Intel VX PENTIUM PCI Manuel utilisateur
INTEL VX PENTIUM PCI
MAINBOARD
USER’S MANUAL
Version #7502/004/1196
P/N #73-75021040-000
Trademark Acknowledgments
Trademark Acknowledgments:
•IBM PC, PC/XT and PC/AT all are registered trademarks of International
Business Machines Corporation.
•Pentium is a trademark of Intel Corporation.
•AMD is a registered trademark of Advanced Micro Devices Inc.
•AWARD is a registered trademark of Award Software Inc.
•PCI is registered trademark of PCI Special Interest Group.
•MS-DOS and WINDOWS NT are registered trademarks of Microsoft
Corporation.
The manufacturer reserves the right to modify any product’s specifications in order
to meet advances in hardware and software technology.
Table of Content
Table of Content
1. INTRODUCTION.............................................................................................................1
1.1 OVERVIEW................................................................................................................1
1.2 GREEN PC POWER MANAGEMENT.......................................................................3
1.3 CHECKLIST ...............................................................................................................5
1.4 PT-7502-2 SYSTEM BOARD SPECIFICATIONS......................................................6
1.5 STATIC ELECTRICITY PRECAUTION....................................................................8
2. HARDWARE CONFIGURATION..................................................................................10
MAINBOARD COMPONENT LOCATIONS.....................................................................10
2.1 JUMPERS & CONNECTORS...................................................................................13
2.2 EXTERNAL CACHE CONFIGURATION................................................................26
2.3 MEMORY INSTALLATION ....................................................................................27
3 AWARD BIOS SETUP ...................................................................................................33
3.1 STANDARD CMOS SETUP.....................................................................................36
3.2 BIOS FEATURES SETUP .......................................................................................41
3.3 CHIPSET FEATURES SETUP ................................................................................51
3.4 POWER MANAGEMENT SETUP...........................................................................55
3.5 PNP/PCI SLOT CONFIGURATION........................................................................60
3.6 LOAD SETUP DEFAULTS .....................................................................................63
3.7 INTEGRATED PERIPHERALS SETUP..................................................................65
3.8 USER PASSWORD SETTING.................................................................................65
3.9 IDE HDD AUTO DETECTION ...............................................................................65
3.10 SAVE & EXIT SETUP...........................................................................................25
3.11 EXIT WITHOUT SAVING....................................................................................25
Statements
"This is an ENERGY STARTM compliant product."
The Environmental Protection Agency ENERGY STARTM program defines that as an Ally
of this program the specified manufacturer must produce systems, or system components
which enable a computer system to operate and draw 30 watts or less of power in idle mode.
Although the EPA do not endorse any particular product or service, the program is designed
to offer a cooperative effort between the EPA and the component manufacturer (Ally) to
provide energy saving products and education to customers."
"FCC Approval"
The PT-7502-2 motherboard has been approved for FCC Class B when properly installed in a
barebone configuration using the following case/power supply:
Brand Model FCC ID
Procase PC-109 SM JPJPINE429G1
09
Procase PC-609 T/M JPJPINE429G6
09
Procase PC-709 T/M JPJPINE429G7
09
FCC Notice:
Information to the User
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. Should you
experience interference to radio or television reception then the user is encouraged to try to
correct this interference by one or more of the following measures:
Re-locate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help and for additional
suggestions.
The user may find the following booklet prepared by the Federal Communications
Commission helpful:
“How to identify and Resolve Radio-TV Interference Problems.” This booklet is available
from the U.S. Government Printing Office, Washington, DC20402, Stock No. 004-000-
00345-4.
FCC Warning
The user is cautioned that changes or modifications not expressly approved by the
manufacturer could void the user’s authority to operate this equipment.
Note : In order for the installation of this product to maintain compliance with the limits for
a Class B device, shielded
Page
1
Introduction
1. Introduction
1.1 Overview
•The PT-7502-2 motherboard offers 64-bit programming architecture compatible with the
software base of 486 and 586 microprocessors. It is a reliable motherboard, using a Intel
i430VX chipset and a multi-layer printed circuit board. The chipset consists of a TVX
(Host Bridge & Cache Memory Controller), two TDX (Write Buffer Data Path
Controller), and 82371SB, PIIX3 (ISA Bridge & System I/O Controller).
•The PT-7502-2 is a PCI Local Bus motherboard. The four Master Mode PCI Local Bus
slots fully comply with the PCI (Peripheral Component Interconnect) Local Bus
Specification Rev. 2.1. The speed of I/O peripherals can be dramatically increased by
connecting PCI compatible interface cards to the PCI Local Bus slots on the PT-7502-2.
PINE is a member of PCI SIG (Special Interest Group).
•The PT-7502-2 is a ‘green’ design motherboard which means if there is no system activity
for a specific period of time (this period is software programmable), the PT-7502-2 will
slow down its original working frequency to zero. This will help to save power
consumption, reduce energy related pollution and protect our environment.
•The PT-7502-2 has the full complement of I/O on-board: FDC, PCI local bus Enhanced
IDE, printer port, COM ports, and dual USB port as well.
1.2 Green PC Power Management
The Green PC mode is a state that minimizes power consumption. There are two different
levels of Green PC modes :
•Standby mode. The spin motor of the HDD can be turned off.
•Inactive mode / Sleep Mode. The PT-7502-2 can stop the CPU clock under this mode.
The PT-7502-2 will be placed into Green PC mode as a result of one of the following events :
When the SMI header is connected to a momentary switch, pressing the switch will put
PT-7502-2 into Green mode.
Expiration of the internal Green PC Timer. The Green PC Timer is software programmable
which can configure in the "Power Management Setup" option of the BIOS CMOS setup. The
power management feature will be enabled as default; however, the timing may differ due to
production control. It is recommended that you re-adjust these timings according to your
personal requirements/set-up.
Through system activity monitoring and management, the PT-7502-2 will not go into Green
PC mode if any of the following activity is detected:
•PCI Master 0 activity •COM port activity
•PCI Master 1 activity •ISA master & DMA activity
•PCI Master 2 activity •IDE activity
•LPT port activity •Floppy activity
•COM port activity •Keyboard activity
Page
2
Introduction
1.3 Checklist
Please check your PT-7502-2 package to ensure that it contains the following items :
•PT-7502-2 Main Board
•PT-7502-2 User Manual
•Jumper Setting List
•Cable Pack included
1 x 40 way flat cables
1 x FDC flat cable
1 x DB9 flat cable and one DB25 flat cable with a bracket (COM 1 & COM 2)
1 x DB25 flat cable with a bracket (Printer port)
•Cache Module (either 512KB , 256KB or not bundle)
If any of these items are missing or damaged, please contact your local dealer or sales
representative for assistance.
1.4 PT-7502-2 System Board Specifications
•Intel i430VX PCIsetTM chipset
•Support either 75/90/100/120/133/166/180/200 MHz PENTIUMTM CPUs with 321 pin
ZIF socket
•Support Pentium P55C
•Support Dual Voltage Regulator Module
•Support Cyrix 6x86, AMD K5 CPUs
•Uses 72-pin SIMM modules x 4 auto banking in multiple configuration up to 128MB
•Support Both Fast Page Mode and Extended DATA Output (EDO) DRAM module
•Support SDRAM/EDO DRAM/Page Mode DRAM use 168-pin DIMMx2
•Support cache module socket, cache module options 256KB or 512KB pipeline burst
SRAM module
•4 PCI Local Bus slots, and 3 x 16 bits ISA Bus slots
•All 4 PCI slots support Master mode
•System BIOS support 4 IDE harddisk drivers that don't need device driver for S/W
application, the capacity each harddisk can large than 528MB up to 8.4GB
•PCI Bus master IDE interface on board with two connectors support 4 IDE devices in 2
channel, the PCI IDE Controller supports PIO mode 0 to Mode 4 at maximum transfer
rate of 16.67 MB/s and Bus master IDE DMA Mode 2.
•On board super Multi-I/O chip that support 2 serial port with 16550 Fast UART
compatible, 1 parallel port with SPP, EPP and ECP capabilities, and a floppy disk drive
interface.
•Support PS/2TM connector.
•Support the Universal Serial Bus (U.S.B.) (option)
•System BIOS supports NCR810 SCSI BIOS firmware and Green feature function, Plug
and Play Flash ROM
Page
3
Introduction
1.5 Static Electricity Precaution
Static electricity can easily damage your PT-7502-2 mainboard.
Observing a few basic precautions can help you safeguard against damage that could result in
expensive repairs. Follow the measures below to protect your equipment from static
discharge:
-Keep the mainboard and other system components in their anti-static packaging until
you are ready to install them.
-Touch a grounded surface before you remove any system component from its
protective anti-static packaging. A grounded surface within easy reach is the
expansion slot covers at the rear of the system case or any other unpainted portion of
the system chassis.
-During configuration and installation, touch a grounded surface frequently to discharge
any static electric charge that may build up in your body. Another option is to wear a
grounding wrist strap.
-When handling a mainboard or an adapter card, avoid touching its components.
Handle the mainboard and adapter cards either by the edges or by the mounting
bracket that attaches to the slot opening in the case.
Page
4
Hardware Configuration
2. Hardware Configuration
Mainboard Component Locations
Page
5
Hardware Configuration
2.1 Jumpers & Connectors
Jumpers/Connector Description
J2 Keyboard Connector
J3 Power Supply Connector
J6 Power-LED Keylock & Connector
J6 Speaker Connector
J7 HDD LED Connector
J7 Reset Switch
J7 External Battery Selector
J8 PS/2 Mouse Connector
JP1 Clear CMOS
JP4 AT Bus Clock Selector
JP5 FlashRom Voltage Selector
JP7A, JP7B DIMM Socket Voltage Select
JP8A, JP8B CPU Speed Selectors
JP9A, JP9B CPU Internal Clock Speed Selectors
JP10 P54C/P55C CPU Voltage Selectors
J2 Keyboard Connectors
A standard five-pin female DIN keyboard connector is located at the rear of the board J2.
Pin Description
1Keyboard Clock
2Keyboard Data
3N.C.
4Ground
5+5VDC
J2 USB Universal Serial Bus Connector
Pin Description Pin Description
1+5 VDC 7+5 VDC
2DATA - 8DATA -
3DATA + 9DATA +
4Ground 10 Ground
5N.C. 11 N.C.
COM 1 : Serial port #1
COM 2 :Serial port #2
PRN 1 :Parallel port
Page
6
Hardware Configuration
J3 Power Supply Connectors
The power supply connectors are two six-pin male header connectors. Plug the dual
connectors from the power directly onto the board connectors.
Most of the power supply have two leads. Each lead has six wires. Two of which are black,
orient the connectors, so the black wires are in the middle.
The black wires should be in the middle
P1 P12
Pin Description Pin Description
1Power Good 7Ground
2+ 5V DC 8Ground
3+12V DC 9- 5V DC
4- 12V DC 10 +5V DC
5Ground 11 +5V DC
6Ground 12 +5V DC
J6 Power-LED Keylock & Power-LED Connector
J6 is a keylock connector that enables and disables the keyboard and the Power-LED on the
case.
Pin Description
1LED Output
2NC
3Ground
4Keylock
J6 SPK Speaker Connectors
Attach the system speaker to connector J6.
Pin Description
1DATA Out
2NC
3Ground
4+ 5V
J7 HDD LED Connector
Pin Description
15V
2Active Low
Table des matières
Autres manuels Intel Carte mère
Intel
Intel S5000PSLROMB Instructions d'installation
Intel
Intel BOXDP55WG Manuel utilisateur
Intel
Intel BLKD945PSNLK Guide de configuration
Intel
Intel DZ75ML-45K Manuel utilisateur
Intel
Intel DQ965CO Manuel utilisateur
Intel
Intel Desktop Board D850EMD2 Manuel utilisateur
Intel
Intel D915PLWD Manuel utilisateur
Intel
Intel BOXDG35EC - Core2 Quad/LGA 775/ G35/FSB Manuel utilisateur
Intel
Intel S2600KPFR Instructions d'installation
Intel
Intel DP965LT Manuel utilisateur
Intel
Intel LGA775 Manuel utilisateur
Intel
Intel DX58OG Manuel utilisateur
Intel
Intel DZ68AF Manuel utilisateur
Intel
Intel BOXD845GVFNL Manuel utilisateur
Intel
Intel BLKDQ35MP Guide de configuration
Intel
Intel DG965SS Manuel utilisateur
Intel
Intel D510MO Manuel technique
Intel
Intel DQ965WC Manuel utilisateur
Intel
Intel DBS1200KP Manuel utilisateur
Intel
Intel D845GBV Manuel utilisateur
Manuels Carte mère populaires d'autres marques
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuel utilisateur
Gigabyte
Gigabyte GA-9IVDT Manuel utilisateur
Texas Instruments
Texas Instruments ADS8372EVM Manuel utilisateur
Commell
Commell MS-C73 Manuel utilisateur
IBT Technologies
IBT Technologies MB860 Manuel utilisateur
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur
