Juniper Day One+ QFX5700 Manuel utilisateur
Day One+
QFX5700
IN THIS GUIDE
Step 1: Begin | 1
Step 2: Up and Running | 10
Step 3: Keep Going | 13
Step 1: Begin
IN THIS SECTION
Meet the QFX5700 Switch | 2
Install the QFX5700 | 2
Power On | 9
In this guide, we provide a simple, three-step path, to quickly get you up and running with your new QFX5700. We've
simplified and shortened the installation and configuration steps, and included how-to videos. You'll learn how to install
an AC-powered QFX5700 in a rack, power it up, and configure basic settings. For details on how to install a DC-powered
QFX5700, see the QFX5700 Switch Hardware Guide.
Junos OS Evolved
The QFX5700 runs Junos®OS Evolved software. Junos OS Evolved is a unified, end-to-end network operating system
that provides reliability, agility, and open programmability for successful cloud-scale deployments. With Junos OS Evolved,
you can enable higher availability, accelerate your deployments, innovate more rapidly, and operate your network more
efficiently. We’ve aligned Junos OS Evolved with Junos OS so that you can seamlessly continue to manage and automate
your network.
NOTE: Are you interested in getting hands-on experience with the topics and operations covered in this guide?
Visit Juniper Networks Virtual Labs and reserve your free sandbox today! You’ll find the Junos Day One Experience
sandbox in the stand alone category.
Meet the QFX5700 Switch
The QFX5700 line supports very large, dense, and fast 400GbE IP fabrics based on proven Internet scale technology.
With 10/25/40/50/100/200/GbE interface options, the QFX5700 is an optimal choice for spine-and-leaf deployments
in enterprise, high-performance computing (HPC), service provider, and cloud provider data centers..
Install the QFX5700
IN THIS SECTION
What’s in the Box? | 3
What Else Do I Need? | 3
Install a Pre-Populated QFX5700 Using a Mechanical Lift | 3
Install an Empty QFX5700 Chassis | 6
A QFX5700 switch is shipped with an Routing Control BoardCB, FEB, two power supplies is really heavy. You'll need a
mechanical lift and someone to help you install it. If you don't have a mechanical lift, you can install an empty QFX5700
chassis and then install the components later.
2
What’s in the Box?
•QFX5700 switch
•Two power cords appropriate for your geographic location
•RJ-45 Ethernet cable
•RJ-45 to DB-9 serial port adapter
What Else Do I Need?
•Someone to help you secure the switch to the rack
•A mechanical lift rated for 250 lb (113.4 kg)
•Eighteen mounting screws appropriate for your rack
•A Phillips (+) screwdriver, number 1, 2, or 3, depending on the size of your rack-mounting screws
NOTE: Because of the size and weight of the switch, we strongly recommend that you use a mechanical lift to
install the QFX5700.
Install a Pre-Populated QFX5700 Using a Mechanical Lift
1. Review the ’General Safety Guidelines and Warnings’ in the QFX5700 Hardware Guide.
2. Wrap and fasten one end of the ESD grounding strap around your bare wrist, and connect the other end to a site ESD
point.
3. Using a Phillips screwdriver, remove the screw on each side of the chassis that holds the rear mounting-blades to the
chassis.
4. Slide the mounting blades out of the channels.
3
g101458
8
7
MST
MST
RCB 0 RCB 1
5. Load the switch onto the lift, making sure it rests securely on the lift platform.
8
7
6
5
4
3
2
1
FPC0
MST
MST
RCB0 RCB1
QFX5700
g101463
6. Using the lift, align the switch in front of the rack.
7. Carefully position the chassis in the rack until the holes of the front-mounting brackets align with the holes in the rack
rails.
4
g101459
8
7
MST
MST
RCB 0 RCB 1
QFX5700
8. Starting from the bottom, insert 5 rack mounting screws into the front mounting bracket holes on each side of the rack
and tighten them with a screwdriver.
9. On the rear of the chassis, slide the rear mounting blades into the channels on each side of the chassis until they contact
the rack rails.
g101460
8
7
MST
MST
RCB 0 RCB1
5
10. Starting from the bottom, insert 4 rack mounting screws into the rear mounting bracket holes on each side of the rack
and tighten them with a screw driver.
11. Check to see if the mounting screws are aligned on each slide of the rack and that the switch is level.
g101461
8
7
MST
MST
RCB 0 RCB 1
NOTE: If you have unused ports on RCB (Timing Ports 10MHz/1PPS IN/OUT) and FPC (Optical Ports), plug
them using dust covers to prevent dust from entering the connectors.
Install an Empty QFX5700 Chassis
WARNING: The switch weighs approximately 250 lb (113 kg). You’ll need at least three people to
help lift the chassis and mount it in the rack or cabinet. If you’re not using a mechanical lift, make sure
the chassis is empty (contains only the midplane) before you lift it.
1. Remove all components from the chassis (if installed):
•Remove the QFX5700 Routing and Control Board
•Remove the QFX5700 Forwarding Engine Board
•Remove the QFX5700 FPC
•Remove the QFX5700 Fan Tray
•Remove the AC/HVDC Power Supply
2. Wrap and fasten one end of the ESD wrist strap around your bare wrist, and connect the other end of the strap to the
ESD point on the device.
6
3. Using a Phillips screwdriver, remove the screw on each side of the chassis that holds the rear mounting blades to the
chassis.
4. Slide the mounting blades out of the channels.
g101458
8
7
MST
MST
RCB 0 RCB 1
5. With one person on each side, carefully lift the bottom of the chassis and position it in the rack so that the front
brackets are aligned with the rack holes.
g101464
8
7
6
5
4
3
2
1
FPC0
MST
MST
RCB0 RCB1
QFX5700
7
g101459
8
7
MST
MST
RCB 0 RCB 1
QFX5700
6. With two people continuing to support the chassis, have the third person install and tighten five mounting screws in
the front mounting bracket holes on each side of the rack, starting from the bottom.
7. On the rear of the chassis, slide the rear mounting blades into the channels on each side of the chassis until the rear
mounting brackets contact the rack rails
g101460
8
7
MST
MST
RCB 0 RCB1
8. Install and tighten four mounting screws into the rear mounting bracket holes on each side of the rack, starting from
the bottom.
9. Check to see that all mounting screws on each side of the rack are aligned and the switch is level.
8
g101461
8
7
MST
MST
RCB 0 RCB 1
10. If you have removed any pre-installed components, reinstall them:
•Install a QFX5700 Routing and Control Board
•Install a QFX5700 Forwarding Engine Board
•Install a QFX5700 FPC
•Install a QFX5700 Fan Tray
•Install a AC/HVDC Power Supply/DC Power Supply
Power On
Now that you’ve installed your QFX5700 in the rack, you’re ready to connect it to power.
1. Wrap and fasten one end of the ESD wrist strap around your bare wrist, and connect the other end of the strap to the
ESD point on the QFX5700.
2. Ensure that the power supplies are fully inserted in the chassis and the latches are secure.
3. Locate the AC power cords shipped with the QFX5700 switch; the cords have plugs appropriate for your geographical
location.
9
4. Insert the coupler end of the power cord into the each AC power cord inlet on the AC power supply.
g101428
1
TRAY
5. If the AC power source outlet has a power switch, turn it off.
NOTE: The QFX5700 powers on as soon as you plug it in to power. There is no power switch.
6. Plug in each power cord to the AC power source outlet.
7. If the AC power source outlet has a power switch, turn it on.
8. Verify that the status LEDs on each power supply are lit green.
Step 2: Up and Running
IN THIS SECTION
Plug and Play | 11
Customize the Basic Configuration | 11
Now that the QFX5700 is powered on, let’s do some initial configuration to get it up and running on the network. It’s
simple to provision and manage the QFX5700 using the CLI.
10
Autres manuels pour Day One+ QFX5700
1
Table des matières
Autres manuels Juniper Matériel réseau
Juniper
Juniper NSM4000 Instructions d'installation
Juniper
Juniper SSR1400 Manuel utilisateur
Juniper
Juniper SRX Series Manuel utilisateur
Juniper
Juniper NFX150 Manuel utilisateur
Juniper
Juniper JSA7800 Manuel utilisateur
Juniper
Juniper MX10004 Instructions d'installation
Juniper
Juniper EX4100-48P/T Manuel utilisateur
Juniper
Juniper Junos OS Manuel utilisateur
Juniper
Juniper SSR1500 Instructions d'installation
Juniper
Juniper JSA7800 Manuel utilisateur
Juniper
Juniper CSE2000 Manuel
Juniper
Juniper SSR1300 Manuel utilisateur
Juniper
Juniper PTX3000 Manuel utilisateur
Juniper
Juniper SRX340 Instructions d'installation
Juniper
Juniper JSA5800 Instructions d'installation
Juniper
Juniper CTP1000 Series Instructions d'installation
Juniper
Juniper G10 CMTS Instructions d'installation
Juniper
Juniper SRX320 Manuel
Juniper
Juniper 16-PORT GIGABIT ETHERNET XPIMS Manuel utilisateur
Juniper
Juniper PTX10004 Instructions d'installation
Manuels Matériel réseau populaires d'autres marques
Matrix Switch Corporation
Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur
B&B Electronics
B&B Electronics ZXT9-IO-222R2 Manuel utilisateur
Yudor
Yudor YDS-16 Manuel utilisateur
D-Link
D-Link ShareCenter DNS-320L Manuel utilisateur
Samsung
Samsung ES1642dc Instructions d'utilisation
Honeywell Home
Honeywell Home LTEM-PV Instructions de montage
