Intermec CN2 Manuel utilisateur

Specifications

Dimensions: Approximately 12 cm x 8.5 cm x

12 cm (4.7 in x 3.3 in x 4.7 in)

Electrical rating: x5V 2A

Requires Intermec AC power supply

(P/N 074246)

v100 to 240V, 50-60 Hz

Operating temperature: 0°C to 50°C (32°F to 122°F)

Storage temperature: -10°C to 50°C (14°F to 122°F)

Relative humidity: 5% to 95% non-condensing

6001 36th Avenue West

Everett, WA 98203

U.S.A.

www.intermec.com

CN2 Communications Dock Quick Start Guide

*074755-001*

P/N 074755-001

CN2 Communications Dock Quick Start Guide

You can use the CN2 Communications Dock (P/N 074248) to:

• provide power to the CN2.

• charge the battery while it is in the CN2.

• transfer data and applications through a USB (universal serial

bus) Type B connection.

This guide describes how to install and use the communications

dock.

Communications dock

CN2Communications Dock QuickStart Guide

Documentation

Shipping Package Contents: This illustration shows the contents of the CN2

communications dock kit.

To use the communications dock you also need these items (sold

and ordered separately):

• USB interface cable (P/N 321-576-002)

• Power supply (P/N 074246)

• Country-specific power cord

You must use the appropriate Intermec power

supply with this device or equipment damage may

occur.

Installing the Communications Dock

1 Place the communications dock on a flat, stable, and clean

surface that is within 1.5 m (5 ft) of an AC outlet.

2 Connect the power supply to the Power port on the back of

the communications dock.

Power

port

USB

port

3 Connect the other end of the power supply to an AC power

outlet.

Power

supply

Power light

The green Power light on the front of the communications

dock turns on. The communications dock is now ready to

charge a battery in a CN2.

Note: The light on the left side of the communications

dock is not used.

4 (Optional) Connect a USB Type B communications cable to

the USB port on the back of the communications dock and

connect the other end of the cable to a USB device.

Charging the CN2

• Remove the serial port plug from the serial port, and place the

CN2 in the communications dock. The battery is fully charged

in approximately 4 hours.

Troubleshooting

If you are having problems operating the communications dock,

make sure that the:

• battery is correctly installed in the CN2.

• CN2 is firmly seated in the communications dock.

• power supply is properly connected to a powered AC outlet.

• charging pins on the communications dock are clean. To clean

the charging pins, rub them with a pencil eraser and remove

any eraser debris.

USB Port Pin Assignments

VBUS

UDC-

UDC

GND

Autres manuels pour CN2

Ce manuel convient aux modèles suivants

Autres manuels Intermec Station d'accueil

Intermec

Intermec AD11 Manuel utilisateur

Intermec

Intermec CN3 Series Manuel utilisateur

Intermec

Intermec AV11 Manuel utilisateur

Intermec

Intermec CN3 Series Manuel utilisateur

Intermec

Intermec Janus 2020 Manuel utilisateur

Intermec

Intermec 700 Series Manuel utilisateur

Intermec

Intermec AV8 Manuel utilisateur

Intermec

Intermec CK60 Ethernet Multidock Manuel utilisateur

Intermec

Intermec AV8 Manuel utilisateur

Intermec

Intermec AD24 Manuel utilisateur

Intermec

Intermec AD8 Manuel utilisateur

Intermec

Intermec AD2 Manuel utilisateur

Intermec

Intermec AV6 Manuel utilisateur

Intermec

Intermec CK1 Serial Dock Manuel utilisateur

Intermec

Intermec AV6 Manuel utilisateur

Intermec

Intermec PEN*KEY 6400 Manuel utilisateur

Intermec

Intermec FlexDock Manuel utilisateur

Intermec

Intermec AD1 Manuel utilisateur

Intermec

Intermec DX4 Quad Dock Manuel utilisateur

Intermec

Intermec CN2A Manuel utilisateur

Intermec

Intermec FlexDock DX1 Manuel utilisateur

Intermec

Intermec 700 Series 700 Manuel utilisateur

Intermec

Intermec AV10 Manuel utilisateur

Intermec

Intermec PEN*KEY 6100 Manuel utilisateur

Manuels Station d'accueil populaires d'autres marques

Sony

Sony Dream Machine XDR-DS12iP Manuel utilisateur

Acer

Acer USB Type-C Dock II Manuel utilisateur

ATEN

ATEN UC-2000 Manuel utilisateur

Xcellon

Xcellon HDD-202 Manuel utilisateur

Dok

Dok CR09 Manuel utilisateur

Philips

Philips BTM630/12 Manuel utilisateur

IOGear

IOGear Travel Pro GUD3C09 Manuel utilisateur

RKI

RKI SDM-E2 Manuel utilisateur

iHome

iHome iP15 Manuel utilisateur

VITURE ONE

VITURE ONE MOBILE DOCK Manuel utilisateur

Lindy

Lindy 42984 Manuel utilisateur

CipherLab

CipherLab 8001 Manuel utilisateur

Pyle

Pyle PIPDSP2 Manuel utilisateur

Avol

Avol AS2350 Manuel utilisateur

Datalogic

Datalogic JoyaTouch Manuel utilisateur

Philips

Philips DC190/79 Manuel utilisateur

Targus

Targus DOCK315EUZ Manuel utilisateur

Akasa

Akasa DuoDockX3 AK-DK08U3-BK Manuel utilisateur