Key Digital KD-CAT5XCAT5 Manuel utilisateur

KD-CAT5XCAT5

Operating Manual

CAT5 Extender

The KD-CAT5XCAT5 is a CAT5 extender capable of resolutions up to 1080P. It

can be used with or without the supplied power adapter and is intended for use with

Key Digital’s KD-HDMIXCAT5, KD-VP8, KD-HDMIWPTX, KD-HDMIWPRX or

KD-CAT5XHDMI.

Quick Setup Guide

Connect power, then connect the CAT5 input source cables to the correct

input ports (‘Data’ and ‘Control’) on the KD-CAT5XCAT5. Finally,

connect the CAT5 outputs to the receiving device (KD-CAT5XHDMI, KD-

HDMIWPRX)

Table of Contents

Installation Instructions……………………………………………………………………4

Technical Specifications ………………………………………………………………….6

Troubleshooting…………………………………………………………………………...6

Product Warnings………………………………………………………………………….7

Warranty………………………………………………………………………………......7

Contact Information……………………………………………………………………….8

Fig. 1

Instructions

The KD-CAT5XCAT5 can receive power from either the CAT5 ‘Control’ connection or

via the supplied power adapter. When using the CAT5 cable to deliver power to the unit,

performance is subject to the following factors:

Ability of the CAT5 cable to deliver the required power over distance

Quality of the CAT5 cable.

1. Find a safe and convenient location for the KD-CAT5XCAT5 unit.

Before permanently securing the unit or final installation of cabling behind walls or

ceilings, test for proper operation of the unit and the cables in your system.

2. Power

In order to insure the best possible performance from the KD-CAT5XCAT5, we

recommend using only the original Key Digital power supply.

If you are using the supplied power adapter, plug it into the power input jack on

the side of the unit. You should see the “Power” LED illuminate. (see Fig. 1)

Green LED: Power Indicato

Blue LED: Stable in

ut video si

nal

resent

Red LED: Valid Source/S

nch DVD/TV connection indicato

Power Jack

3. Connections

•Plug in the CAT5 source cables to their corresponding ‘Data’ and ‘Control’

input ports of the KD-CAT5XCAT5. If you are not using the supplied power

adapter, the “Power” LED should illuminate upon plugging in the ‘Control’

input cable if your HDMI source and the KD-HDMIXCAT5 or KD-

CAT5XCAT5 are powered on.

•Plug in the CAT5 output cables to the “Data” and “Control” output ports on

the KD-CAT5XCAT5. At this point, if both your source (KD-VP8, KD-

HDMIXCAT5 or KD-HDMIWPTX) and destination (KD-CAT5XHDMI,

KD-HDMIWPRX) devices are powered on, you should see the green “Power”

LED and the blue “HPD” LED lit.

When a stable signal is established between your source and destination, the red

“Equalizer Active” LED will light. If this red LED indicator is blinking or not

illuminated, try shortening HDMI or CAT5 cable lengths or lowering the resolution

of the video signal.

Mounting the KD-CAT5XCAT5 unit

The KD-CAT5XCAT5 is shipped with a convenient mounting bracket as an installation

option. Once you have verified operation of the unit with your cables, secure the

mounting bracket to a convenient location. Carefully insert the KD-CAT5XCAT5 into

the bracket.

Technical Specifications

Connectors: Two CAT5 input connectors labeled “Data” and “Control”

Two CAT5 output connectors labeled “Data” and “Control”

Power: External AC-DC power supply included (5 Volt DC @ 1 Amp,

110-240 VAC, 50-60 Hz)

Mechanical: No Fan Noise

Weight < 1Lb

Molded black ABS Plastic Enclosure

Molded black ABS mounting bracket (1)

Resolutions Supported: All resolution up to 1080p/60

Dimensions: HxWxL = 25mm x 50mm x 84mm

1in x 2in x 3.25in

Troubleshooting

Most issues with the KD-CAT5XCAT5 setup will involve resolution and distance

performance. If you experience problems (no image, video artifacts, picture dropout,

noise) here are a few things to try.

1. Use the shortest possible CAT5 cables between devices.

2. Lower the output resolution of the image source.

3. Use the provided power supply for the KD-CAT5XCAT5 instead of relying

on the voltage in the CAT5 cable to power the unit.

Product Warnings:

1) Connect HDMI and CAT5 cables before providing power to the unit.

2) Test for proper operation before securing unit behind walls or in hard to

access spaces.

3) If installing the KD-CAT5XCAT5 into wall or mounting bracket into sheet-

rock, provide proper screw support with bolts or sheet-rock anchors.

1. Read and follow all instructions.

2. Heed all warnings.

3. Do not use this device near water.

4. Clean only with dry cloth.

5. Install in accordance with the manufacturer’s instructions.

6. Do not install near any heat sources such as radiators, heat registers, stoves, or

other apparatus (including amplifiers) that produce heat.

7. Only use attachments/accessories specified by the manufacturer.

8. Refer all servicing to qualified service personnel. Servicing is required when the

device has been damaged in any way including:

•Damage to the power supply or power plug

•Exposure to rain or moisture

Key Digital Contacts

Repairs and Warranty Service

To obtain a Returned Materials Authorization (RMA) number, please contact:

Phone: (914)-667-9700

email: [email protected]

[email protected]

Technical Support

Phone: (914)-667-9700

Email: tech@KeyDigital.com

Customer support

Phone: (914)-667-9700

Email: [email protected]

Autres manuels pour KD-CAT5XCAT5

Table des matières

Autres manuels Key Digital Extenseur

Key Digital

Key Digital KD-X444LP Manuel utilisateur

Key Digital

Key Digital KD-CAT5XHDMI Manuel utilisateur

Key Digital

Key Digital KD-IP120TX Manuel utilisateur

Key Digital

Key Digital Black Bull KD-CATDRV Tx Manuel utilisateur

Key Digital

Key Digital KD-X422POA Manuel utilisateur

Key Digital

Key Digital KD-X400POHK Manuel utilisateur

Key Digital

Key Digital KD-X411ProK Manuel utilisateur

Key Digital

Key Digital KD-HDFIX22 Manuel utilisateur

Key Digital

Key Digital KD-CATHD300Lite Manuel utilisateur

Key Digital

Key Digital KD-CATHD500Pro Manuel utilisateur

Key Digital

Key Digital FatCAT KD-CATHD250Lite Manuel utilisateur

Key Digital

Key Digital KD-XUSB2 Manuel utilisateur

Key Digital

Key Digital KD-X444S Manuel utilisateur

Key Digital

Key Digital KD-FIX418 Manuel utilisateur

Key Digital

Key Digital FATCAT Series Manuel utilisateur

Key Digital

Key Digital KD-HDMIXCAT5 Manuel utilisateur

Key Digital

Key Digital KD-X222 Manuel utilisateur

Key Digital

Key Digital KD-CAT5XCAT5 Manuel utilisateur

Key Digital

Key Digital KD-HDB150 Manuel utilisateur

Key Digital

Key Digital KD-X444SP Manuel utilisateur

Key Digital

Key Digital Smart Baluns KD-BBRX Manuel utilisateur

Key Digital

Key Digital KD-HDDA1x1Pro Manuel utilisateur

Key Digital

Key Digital KD-X444SP Manuel utilisateur

Key Digital

Key Digital KD-HDMIWPRX Manuel utilisateur

Manuels Extenseur populaires d'autres marques

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

SC&T

SC&T HE03-4K Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

MuxLab

MuxLab 500771 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur