Intermec EasyCoder PC4 Manuel utilisateur

Installation

Instructions

EasyCoder PC4/

PC41 Mobile

Battery Unit

ii EasyCoder PC4/PC41 Mobile Battery Unit Installation Instructions

Intermec Technologies Corporation

Corporate Headquarters

6001 36th Ave. W.

Everett, WA 98203

U.S.A.

www.intermec.com

e information contained herein is proprietary and is provided solely

for the purpose of allowing customers to operate and service Intermec-

manufactured equipment and is not to be released, reproduced, or used

for any other purpose without written permission of Intermec.

Information and speciﬁcations contained in this document are subject to

change without prior notice and do not represent a commitment on the

part of Intermec Technologies Corporation.

e word Intermec, the Intermec logo, and EasyCoder are either trade-

marks or registered trademarks of Intermec Technologies Corporation.

roughout this manual, trademarked names may be used. Rather than

put a trademark (™ or ®) symbol in every occurrence of a trademarked

name, we state that we are using the names only in an editorial fashion,

and to the beneﬁt of the trademark owner, with no intention of infringe-

ment.

ere are U.S. and foreign patents pending.

EasyCoder PC4/PC41 Mobile Battery Unit Installation Instructions iii

Contents

Before You Begin........................................................................... iv

Safety Summary.............................................................. iv

Safety Icons ..................................................................... v

Global Services and Support ........................................... vi

1 Installation

Description ...................................................................................2

Installing the Battery Unit..............................................................3

2 Operation

Operating on Battery Power...........................................................6

Replacing the Battery Pack.............................................................8

Using the Charger (accessory) ........................................................9

iv EasyCoder PC4/PC41 Mobile Battery Unit Installation Instructions

Before You Begin

is section provides you with safety information, technical support

information, and sources for additional product information.

Safety Summary

Your safety is extremely important. Read and follow all warnings and

cautions in this document before handling and operating Intermec

equipment. You can be seriously injured, and equipment and data can be

damaged if you do not follow the safety warnings and cautions.

Do not repair or adjust alone

Do not repair or adjust energized equipment alone under any circum-

stances. Someone capable of providing ﬁrst aid must always be present

for your safety.

First aid

Always obtain ﬁrst aid or medical attention immediately after an injury.

Never neglect an injury, no matter how slight it seems.

Resuscitation

Begin resuscitation immediately if someone is injured and stops breath-

ing. Any delay could result in death. To work on or near high voltage,

you should be familiar with approved industrial ﬁrst aid methods.

Energized equipment

Never work on energized equipment unless authorized by a responsible

authority. Energized electrical equipment is dangerous. Electrical shock

from energized equipment can cause death. If you must perform autho-

rized emergency work on energized equipment, be sure that you comply

strictly with approved safety regulations.

Battery pack disposal

e battery pack contains nickel/metal hydride (NiMH) cells which are

potentially dangerous to the environment. Check and follow local regula-

tions for disposal of nickel/metal hydride batteries. Do not disassemble

the battery pack and only recharge it with approved equipment from

Intermec.

EasyCoder PC4/PC41 Mobile Battery Unit Installation Instructions v

Before You Begin

Safety Icons

is section explains how to identify and understand dangers, warnings,

cautions, and notes that are in this document. You may also see icons

that tell you when to follow ESD procedures.

A warning alerts you of an operating procedure, practice,

condition, or statement that must be strictly observed to

avoid death or serious injury to the persons working on the

equipment.

A caution alerts you to an operating procedure, practice,

condition, or statement that must be strictly observed to

prevent equipment damage or destruction, or corruption or

loss of data.

is icon appears at the beginning of any procedure in this

manual that could cause you to touch components (such as

printed circuit boards) that are susceptible to damage from

electrostatic discharge (ESD). When you see this icon, you

must follow standard ESD guidelines to avoid damaging the

equipment you are servicing.

Note: Notes either provide extra information about a topic or

contain special instructions for handling a particular condition

or set of circumstances.

vi EasyCoder PC4/PC41 Mobile Battery Unit Installation Instructions

Before You Begin

Global Services and Support

Warranty Information

To understand the warranty for your Intermec product, visit the

Intermec web site at http://www.intermec.com and click Service &

Support. e Intermec Global Sales & Service page appears. From the

Service & Support menu, move your pointer over Support, and then

click Warranty.

Web Support

Visit the Intermec web site at http://www.intermec.com to download

our current documents in PDF format. To order printed versions of the

Intermec manuals, contact your local Intermec representative or distribu-

tor.

Visit the Intermec technical knowledge base (Knowledge Central) at

http://intermec.custhelp.com to review technical information or to

request technical support for your Intermec product.

Telephone Support

Contact your local Intermec representative. To search for your local rep-

resentative, from the Intermec web site, click Contact.

Who Should Read This Document?

is Installation Instructions provides you with information about how

to install the EasyCoder PC4/PC41 Mobile Battery Unit, its features and

how to operate it.

Related Documents

e Intermec web site at http://www.intermec.com contains our current

documents that you can download in PDF format. To order printed ver-

sions of the Intermec manuals, contact your local Intermec representative

or distributor.

EasyCoder PC4/PC41 Mobile Battery Unit Installation Instructions 1

1 Installation

is chapter introduces the EasyCoder PC4/PC41

Mobile Battery Unit and explains how to install the

battery unit.

2 EasyCoder PC4/PC41 Mobile Battery Unit Installation Instructions

Chapter 1 — Installation

Description

e EasyCoder PC4/PC41 printer can be ﬁtted with a battery unit that

makes it independent of a 115/230 VAC external power supply. e bat-

tery unit allows the printer to be operated approximately 8 hours and/or

print 1200 inches of labels before the battery pack must be recharged,

which takes approximately 4 hours at room temperature. Charging at

lower environmental temperature could prolong the charging time.

e battery unit is either factory-ﬁtted to the bottom of the printer and

connected to its rear plate using a short cable, or added as an accessory.

If your battery unit is factory-ﬁtted, skip the section on Installing the

Battery Unit.

e printer’s power supply adapter (PSA) is either used to drive the bat-

tery unit or to drive the printer directly. e PSA is powered by 100 to

240 VAC, 50 to 60 Hz from a common wall socket.

e battery pack inside the battery unit will be charged when the power

switch of the battery unit is on.

To print, switch on the power to the printer ﬁrst, then switch on the bat-

tery unit.

With a battery unit, there are several ways to supply the printer with

power:

1Directly from a wall socket via the PSA.

2From a wall socket via the battery unit which allows the internal bat-

tery pack to be automatically charged.

3From the battery unit without any connection to a wall socket.

If you have a spare battery pack, you can simply pull out the empty

battery pack from the battery unit and replace it with a charged battery

pack. Always switch oﬀ the power to the battery unit before changing the

battery pack.

Furthermore, with a charger and a spare battery pack, you can charge an

empty battery pack while running the printer from the charged battery

inserted in the battery unit. e charger uses the same type of PSA as the

printer/battery unit.

To obtain full capacity in a new battery pack, it should be charged and

discharged at least three times.

EasyCoder PC4/PC41 Mobile Battery Unit Installation Instructions 3

Chapter 1 — Installation

Installing the Battery Unit

1Lower the printer

on the battery unit.

Make sure the four

screws on the bat-

tery unit go in to

the corresponding

holes in the printer.

2Push the printer backwards,

keeping the battery unit

still. Make sure the printer

is aligned with the battery

unit, as shown in the illus-

tration below.

4 EasyCoder PC4/PC41 Mobile Battery Unit Installation Instructions

Chapter 1 — Installation

3Tip the printer backwards.

Using a Philips (cross-tip)

screwdriver, tighten the

screw located in the opening

shown to the right.

4Connect the power

cord from the battery

unit to the printer.

Turn the printer on

ﬁrst, then switch the

battery unit on.

Autres manuels pour EasyCoder PC4

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Intermec Accessoires pour imprimantes

Intermec

Intermec EasyCoder 601XP Manuel utilisateur

Intermec

Intermec EasyCoder PF2i Manuel utilisateur

Intermec

Intermec EasyCoder PF2i Manuel utilisateur

Intermec

Intermec PM4I Manuel utilisateur

Intermec

Intermec 3400 Manuel utilisateur

Intermec

Intermec EasyCoder PD41 Manuel utilisateur

Intermec

Intermec EasyCoder PD41 Manuel utilisateur

Intermec

Intermec EasyCoder 501 SA Manuel utilisateur

Intermec

Intermec PB42 Manuel

Intermec

Intermec EasyCoder 501XP Manuel utilisateur

Intermec

Intermec EasyCoder PF4i Manuel utilisateur

Intermec

Intermec EasyCoder 3400e Manuel utilisateur

Intermec

Intermec 869 RFID Reader Mode d'emploi

Intermec

Intermec PB41 Manuel utilisateur

Intermec

Intermec EasyCoder F2 Manuel utilisateur

Intermec

Intermec EasyCoder 3400e Manuel utilisateur

Intermec

Intermec EasyCoder F4 Manuel utilisateur

Intermec

Intermec EasyCoder PF2i Manuel utilisateur

Intermec

Intermec EasyCoder PF4ci Manuel utilisateur

Intermec

Intermec EasyCoder PD4 Manuel utilisateur

Intermec

Intermec EasyCoder 3400e Manuel utilisateur

Intermec

Intermec PB2 Series Manuel

Intermec

Intermec EasyCoder 501XP Manuel utilisateur

Intermec

Intermec 3240 Manuel utilisateur

Manuels Accessoires pour imprimantes populaires d'autres marques

Star Micronics

Star Micronics TSP800 Series Manuel utilisateur

REA

REA JET HR pro 2K Manuel utilisateur

HP Laserjet,Color Laserjet 4si Manuel utilisateur

oliser

oliser MS 45 Manuel utilisateur

Roland

Roland DU2-64 Instructions et recettes

Xerox

Xerox EFI EXP6000 Manuel utilisateur

Canon

Canon Finisher-T1 Manuel utilisateur

Sharp

Sharp FO-1MK Manuel utilisateur

Labelmate

Labelmate PM-300 Manuel utilisateur

Epson

Epson T6248 Manuel d'utilisation

Epson

Epson OT-BZ20 Manuel utilisateur

Canon

Canon TonerRobot EP-27 Manuel utilisateur

Ricoh

Ricoh LCIT RT5100 Guide de démarrage rapide

GBC

GBC 16 Series Manuel utilisateur

Canon

Canon INNER 2-WAY TRAY-E1 Manuel d'utilisation et d'entretien

Develop

Develop SD-509 Manuel utilisateur

Kyocera

Kyocera KM-6230 Manuel

Triumph Adler

Triumph Adler DF-710 Manuel