Juniper SSR130 Manuel utilisateur

Quick Start

SSR130

IN THIS GUIDE

Step 1: Begin | 1

Step 2: Up and Running | 15

Step 3: Keep Going | 16

Step 1: Begin

IN THIS SECTION

Meet the SSR130 | 2

Claim Your Device | 2

Add the Network | 4

Add an Applicaon | 6

Create a Template | 7

Create Policies | 11

Assign the Template to a Site | 13

Assign the SSR130 to a Site | 14

This guide walks you through the simple steps to get a new cloud-ready SSR130 up and running in the Juniper Mist AI

cloud portal. You can onboard a single device using your mobile phone, or one or more devices using your computer.

Once onboarded, we'll walk you through the steps to create a basic conguraon.

You'll need a Juniper Mist WAN Assurance subscripon and your login credenals for the Juniper Mist portal.

Meet the SSR130

The Juniper Networks SSR130 network appliance is part of the SSR porolio. The SSR130 features four 1 GbE ports,

two 1 GbE RJ-45/SFP combo ports, 8 GB of memory, and a 120 GB enterprise-grade solid-state drive (SSD) for storage.

The SSR130 runs the FIPS 140-2 Level 1 compliant Session Smart Router (SSR) soware, which provides secure and

resilient WAN connecvity.

The SSR130 is available in models with or without LTE support.

Claim Your Device

IN THIS SECTION

Scan the QR Code | 3

Enter the Mist Claim Code | 4

To add the SSR130 to your organizaon's WAN Edge inventory, you'll need to enter the SSR130 claim informaon into

Mist. Locate the claim label on the rear panel.

There are two ways to enter the device claim informaon into Mist. Choose the method that is best for you.

• Scan the QR code with the MistAI app

• Manually enter the claim code in Mist

NOTE: You can download the Mist Applicaon from the following mobile app stores:

For Apple Devices

For Android Devices

Scan the QR Code

1. Open your MistAI App.

2. Select Claim Devices to Org.

3. Scan the QR code.

Enter the Mist Claim Code

1. Log in to your Mist organizaon's dashboard.

2. Navigate to your organizaon's inventory, and select the WAN tab at the top.

3. Select the Claim WAN Edges buon in the upper right of the inventory screen.

4. Add the claim code into the list of devices to claim.

5. Clear the Assign claimed WAN edges to site check box. This places the SSR into inventory, to be assigned to a site

later.

6. Click the Claim buon to claim the SSR into your inventory.

Onboarding Complete!

Fantasc, the SSR130 is in your inventory! To provision the SSR130 with ZTP, log in to Mist and connue with WAN

conguraon.

Add the Network

To begin your WAN design, idenfy the network the SSR will use to access applicaons over a LAN network segment.

1. From the Mist dashboard, navigate to the WAN secon of the organizaon sidebar menu, and select Networks.

2. Select Add Networks in the upper right.

3. Give the network a name.

4. Congure the network subnet as 192.168.1.0/24.

5. Click Save at the boom of the Edit Network side panel.

Excellent! You have now dened this network for use across the enre organizaon, including the template you will

apply to your new SSR130.

Add an Applicaon

SUMMARY

Next, dene the applicaons for the WAN to deliver, starng with the Internet.

1. Navigate back to the WAN secon of the organizaon sidebar menu, and select Applicaons.

2. Select Add Applicaons in the upper right.

3. Name the applicaon Internet.

4. Enter 0.0.0.0/0, or an IPv4 address space in the IP Addresses conguraon.

5. Click Save at the boom of the Add Applicaon side panel.

Nice! Your organizaon is set up to provide access to the Internet using the WAN.

Create a Template

IN THIS SECTION

Dene the WAN Port | 9

Dene the LAN Port | 10

So far you have an SSR device waing to be claimed, a network for your LAN, and an Internet applicaon for your WAN

to deliver. Next, you need to create a WAN Edge template that es them all together. Templates provide a re-usable and

consistent conguraon for every SSR you deploy.

1. Navigate back to the WAN secon of the organizaon sidebar menu, and select WAN Edge Templates.

2. Select Create Template in the upper right.

3. Name the template.

4. Click Create.

5. Enter NTP and DNS informaon to be used by the WAN edge device.

Dene the WAN Port

The rst thing to do in your template is to dene which port to use for the WAN.

1. Scroll to the WAN secon of the template, and select Add WAN.

2. Name the WAN port wan1.

3. Since you already plugged port 0 on the SSR130 into the Internet, enter ge-0/0/0 to designate it as a WAN port.

4. Make sure IP Conguraon is set to DHCP, and that Source NAT is enabled.

5. Click Add at the boom of the Edit WAN Conguraon side panel.

Dene the LAN Port

Next, associate your LAN with the appropriate port on the SSR, and give the LAN addional network services such as

DHCP.

1. Scroll to the LAN secon of the template, and select Add LAN.

2. From the Network drop-down menu, select your network segment to associate it with the LAN.

3. Enter the port used for the LAN port, for example ge-0/0/3.

4. Enter 192.168.1.1 as the IP Address to assign the WAN edge device .1 as a gateway in the network.

Autres manuels pour SSR130

Table des matières

Autres manuels Juniper Matériel réseau

Juniper

Juniper CTP1000 Series Instructions d'installation

Juniper

Juniper T1600 Manuel utilisateur

Juniper

Juniper SRX Series Manuel utilisateur

Juniper

Juniper JSA7500 Manuel utilisateur

Juniper

Juniper XRE200 - Instructions d'installation

Juniper

Juniper BTI7800 Series Guide d'installation

Juniper

Juniper SSR1300 Manuel utilisateur

Juniper

Juniper SSR1500 Instructions d'installation

Juniper

Juniper JCS1200 Mode d’emploi

Juniper

Juniper QFX10016 Manuel utilisateur

Juniper

Juniper SRX300 Series Manuel utilisateur

Juniper

Juniper WX 100 Manuel utilisateur

Juniper

Juniper Route Insight Manager Manuel utilisateur

Juniper

Juniper JSA5800 Instructions d'installation

Juniper

Juniper SSR1500 Manuel utilisateur

Juniper

Juniper JSA7800 Manuel utilisateur

Juniper

Juniper SRX5600 Manuel utilisateur

Juniper

Juniper JSA3800 Instructions d'installation

Juniper

Juniper NetScreen-5GT Wireless Manuel utilisateur

Juniper

Juniper EX4100-48P/T Manuel utilisateur

Juniper

Juniper CTP2000 Series Guide de démarrage rapide

Juniper

Juniper G10 CMTS Instructions d'installation

Juniper

Juniper Day One+ ACX7100-48L Manuel utilisateur

Juniper

Juniper NFX250 Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur