JBL Studio S-CENTERII Manuel utilisateur
JBL Consumer Products
250 Crossways Park Drive, Woodbury, NY 11797
8500 Balboa Boulevard, Northridge, CA 91329
800-336-4JBL (4525) (USA only)
www.jbl.com
©2001 JBL, Incorporated. JBL is a registered trademark
of JBL, Incorporated.
Part No.
ai0456
TWEETER TYPE: Pure-titanium dome with EOS™ waveguide
DESIGN GOAL: Bring the thrill of live performance and movie sound to
the homeenvironment bycalling on JBL’s professional engineering leadership.
CROSSOVER NETWORK: Straight-Line Signal Path™(SSP)
WOOFER TYPE:
Cast-aluminum basket with HeatScape™motor structure
PORT DESIGN: FreeFlow™flared
PROFESSIONAL REFERENCE: Studio Monitor
OWNER’S GUIDE PRO SOUND
COMES HOME™
PRODUCT LINE: STUDIO™SERIES
MODEL
NUMBER:
S-CENTERII
Description: 3-Way dual 5-1/4" center
Maximum Recommended
Amplifier Power:** 150W
Nominal Impedance: 8 Ohms
Sensitivity (2.83V/1m):
91dB
Frequency Response (–3dB):
75Hz –20kHz
Crossover Frequencies: 800Hz, 3200Hz
High-Frequency Transducer: 1" Pure-titanium dome, with rubber surround,
shielded; Elliptical Oblate Spheroidal™(EOS)
waveguide
Midrange Transducer: 4" PolyPlas™(polymer-coated cellulose fiber)
cone, rubber surround, shielded; Linear Field
Proximity™(LFP) bezel
Low-Frequency Transducer
:5-1/4" PolyPlas™(polymer-coated cellulose fiber)
cone, rubber surround, SFG™, magnetic shorting
rings, high-temp oversized Kapton®voice coil,
HeatScape™motor structure, cast-aluminum
baskets, shielded
Baffles: Low Diffraction, IsoPower™
Port: FreeFlow™flared
Network: Straight-Line Signal Path™(SSP)
Terminals: All-metal, gold-plated, 5-way binding posts
Dimensions (H x W x D): 7-7/8" x 20-1/2" x 9"
200mm x 521mm x 229mm
Weight: 15 lb/6.8kg
SPECIFICATIONS
*Dolby and Pro Logic are trademarks of Dolby Laboratories.
DTS is a registered trademark of Digital Theater Systems, Inc.
**The maximum recommended amplifier power rating will ensure proper system headroom
to allow for occasional peaks. We do not recommend sustained operation at these
maximum power levels.
All features and specifications are subject to change without notice.
X +
0 +
Y2
0
MHZ
X + 0 + Y
2
0M
HZ
”
TWEETER TYPE: Pure-titanium dome with EOS™waveguide
DESIGN GOAL: Bring the thrill of live performance and movie sound to
thehomeenvironment bycalling on JBL’s professional engineering leadership.
CROSSOVER NETWORK: Straight-Line Signal Path™(SSP)
PORT DESIGN: FreeFlow™flared
PROFESSIONAL REFERENCE: Studio Monitor
OWNER’S GUIDE
WOOFER TYPE:
Cast-aluminum basket with HeatScape™motor structure
PRODUCT LINE: STUDIO™SERIES
THANK YOU FOR CHOOSING JBL
For more than 50 years, JBL
has been involved in every
aspect of music and film
recording and reproduction,
from live performances to the
recordings you play in your
home, car or office.
We’re confident that the JBL
loudspeaker you have chosen
will provide every note of
enjoyment that you expected –
and that when you think
about purchasing additional
audio equipment for your
home, car or office, you will
once again choose JBL.
Please take a moment to
complete the enclosed
profile card. It enables us
to keep you posted on our
latest advancements, and
helps us to better understand
our customers and build
products that meet their
needs and expectations.
JBL Consumer Products
S-CENTERII
0-2 ft.
SPEAKER PLACEMENT
Proper placement of your
speakers is an important step
in obtaining the most realistic
soundstage possible. These
recommendations are for the
optimum placement of your
loudspeakers. Use these
placement recommendations
as a guide. Slight variations
will not diminish your
listening pleasure.
