDMI and CAT5 cables between devices.

Lower the output resolution of the image source.

Use the provided power supply for the KD-CAT5XHDMI instead of relying on the

voltage in the HDMI cable to power the unit.

Use Key Digital HDMI cables.

Other possible problems can result from custom made CAT5 cables. CAT5 cables must

be terminated in accordance with TIA/EIA-568-A or TIA/EIA-568-B pin-pair assignments.

DVI applications for the KD-CAT5XHDMI

The KD-CAT5XHDMI can also be used to extend DVI-D video cable runs. For these

applications, use DVI to HDMI (Key Digital model number KD-MFHDMI or KD-FMHDMI)

adapters.

KD-FMHDMI KD-MFHDMI

Optional cable clips

KD-CAT5XHDMI_Manual.indd 4-5 7/17/07 4:00:03 PM

Page 6

Page 7

Technical Speciﬁcations

Connectors:

Two CAT5 input connectors labeled “Data” and “Control”

Standard RJ45 Jack using TIA/EIA-568-A or TIA/EIA-568-B pin/pair assignments

One HDMI output connector labeled “Output”

Power:

External AC-DC power supply included (5 Volt DC @ 1 Amp, 110-240 VAC, 50-60 Hz)

Mechanical:

No Fan Noise

Weight < 1Lb

Molded black ABS Enclosure

Molded black ABS cable clip (1)

Molded black ABS mounting clip (1)

Resolutions Supported:

All resolution up to 1080p/60Hz

Dimensions:

HxWxL = 25 mm x 50 mm x 84 mm

HxWxL = 1 in x 2 in x 3.25 in

›

➔

›

Read and follow all instructions.

Heed all warnings.

Do not use this device near water.

Clean only with dry cloth.

Do not install near any heat sources such as radiators, heat registers, stoves, or

other apparatus (including ampliﬁers) that produce heat.

Only use attachments/accessories speciﬁed by the manufacturer.

Refer all servicing to qualiﬁed service personnel. Servicing is required when the

device has been damaged in any way including:

Damage to the power supply or power plug

Liquid spills on the device

Objects fallen into the device

Exposure to rain or moisture

➔

Connect CAT5 cables before providing power to the unit.

Test for proper operation before securing unit behind walls or

in hard to access spaces.

If installing the KD-CAT5XHDMI into wall or mounting bracket into sheet-rock,

provide proper screw support with bolts or sheet-rock anchors.

Important Product Warnings:

Safety Instructions.

Please be sure to follow these instructions for safe

operation of your unit.

KD-CAT5XHDMI

KD-CAT5XHDMI_Manual.indd 6-7 7/17/07 4:00:06 PM

Page 8

Page 9

Warranty

All Key Digital

products are built to high manufacturing standards and should provide

years of trouble-free operation. They are backed by a limited two-year parts and labor

warranty.

How to Contact Key Digital®

Repairs and Warranty Service

To obtain a Returned Materials Authorization (RMA) number, please contact:

Phone: 1-914-667-9700

E-mail: rma@keydigital.com

Technical Support

For technical questions about using our products, please contact us at either:

Phone: 1-914-667-9700

E-mail: tech@keydigital.com

Customer Support

For customer support questions about using our products, please contact us at

either:

Phone: 1-914-667-9700

E-mail: [email protected]

Feedback

Please e-mail any comments/questions about the manual to:

E-mail: [email protected]

›

➔

›

➔

›

➔

›

➔

KD-CAT5XHDMI_Manual.indd 8-9 7/17/07 4:00:07 PM

Autres manuels pour KD-CAT5XHDMI

Table des matières

Autres manuels Key Digital Extenseur

Key Digital

Key Digital KD-HDMIXCAT5 Manuel utilisateur

Key Digital

Key Digital KD-XUSB2 Manuel utilisateur

Key Digital

Key Digital PRO Connect PCBKDCATHD Tx Manuel utilisateur

Key Digital

Key Digital KD-X422POA Manuel utilisateur

Key Digital

Key Digital KD-HDB150 Manuel utilisateur

Key Digital

Key Digital FatCAT KD-CATHD Tx Manuel utilisateur

Key Digital

Key Digital KD-X444SP Manuel utilisateur

Key Digital

Key Digital KD-HDFIX22 Manuel utilisateur

Key Digital

Key Digital KD-X222 Manuel utilisateur

Key Digital

Key Digital KD-CATHD300Lite Manuel utilisateur

Key Digital

Key Digital Phantom KD-HD1X1ProK Manuel utilisateur

Key Digital

Key Digital KD-X600ProK Manuel utilisateur

Key Digital

Key Digital KD-X444LP Manuel utilisateur

Key Digital

Key Digital KD-X444LP Manuel utilisateur

Key Digital

Key Digital KD-X222PO Manuel utilisateur

Key Digital

Key Digital FATCAT Series Manuel utilisateur

Key Digital

Key Digital KD-4KWHCEX Manuel utilisateur

Key Digital

Key Digital KD-CAT5XCAT5 Manuel utilisateur

Key Digital

Key Digital KD-HDMIWPRX Manuel utilisateur

Key Digital

Key Digital Phantom KD-HDDA1X1 Manuel utilisateur

Key Digital

Key Digital KD-X444SP Manuel utilisateur

Key Digital

Key Digital FatCAT KD-CATHD250POH Manuel utilisateur

Key Digital

Key Digital Smart Baluns KD-BBRX Manuel utilisateur

Key Digital

Key Digital KD-X411ProK Manuel utilisateur

Manuels Extenseur populaires d'autres marques

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

SC&T

SC&T HE03-4K Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

MuxLab

MuxLab 500771 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur