Intermec 751G Instructions d'installation et d'utilisation
751G NI
Handheld Computer
Addendum
ii 751G NI Handheld Computer Addendum
Intermec Technologies Corporation
Worldwide Headquarters
6001 36th Ave.W.
Everett, WA 98203
U.S.A.
www.intermec.com
The information contained herein is provided solely for the purpose of allowing customers to operate and
service Intermec-manufactured equipment and is not to be released, reproduced, or used for any other purpose
without written permission of Intermec Technologies Corporation.
Information and specifications contained in this document are subject to change without prior noticed and do
not represent a commitment on the part of Intermec Technologies Corporation.
© 2007 by Intermec Technologies Corporation. All rights reserved.
The word Intermec, the Intermec logo, Norand, ArciTech, Beverage Routebook, CrossBar, dcBrowser,
Duratherm, EasyADC, EasyCoder, EasySet, Fingerprint, INCA (under license), i-gistics, Intellitag, Intellitag
Gen2, JANUS, LabelShop, MobileLAN, Picolink, Ready-to-Work, RoutePower, Sabre, ScanPlus, ShopScan,
Smart Mobile Computing, SmartSystems, TE 2000, Trakker Antares, and Vista Powered are either trademarks
or registered trademarks of Intermec Technologies Corporation.
There are U.S. and foreign patents as well as U.S. and foreign patents pending.
751G NI Handheld Computer Addendum 3
751G Non-Incendive (NI) Handheld Computer Addendum
This addendum explains the hardware and software differences between the
751 “standard” (Windows Mobile 5.0) Mobile Computers and the 751G
(Windows Mobile 5.0) Mobile Computer. These differences include:
• no Bluetooth radio
• Common Access Card (CAC) support
• ability to disable the 802.11 b/g radio
• ability to change the radio country code
• more extensive NI certification rating
Operating System
The 751G runs Windows Mobile 5.0 only.
Bluetooth Radio
By design, the 751G does not provide power for Bluetooth; the 751G will
not recognize Bluetooth radio devices.
Common Access Card Interface
You can use the Common Access Card (CAC) reader with the 751G. You
will need to install a CAC adapter before you can attach the CAC reader.
The CAC adapter plugs into the top of the 751G and replaces the SD
cover.
The CAC reader allows applications to read and write to SmartCards using
the Microsoft Resource Manager. You will need to install the following to
use this feature:
• 751G CAC Adapter (P/N 074202)
• Common Access Card (CAC) Reader (P/N 074102)
Assured Radio Deactivation
The Assured Radio Deactivation feature allows you to deactivate 802.11
radio transmission. Once deactivated, the radio remains off until it is re-
activated.
To access Assured Radio Deactivation
1Tap the iConnect icon ( ) in the bottom right corner of the
Windows Mobile Start Screen.
2The iConnect menu appears with these options:
4 751G NI Handheld Computer Addendum
3Select Enable. The menu that then appears allows you to choose from
these options:
4To toggle the radio state, tap Assured Radio Deactivation.
The 751G immediately cold boots, and when restarting, your 751G
displays a dialog box with this message:
5Tap OK and a green (safe) status indicator displays in the bottom right
corner of the display. This green symbol indicates the radio is
deactivated and the 751G radio is transmitting no RF energy.
When you tap the iConnect menu item Assured Radio Deactivation to
toggle on (or off) this radio deactivation feature, the 751G immediately
cold boots and returns to operation in the selected state (either off or on).
When cold booting, your 751G displays the state of Assured Radio
Deactivation, which appears in the dialog box following the restart.
Assured Radio Deactivation Indicators
Indicator
Assured Radio
Deactivation Radio State
iConnect
indicator
color Transmit State
DOn Deactivated Green No radio transmission.
Safety on:
• No RF energy
transmitted.
XOff Active Red Radio can transmit.
Safety off:
• RF energy transmitted.
751G NI Handheld Computer Addendum 5
Configuring the 751G With the Setup Assistant
The Setup Assistant starts automatically the first time you turn on the
751G. Use the Setup Assistant to set or enable basic network parameters
and connect your 751G to the network. Use Intermec Settings to update
any of your device settings.
The Setup Assistant guides you through setting the following basic network
parameters:
• Date and time (including time zone)
• SSID (Network name)
• 802.1x security
• DHCP server or IP address, subnet mask, and default router
• Primary and secondary DNS and WINS addresses
• Device name
• Radio country code.
To set other parameters, use the Intermec Settings or another configuration
method.
To use the Setup Assistant
1Setup Assistant starts automatically the first time you turn on your
751G.
2Tap Next to start using Setup Assistant.
6 751G NI Handheld Computer Addendum
3Set the date.
4Set the time.
5Set the daylight time if you want to automatically adjust the clock for
daylight savings time changes.
751G NI Handheld Computer Addendum 7
6Tap Yes if you want to configure the radio country code. If you choose
Yes, you will also need to tap the keyboard icon on the display and enter
the password which is cfg802bg.
7Scroll through the list and select the radio country code you want to use.
8 751G NI Handheld Computer Addendum
8Tap Yes to set up any 802.11 security settings. The 751G uses the
standard 802.11 wireless security features. Available under AIT-3 CLIN
0040, FIPS (Federal Information Processing Standard) security can be
ordered separately
9Tap Yes if you want to obtain the IP address from a DHCP server or tap
No if you want to specify the IP address.
751G NI Handheld Computer Addendum 9
10 Specify a device name for the 751G.
11 Tap Yes if you want your settings to be saved if you cold boot the 751G
or tap NO if settings can be deleted.
Worldwide Headquarters
6001 36th Avenue West
Everett, Washington 98203
U.S.A.
tel 425.348.2600
fax 425.355.9551
www.intermec.com
751G NI Handheld Computer Addendum
*941-006-002*
P/N 941-006-002
Autres manuels pour 751G
6
Ce manuel convient aux modèles suivants
1
Autres manuels Intermec portable
Intermec
Intermec 700 Series Manuel utilisateur
Intermec
Intermec CN50 Manuel utilisateur
Intermec
Intermec CN2B Manuel utilisateur
Intermec
Intermec CK70 RFID Manuel utilisateur
Intermec
Intermec 200 Manuel utilisateur
Intermec
Intermec 700 Series Manuel utilisateur
Intermec
Intermec 700 Series 700 Manuel utilisateur
Intermec
Intermec PEN*KEY 6400 Manuel utilisateur
Intermec
Intermec Oracle-Ready CK31 Manuel utilisateur
Intermec
Intermec 700 Series Manuel utilisateur
Intermec
Intermec CK70NI Manuel utilisateur
Intermec
Intermec 730 Manuel utilisateur
Intermec
Intermec CK1 Serial Dock Manuel utilisateur
Intermec
Intermec CK32IS Manuel
Intermec
Intermec CN70NI Manuel utilisateur
Intermec
Intermec CN4 Manuel utilisateur
Intermec
Intermec CN50 Manuel utilisateur
Intermec
Intermec CK32 Manuel utilisateur
Intermec
Intermec CS40 Vehicle Power Adapter Manuel utilisateur
Intermec
Intermec CK3 Series Manuel utilisateur
