JBL 800 ARRAY Manuel utilisateur

Project ArrayTM – 800 Array

Key Specifications

Description: Three-way, 200mm (8") bookshelf speaker

Frequency response: 55Hz – 40kHz

Crossover frequencies: 1000Hz/8kHz

Power handling: 200 Watts

Sensitivity (2.83V@1m): 88dB

Nominal impedance: 8 Ohms

Dimensions (H x W x D): 743mm x 273mm x 356mm

(29-1/4" x 10-3/4" x 14")

Weight: 18kg (40 lb)

Highlights

Aluminum compression driver

Titanium tweeter

Classic JBL professional

bass driver

Unique enclosure

Seamless system integration

High-performance loudspeaker

To deliver extraordinary sonic performance in the finest home theater and music systems, JBL® Project ArrayTM models utilize

technologies directly derived from the company’s flagship K2® Series loudspeakers and professional recording studio monitors.

Project Array models include the 1400 Array, 1000 Array and 800 Array floorstanding and bookshelf loudspeakers; the 880 Array

center channel loudspeaker; and the 1500 Array powered subwoofer with built-in 1000-watt amplifier. To achieve its superla-

tive performance, the 800 Array loudspeaker features newly designed Bi-Radial®-horn compression drivers mounted vertically

in a freestanding configuration. This design eliminates enclosure diffraction effects to provide precise, ultra-stable imaging,

along with a wider, deeper, more three-dimensional soundstage.

Features

Three-way floorstanding bookshelf design featuring:

A 200mm (8") polymer-treated pulp-cone low-frequency driver with 38mm (1-1/2") copper voice coils wound on

an aluminum former.

A 045Ti 25mm (1") pure-titanium ultrahigh-frequency compression driver.

A 175Nd-3 44mm (1-3/4") Aquaplas-treated aluminum-dome high-frequency compression driver.

Utilizes a vertically oriented, enclosure-less Bi-Radial-horn configuration to provide spacious, dynamic and natural sound

quality.

Incorporates a high-performance JBL 175Nd high-frequency compression driver with an aluminum edge-wound voice coil,

neodymium motor assembly and Aquaplas-treated aluminum dome, mated to a rapid-flare phase plug and the Bi-Radial-horn

assembly.

015M transducer features a 22mm (0.88") Mylar® diaphragm, directly mounted to the top of the Bi-Radial horn. To achieve

tight, musically natural bass response, the 800 Array uses a 200mm (8") polymer-treated pulp-cone woofer.

Built to the same uncompromising quality and construction standards as every Project Array model, the 800 Array is equally

adept at movie soundtrack and music reproduction, with a smooth tonal balance; transparent, musically inviting midrange;

and open, extended high frequencies.

Project ArrayTM – 800 Array

High-performance loudspeaker

Harman Consumer Group, Inc.

2, route de Tours, 72500 Château du Loir, France • 250 Crossways Park Drive, Woodbury, NY 11797, USA • 8500 Balboa Boulevard, Northridge, CA 91329, USA

www.jbl.com

registered in the United States and/or other countries. Project Array is a trademark of Harman International Industries, Incorporated. Mylar is a registered trade-

mark of E.I. du Pont de Nemours and Company.

Features, specifications and appearance are subject to change without notice.

Autres manuels pour 800 ARRAY

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels JBL Intervenants