Intellinet 525206 Manuel utilisateur

WIRELESS

300N USB

ADAPTER

USER

MANUAL

MODEL 525206

INT-525206-UM-1111-01

Federal Communications Commission

Interference Statement

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

1. Re-orient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver.

3. Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

4. Consult the dealer or an experienced radio technician for help.

FCC Caution

This device and its antenna must not be co-located or operating in conjunction with

any other antenna or transmitter.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) this device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for

compliance could void the authority to operate equipment.

Federal CommunicationsCommission (FCC) Radiation Exposure

Statement

This EUT is in compliance with SAR for general population/uncontrolled exposure

limits in ANSI/IEEE C95.1-1999 and had been tested in accordance with the

measurement methods and procedures specified in OET Bulletin 65 Supplement C.

The equipment version marketed in the U.S. is restricted to usage of channels 1-11

only.

R&TTE Compliance Statement

This equipment complies with all the requirements of Directive 1999/5/EC of the

European Parliament and the Council of March 9, 1999, on radio equipment and

telecommunication terminal equipment and the mutual recognition of their conformity

(R&TTE).

Safety

This equipment is designed with the utmost care for the safety of those who install and

use it. However, special attention must be paid to the dangers of electric shock and

static electricity when working with electrical equipment. All guidelines of this and of

the computer manufacturer must therefore be allowed at all times to ensure the safe

use of the equipment.

EU Countries Intended for Use

The ETSI version of this device is intended for home and office use in Austria,

Belgium, Denmark, Finland, France, Germany, Greece, Ireland, Italy, Luxembourg,

the Netherlands, Portugal, Spain, Sweden and the United Kingdom.

The ETSI version of this device is also authorized for use in EFTA member states:

Iceland, Liechtenstein, Norway and Switzerland.

EU Countries Not Intended for Use

None.

Contents

1 Introduction ............... .........................................................................1

1.1 Features .........................................................................................................1

1.2 Specifications .................................................................................................1

2 Installation Procedure........... ............................................................ 3

3 Configuration Utility........................................................................... 9

3.1 Utility Overview...............................................................................................9

3.2 Available Network ........................................................................................11

3.3 General ........................................................................................................12

3.4 Profile........................................................................................................... 13

3.4.1 Configure the Profile .................. .........................................................14

3.5 Status........................................................................................................... 18

3.6 Statistics ...................................................................................................... 18

3.7 Wi-Fi Protect Setup (WPS) ..........................................................................19

3.8 Software AP..................................................................................................22

3.8.1 AP Properties Setting .......... ............................................................23

3.8.2 AP Advanced ........... ........................................................................23

3.8.3 AP Statistics............. .......................................................................... 24

3.8.4 ICS............ ....................................................................................... 25

1 Introduction

Thank you for purchasing the INTELLINET NETWORK SOLUTIONS™ Wireless 300N USB Adapter,

Model 525206.By following the simple steps in this user manual, you will soon be able to enjoy the

helpful features listed below that make this item such a popular selection.

1.1 Features

Connects your desktop PC or notebook to a wireless network

Up to 300 Mbps network link speed

Equipped with a powerful 3 dBi high-gain antenna

Supports WMM (Wi-Fi Multimedia) for increased multimedia data throughput

Supports WEP (64/128 bit), WPA and WPA2 data encryption

Supports Software AP function (turns your wireless client into a wireless access point)

Supports the most popular operating systems: Windows XP, Vista and Windows 7

Complies with 2.4 GHz IEEE 802.11n standard and is backward compatible with IEEE

802.11g/b standards

Use with INTELLINET NETWORK SOLUTIONS Wireless N WLAN products for best

compatibility and performance

Supports Hi-Speed USB 2.0/1.1 interface

Three-Year Warranty

1.2 Specifications

Standards:

• IEEE 802.11b (11 Mbps Wireless LAN)

• IEEE 802.11g (54 Mbps Wireless LAN)

• IEEE 802.11n (300 Mbps Wireless LAN)

• IEEE 802.11e (Wireless Multimedia Extensions [WME])

General

• Interface: Hi-Speed USB 2.0

• Chipset: Realtek RTL8192

• Frequency band: 2.4000 –2.4835 GHz (Industrial Scientific Medical Band)

• Modulation technologies:

-802.11b: Direct Sequence Spread Spectrum (DSSS): DBPSK, DQPSK, CCK

-802.11g: Orthogonal Frequency Division Multiplexing (OFDM): BPSK, QPSK, 16QAM,

64QAM

-802.11n: Orthogonal Frequency Division Multiplexing (OFDM): BPSK, QPSK, 16QAM,

64QAM

• Security:

-64/128-bit WEP data encryption

-WPA and WPA2

-Cisco CCX

• Transmit power:

-300 Mbps 20 MHz, 13 dBm +/-1.5 dBm

-300 Mbps 40 MHz, 13 dBm +/-1.5 dBm

-54 Mbps OFDM, 14 dBm +/-1.5 dBm

-11 Mbps CCK, 16 dBm +/-1.5 dBm

• Receive sensitivity:

-300 Mbps 20 MHz, -70 dBm

-300 Mbps 40 MHz, -67 dBm

-54 Mbps OFDM, -74 dBm

-11 Mbps CCK, -87 dBm

• Antennas: 2 antennas with 3 dBi gain

• Certification: FCC Class B, CE

LEDs

• Link/Activity

Environmental

• Dimensions: 15 (H) x 15 (W) x 155 (L) mm (0.4 x 1.1 x 3.5 in.)