The Studio Series S-CENTERII
loudspeaker is video-
shielded and can safely be
placed near a television.
The S-CENTERII is designed
to complement all of the
Studio Series loudspeakers.
It is the ideal way to re-create
the cinematic experience in
your home.
The supplied self-adhesive felt
pads may be attached to the
bottom corners of your
S-CENTERII speaker to protect
your television or furniture.
CONNECTIONTIPS
SPEAKER CONNECTIONS
–+
Speaker Outputs
CENTER
–+
Speakers and electronics
terminals have corre-
sponding (+) and (–)
terminals. It is important to
connect both speakers
identically: (+) on the speaker
to (+) on the amplifier and (–)
on the speaker to (–) on the
amplifier. Wiring “out of
phase”results in thin sound,
weak bass and a poor
stereo image.
With the advent of
multichannel surround sound
systems, connecting
all of the speakers in your
system with the correct
polarity remains equally
important in order to
preserve the proper
ambience and directionality
of the program material.
To use the binding-post
speaker terminals, unscrew
the collar until the pass-
through hole in the center
post is visible under the
collar. Insert the bare end of
the wire through this hole;
then screw the collar down
until the connection is tight.
The hole in the center of
each collar is intended for
use with banana-type
connectors.
If there is no sound from
any of the speakers:
•Check that receiver/
amplifier is on and that
a source is playing.
•Review proper operation
of your receiver/amplifier.
If the system plays at low
volumes but shuts off as
volume is increased:
•Check all wires and
connections between
receiver/amplifier
and speakers.
•Make sure all wires are
connected. Make sure none
of the speaker wires are
frayed, cut or punctured.
•If more than one pair of
main speakers is being
used, check the minimum
impedance requirements of
your receiver/amplifier.
If there is no sound from
the center speaker:
•Check all wires and
connections between
receiver/amplifier and
speaker. Make sure all wires
are connected, and that
none of the speaker wires
are frayed, cut or punctured.
Make sure no wires are
touching other wires or
terminals and creating a
short circuit.
•If your receiver/processor
is set in Dolby* Pro Logic*
mode, make sure the center
speaker is not in phantom
mode.
•If your receiver/processor
is set in Dolby Digital or
DTS®mode, make sure the
receiver/processor is
configured so that the
center speaker is enabled.
TROUBLESHOOTING
We, Harman Consumer International
2, route de Tours
72500 Chateau-du-Loir
France
declare in own responsibility, that the
loudspeaker described in this owner’s manual is
in compliance with technical standards:
EN 50081-1:1992
EN 50082-1:1997
Luc E. Godard
Harman Consumer International
Chateau-du-Loir, France. 7/01
Autres manuels JBL Intervenants
JBL
JBL S412PII Manuel utilisateur
JBL
JBL TLX181 Manuel utilisateur
JBL
JBL Control Control 25T Manuel utilisateur
JBL
JBL MEDIA 200 Manuel utilisateur
JBL
JBL Soundfly BT Manuel utilisateur
JBL
JBL L110 Manuel utilisateur
JBL
JBL VerTec VT4889 Manuel utilisateur
JBL
JBL SR4722A Manuel utilisateur
JBL
JBL Harman PARTYBOX 200 Manuel utilisateur
JBL
JBL SP6II SoundPoint Series Manuel utilisateur
JBL
JBL FLIP 3 Manuel utilisateur
JBL
JBL MS125S/WH Manuel utilisateur
JBL
JBL CINEMA SB200 Manuel utilisateur
JBL
JBL Control Series Manuel utilisateur
JBL
JBL L112 Manuel utilisateur
JBL
JBL SB300 Manuel utilisateur
JBL
JBL LSR Manuel utilisateur
JBL
JBL 250Ti Jubilee Manuel utilisateur
JBL
JBL Charge 2 Manuel utilisateur
JBL
JBL Celebrity 100 Manuel utilisateur
Manuels Intervenants populaires d'autres marques
Bowers & Wilkins
Bowers & Wilkins 4 Manuel utilisateur
Sonance
Sonance SONOS OUTDOOR Series Manuel utilisateur
Electro-Voice
Electro-Voice EVID FM4.2 Manuel utilisateur
Pioneer
Pioneer XW-HTD630 Manuel utilisateur
Onn
Onn BWA16AA002 Manuel utilisateur
HP
HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur