Intermec CK70 RFID Manuel utilisateur
DRAFT
70 Series
Mobile Computer
CK70, CK70NI, CK71, CK71NI, CN70, CN70NI, CN70e, CN70eNI,
CK70 RFID, CN70e RFID, CN70 RFID
User Manual
DRAFT
ii 70 Series Mobile Computer User Manual
Intermec Technologies Corporation
Worldwide Headquarters
6001 36th Ave.W.
Everett, WA 98203
U.S.A.
www.intermec.com
The information contained herein is provided solely for the purpose of allowing customers to
operate and service Intermec-manufactured equipment and is not to be released, reproduced, or
used for any other purpose without written permission of Intermec Technologies Corporation.
Information and specifications contained in this document are subject to change without prior
notice and do not represent a commitment on the part of Intermec Technologies Corporation.
© 2011–2013 by Intermec Technologies Corporation. All rights reserved.
The word Intermec, the Intermec logo, Norand, ArciTech, Beverage Routebook, CrossBar,
dcBrowser, Duratherm, EasyADC, EasyCoder, EasySet, Fingerprint, i-gistics, INCA (under license),
Intellitag, Intellitag Gen2, JANUS, LabelShop, MobileLAN, Picolink, Ready-to-Work, RoutePower,
Sabre, ScanPlus, ShopScan, Smart Mobile Computing, SmartSystems, TE 2000, Trakker Antares,
and Vista Powered are either trademarks or registered trademarks of Intermec Technologies
Corporation.
There are U.S. and foreign patents as well as U.S. and foreign patents pending.
Wi-Fi is a registered certification mark of the Wi-Fi Alliance.
Microsoft, Windows, and the Windows logo are registered trademarks of Microsoft Corporation
in the United States and/or other countries.
Bluetooth is a trademark of Bluetooth SIG, Inc., U.S.A.
DRAFT
70 Series Mobile Computer User Manual iii
Document Change Record
This page records changes to this document. The document was
originally released as Revision 001.
Version
Number Date Description of Change
006 01/2013 Added information to support Intermec RFID
standalone demonstration application for these
mobile computers: CK70 RFID, CN70e RFID, and
CN70 RFID.
005 11/2012 Added information to support firmware version
1.50:
•CloneNGo application
•New camera settings
•SceneEditor application
•EA30 imager extended reading range
004 2/2012 Revised information on ScanNGo bar codes.
003 12/2011 Added information on:
•the flashlight feature.
•the Carrier Selection application.
Revised information on:
•the Intermec Settings menus.
•upgrading the system software and the
operating system.
•GPS procedures.
•ScanNGo bar codes.
002 06/2011 Revised to add information on
non-incendive (NI) versions of the computer,
provisioning the computer, the new
ScanDiagnostics application, and how to use the 70
Series as a USB mass storage device. Also corrected
the cold boot procedure and removed the compass.
DRAFT
1
1
About the Computer Features
This chapter introduces the 70 Series Mobile Computers with
Windows® Embedded Handheld operating system. Use this
chapter to learn about the basic features and functions of each
computer, as well as the available accessories for it.
DRAFT
Chapter 1 — About the Computer Features
2 70 Series Mobile Computer User Manual
About the 70 Series Mobile Computers
The ergonomically designed Intermec 70 Series Mobile Computers are
built on the Microsoft Windows Embedded Handheld operating
system. They are lightweight, easy-to-use, and run most software
developed for the Windows Embedded platform, including
standalone, client-server, and browser-based applications.
The 70 Series family of computers consists of four different models:
the CN70, CN70e, CK70 and CK71. The CN70 and CN70e have the
same features except that the CN70e offers a larger keypad for
data-input intensive applications. The CK70 and CK71 have most of
the same features, but the CK71 offers a choice of imager options and
does not offer a WWAN radio option (phone). For hazardous
environments, Intermec offers non-incendive (NI) models of each 70
Series computer. Throughout this manual, all versions of the mobile
computer are referred to as 70 Series unless information is specific to
a particular model of computer.
In most of the user manual, pictures of the CN70 and CK70 represent
the four models of the 70 Series computers. The Intermec RFID Demo
IM11 handheld computers (CK70 RFID, CN70e RFID, and CN70
RFID) have a visual RFID label indicated on the Front View.
CN70 Front View
Scan button
On/o button
Microphone
Cell phone speaker
Notification LED
Good read LED
Battery status LED
DRAFT
Chapter 1 — About the Computer Features
70 Series Mobile Computer User Manual 3
CN70 Back View
CK70 and CK71 Front View
IrDa port
Speaker port
Imager
Camera
Battery
Scan button
Microphone
On/o button
Cell phone speaker
Notification LED
Good read LED
Battery status LED
DRAFT
Chapter 1 — About the Computer Features
4 70 Series Mobile Computer User Manual
CK70 and CK71 Back View
What’s New in This Release
This version of the user manual supports the following new features:
•Intermec 70 Series RFID Demo IM11 application allows users to
read and write RFID tags without the use of an outside application
such as Notepad or Excel. For more information, see “About
Intermec 70 Series RFID Demo” on page 48.
Overview of 70 Series Features
The 70 Series includes these standard features:
•EA30 area imager that can read bar codes and capture images
•(CK71 only) Choice of EA30, EX25, or EV12 imagers
•Multi-processor architecture with 512 MB DRAM and 1G Flash
•CDMA, UMTS, or Flexible Network Radio capability (not available
on CK71)
•802.11a/b/g/n and Bluetooth® radios
•GPS radio on CDMA, UMTS, or Flexible Network Radio
computers (not available on CK71)
Imager
Camera
IrDA port
Battery
IrDA port
Imager
Camera
Battery
Left speaker
port Left speaker
port
DRAFT
Chapter 1 — About the Computer Features
70 Series Mobile Computer User Manual 5
•5-megapixel auto-focus color camera
•Customer-accessible microSD slot for memory cards up to 32 GB
•Customer-accessible SIM card slot
•IrDA port with speeds up to 4 Mbps
•Intermec RFID Demo (models: CK70 RFID, CN70e RFID, and
CN70 RFID) integrated with UHF reader allows users to scan and
write data to RFID tags
About the Status LEDs
Use the following illustrations and table to understand the status
LEDs on your computer. All six status LEDS are not available on every
70 Series computer. For example, the QWERTY versions of the CN70
and CN70e do not have a Green key status LED.
Location of the CN70 Status LEDs
The 70 Series Mobile Computer with an IEEE 802.11a/b/g/n
radio installed is Wi-Fi® certified for interoperability with
other 802.11a/b/g/n wireless LAN devices.
Green key
status LED
Shift key
status LED
Orange key
status LED
Battery status LED
Good Read and Ready-to-Work
Status LED
Notification LED
DRAFT
Chapter 1 — About the Computer Features
6 70 Series Mobile Computer User Manual
Location of the CK70 and CK71 Status LEDs
Status LED Descriptions
LED Color Description
Notification Amber This LED is user-programmable.
Good Read Green The computer successfully decoded a bar code or
an RFID tag.
Ready-to-Work Blue If you have Intermec Terminal Emulator (ITE),
the application is running and connected to the
host.
If you do not have ITE, you can configure the
Ready-to-Work indicator to turn on or off to
indicate a healthy state.
Blinking
blue
ITE is running but not connected to the host.
The computer is unhealthy.
Off ITE is not installed or not running.
The computer is healthy.
Battery See “About Battery Status” on page 13.
Green key
status LED
Shift key status LED
(CK70 alphanumeric
and CK71 function numeric)
Shift key status LED
(CK70 numeric and
CK71 alphanumeric)
Orange key
status LED
Notification LED Good Read and Ready-to-Work
status LED
Battery status LED
DRAFT
Chapter 1 — About the Computer Features
70 Series Mobile Computer User Manual 7
70 Series Accessories
The 70 Series computer ships with a battery. All other accessories are
sold and ordered separately. For help, contact your local Intermec sales
representative.
70 Series Accessories
Key Status Green The Green function key is enabled.
When writing RFID tags, a Good Read LED will
blink on Green if a write is successful.
Orange The Orange function key is enabled.
Shift Red The Shift key is enabled.
When writing RFID tags, the Battery Status LED
will turn on Red for 1 second and then return to
its previous state if a write is unsuccessful.
LED Color Description
Accessory Description
Audio Snap-On Adapter Use the audio adapter to connect the
computer to a headset.
Back Accessory Interface Use the back accessory interface to attach
accessories such as the magstripe reader
adapter to the CK70 and CK71.
CK70/CK71 Battery This battery provides main power to the
CK70 and CK71.
CK70/CK71 Magstripe Reader
Adapter
Use the magnetic stripe reader to be able
to read magnetic cards with the CK70 and
CK71 computer.
CN70/CN70e Battery This battery provides main power to the
CN70 and CN70e.
CN70/CN70e Magstripe Reader
Snap-On Adapter
Use the magnetic stripe reader to be able
to read magnetic cards with the CN70
and CN70e computer.
Desktop Stand Use the desktop stand to hold the 70
Series computer on your desk or a stable
surface.
Autres manuels pour CK70 RFID
8
Ce manuel convient aux modèles suivants
10
Table des matières
Autres manuels Intermec portable
Intermec
Intermec 751G Instructions d'installation et d'utilisation
Intermec
Intermec 6640 Manuel d'utilisation et d'entretien
Intermec
Intermec CN2 Manuel utilisateur
Intermec
Intermec CK30 Manuel utilisateur
Intermec
Intermec CN3 Series Manuel utilisateur
Intermec
Intermec CS40 Vehicle Power Adapter Manuel utilisateur
Intermec
Intermec CN2B Manuel utilisateur
Intermec
Intermec CN3 Series Manuel utilisateur
Intermec
Intermec Janus 2050 Manuel utilisateur
Intermec
Intermec CN70e 1000CP02W Manuel utilisateur
Intermec
Intermec CN2G Manuel utilisateur
Intermec
Intermec 751G Manuel utilisateur
Intermec
Intermec 600 Series 600 Manuel utilisateur
Intermec
Intermec CK61 Manuel utilisateur
Intermec
Intermec CN2B Manuel utilisateur
Intermec
Intermec CN3 Series Manuel utilisateur
Intermec
Intermec CN2B Manuel utilisateur
Intermec
Intermec CK70 RFID Manuel utilisateur
Intermec
Intermec Data Collection PC Manuel utilisateur
Intermec
Intermec CN51 Manuel utilisateur
