Intermec CK30 Manuel

CK30 Handheld Computer Operator’s Guide

Battery

latch

8:29PM

8:29 PM

8:29PM

8:29 PM

8:29PM

8:29 PM

8:29PM

8:29 PM

8:29PM

8:29 PM

I/O

ABCD

Scan button

Good Read light

Trigger

CK30

ABCD

Empty

8:29PM

8:29 PM

LowHalf full

Turn on the CK30.

Press I(the Power key) to turn on the CK30. When you

turn on the CK30, the screen turns on. If the screen does

not turn on, install a charged battery.

Check the battery level.

Turn on the backlight.

Change the contrast.

Change the beeper volume.

Press and release B (the Orange key),

and then press and release E

to change the contrast.

Scan a bar code.

Point the CK30 at the bar code.

Press the Scan button or pull the trigger.

If your CK30 has a laser scanner, a red spot or narrow beam of light appears

near the bar code.

If your CK30 has an imager, a wide beam of light appears near the bar code.

Move the CK30 so the spot or beam is centered on the bar code.

When the Good Read light turns on, the bar code has been scanned.

Press Ito turn oﬀ the

CK30.

Press down on the latch

and lift the battery out of

the CK30.

Insert the tabs on the

new battery into the

bottom of the opening.

Press the battery in

place to snap the latch.

Press and release C(the Green key), and then press

and release Eto change the beep volume.

If the battery is low, change it.

Press E(the Backlight key) to turn on the backlight.

The backlight makes the screen easier to see in dark

areas.

Depending on the kind of scanner your CK30 has, you may

need to move the CK30 closer to or farther from the bar code. 6001 36th Avenue West

Everett, WA 98203

U.S.A.

www.intermec.com

CK30 Handheld Computer Operator’s Guide

*073407-001*

P/N 073407-001

Icons appear on

the screen when

the battery is

not fully charged.

CK30 Handheld Computer Operator’s Guide

Using the Screen Icons

While you use the CK30, icons appear at the bottom of the screen to help you keep track of the battery and network connections. See the next

table to learn what the icons mean.

Icon Means

Battery is half full. You should be able to work for several more hours before changing batteries.

Battery is almost empty. You need to install a charged battery as soon as possible.

Battery is empty. Install a charged battery right away!

Ethernet connection to the network is active.

No Ethernet connection to the network. Make sure the cable is connected properly

and contact your supervisor.

Excellent radio connection to the network.

Good radio connection to the network. You might need to move to get a better connection.

Bad radio connection to the network. Try moving until you get a better connection.

No radio connection to the network. You need to move until you get reconnected.

Orange key is pressed.

Green key is pressed.

Using the Keypad

See the next illustration to ﬁnd the locations of the Power (I), Backlight (E), Orange (B), and Green (C) keys on your CK30.

More Information

For more information on operating the CK30, see the CK30 Handheld Computer Quick Start Guide (P/N 073389) or the CK30 Handheld Computer

User’s Manual (P/N 073528).

8:29 PM

Icons appear here

pace

“

‘

PROG

{}

[]

Backlight key

Green key

Orange key

Power key

789

456

Esc

Alt

Ta b

Backlight key

Green key

Orange key

Power key

PROG

[]

(

)

123

456

Backlight key

Green key

Orange key

Power key

PROG

Autres manuels pour CK30

Table des matières

Autres manuels Intermec portable

Intermec

Intermec CN4 Manuel utilisateur

Intermec

Intermec 730 Manuel utilisateur

Intermec

Intermec CN2G Manuel utilisateur

Intermec

Intermec CK30 Manuel utilisateur

Intermec

Intermec Janus 2020 Manuel utilisateur

Intermec

Intermec CN3NI Manuel utilisateur

Intermec

Intermec CN51 Mode d’emploi

Intermec

Intermec CK71 Manuel utilisateur

Intermec

Intermec CN50 Manuel utilisateur

Intermec

Intermec CN2A Manuel utilisateur

Intermec

Intermec 730 Color Manuel utilisateur

Intermec

Intermec CN50 Manuel utilisateur

Intermec

Intermec CN3 Series Manuel utilisateur

Intermec

Intermec CN30 Manuel utilisateur

Intermec

Intermec CN50 Manuel utilisateur

Intermec

Intermec CN2G Manuel utilisateur

Intermec

Intermec CK3R Manuel utilisateur

Intermec

Intermec 700 Series Manuel utilisateur

Intermec

Intermec PEN*KEY 6400 Manuel utilisateur

Intermec

Intermec 700 Series 700 Manuel utilisateur

Intermec

Intermec CK32IS Manuel

Intermec

Intermec 730 Manuel utilisateur

Intermec

Intermec CN3E Series Manuel

Intermec

Intermec CN4 Manuel utilisateur

Manuels portable populaires d'autres marques

Honeywell

Honeywell Dolphin 9900 Manuel utilisateur

Honeywell

Honeywell CN75 Manuel utilisateur

MiTAC

MiTAC Mio 168 Manuel utilisateur

Wasp

Wasp WDT92 Manuel utilisateur

Texas Instruments

Texas Instruments TI-Nspire Manuel utilisateur

AXEM Technology

AXEM Technology MBS Manuel utilisateur

Armstrong

Armstrong Brain Wave Instructions de montage

Unitech

Unitech TB128 Manuel utilisateur

Symbol

Symbol MC9000-G Manuel d'installation et d'exploitation

Unitech

Unitech HT1 1D Batch Manuel utilisateur

Ingenico

Ingenico IWL220 GPRS Manuel utilisateur

Symbol

Symbol c2000 Manuel utilisateur

Symbol

Symbol MC18 Manuel d'installation et d'exploitation

Acer

Acer n20 Manuel utilisateur

Docomo

Docomo F-04H Manuel utilisateur

Toshiba

Toshiba e350 Series Manuel utilisateur

Palm

Palm Tungsten E2 Manuel

Alien

Alien ALR-H460 Manuel utilisateur