• Weight: 0.14 kg (0.3 lbs.)

• Operating temperature: 0 –40°C (32 –104°F)

• Operating humidity: max. 95% RH, non-condensing

System Requirements

• Notebook or Desktop PC with Pentium 1 GHz-compatible processor or higher

• Windows XP, Vista or 7

• Available Hi-Speed USB 2.0 type-A port

Package Contents

• Wireless 300N USB Adapter

• Quick install guide

• Setup CD with user manual

2 Installation Procedure

Before you proceed with the installation, notice following descriptions.

Note1: The following installation was operated under Windows XP. (Procedures are similar for

Windows Vista/7.)

Note2: If you have installed the Wireless PC Adapter driver and utility before, uninstall the old

version first.

I. Install the Driver and Utility

A. Insert the installation CD in your CD-ROM drive. Execute the “Setup.exe” program.

B. Select a setup language and click “Next” to proceed.

C. Click “Next” to go to the next step.

D. When you see the following screen, click “Install”to begin the installation.

E. The system starts to install the driver and utility.

F. Click “Finish” to complete the driver and utility installation.

II. Connect to a Wireless Access Point

A. To start configuring the adapter, double-click the icon in the system tray or right-click the icon and

select “Open configuration utility.”

B. The utility of the adapter is displayed. Click the “Available Network” tab and double-click on the

wireless access point you want to connect to.

C. Input the security setting and click “OK” to start the network connection.

* Use Windows Zero Configuration on Windows Vista/7:

A. With Windows Vista / 7, you can use Windows Zero Configuration to connect to a wireless access

point.

Click “Start,” then click “Control Panel.”Click “Network and Internet”in the Control Panel.

B. Click “Connect to a network”under “Network and Sharing Center.”

Table des matières

Autres manuels Intellinet Adaptateur

Intellinet

Intellinet 521499 Manuel utilisateur

Intellinet

Intellinet 791120 Manuel utilisateur

Intellinet

Intellinet 530361 Manuel utilisateur

Intellinet

Intellinet 525275 Manuel utilisateur

Intellinet

Intellinet 501262 Manuel utilisateur

Intellinet

Intellinet 503273 Manuel utilisateur

Intellinet

Intellinet 500913 Manuel utilisateur

Intellinet

Intellinet 561495 Manuel utilisateur

Intellinet

Intellinet 524766 Manuel utilisateur

Intellinet

Intellinet 505932 Manuel utilisateur

Intellinet

Intellinet 503273 Manuel utilisateur

Intellinet

Intellinet 524179 Manuel utilisateur

Intellinet

Intellinet 524438 Manuel d'installation et d'exploitation

Intellinet

Intellinet 505932 Manuel utilisateur

Intellinet

Intellinet iStream HD Manuel utilisateur

Intellinet

Intellinet 525336 Manuel utilisateur

Intellinet

Intellinet 524766 Manuel utilisateur

Intellinet

Intellinet 524698 Manuel utilisateur

Intellinet

Intellinet 524438 Manuel utilisateur

Intellinet

Intellinet PowerLine Turbo Ethernet Adapter Manuel utilisateur

Intellinet

Intellinet 524438 Manuel utilisateur

Intellinet

Intellinet 503273 Manuel utilisateur

Intellinet

Intellinet 522731 Manuel utilisateur

Intellinet

Intellinet 524995 Manuel utilisateur

Manuels Adaptateur populaires d'autres marques

PCB Piezotronics

PCB Piezotronics 090B274 Manuel utilisateur

Auvidea

Auvidea J20 Manuel du produit

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuel utilisateur

Akribis

Akribis ITF-21-BISS-MIT Manuel utilisateur

Tenda

Tenda W54U Manuel utilisateur

ROHO

ROHO AGILITY Manuel utilisateur

PROLiNK

PROLiNK WN2001 Manuel utilisateur

Hawking

Hawking HUF2 Manuel utilisateur

Airlink101

Airlink101 AWLC4030 Manuel utilisateur

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuel utilisateur

Philips

Philips SWA4554S/10 Manuel utilisateur

JVC

JVC TS-C9D2B Manuel d'instructions

NETGEAR

NETGEAR A6100 Manuel utilisateur

D-Link

D-Link DWA-121 Manuel utilisateur

Philips

Philips SWA2037 Manuel utilisateur

Basalte

Basalte 0610-20 Manuel utilisateur

Yealink

Yealink EHS40 Manuel utilisateur

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuel utilisateur