Intel ETHEREXPRESS PRO/100 Manuel technique

Quick Start Card

EtherExpress

™

PRO/100 Mobile PC Card

Use these instructions to install the PRO/100 PC Card under Windows 95*

Windows 98*, Windows for Workgroups, or Windows NT*. For MS-DOS

without Windows , see Chapter 2, Software Installation in the

User’s Guide

1. Windows 95 / 98

Start your computer first and let

Windows 95 /98 run. With the

Intel logo on top and the arrow on

the label facing into your

computer, insert the card in a PC

Card (PCMCIA) slot. Push until

the card is firmly seated. Go to

step 2.

1. Windows 3.x

Do not start your computer. With

the Intel logo on top and the arrow

on the label facing into your

computer, insert the card in a PC

Card (PCMCIA) slot. Push until

the card is firmly seated.

2. Attach adapter cable to card

As shown, attach the adapter cable to the card and push in lightly. Note position

of Intel logo.

3. Connect network cable to adapter

As shown, attach the network cable RJ-45 connector to the PRO/100 PC Card

RJ-45 cable receptacle.

668560-003

16 bit

PC Card

Intel EtherExpress

™

PRO/100 Mobile Adapter

ATTACH THE ADAPTER

CABLE TO THE CARD

CONNECT THE NETWORK

CABLE TO THE ADAPTER

CABLE

➥

➊➋

➌

4. Install the drivers for your operating system

Windows 95/98: See section below.

Windows 3.x and Windows for Workgroups: See section below.

Windows NT 4.0: Choose Control Panel, Network, Adapters, Add, and Have

Disk. Insert the Intel Network Drivers Disk and click OK. Click Close to

finalize the installation. Restart the computer when prompted.

Windows 95/98 Driver

• If Windows 95/98 detects the PRO/100 PC Card, proceed to the next bullet

point. If Windows 98 does not detect the PC Card, see the README.TXT

file for instructions on manually adding a PC Card. If Windows 95 does not

detect the PC Card, first click on the PC Card (PCMCIA) icon in the Control

Panel to enable PC Card services, then go to the next bullet point.

• If prompted for a manufacturer’s disk, insert the Network Drivers Disk and

follow the instructions on screen. Restart the computer when prompted.

Windows 3.x and Windows for Workgroups:

Run the Intel Installation program to install drivers

• Start computer and Windows OS.

• Insert Disk 1, Installation Disk, into your diskette drive.

• From the Program Manager, choose File/Run. In the Command Line box,

type A:SETUP. Press Enter or click OK.

• Highlight your network operating system and click OK.

• Complete the steps prompted by the Installation Program, then proceed to

Chapter 2, Software Installation in the User's Guide. Find your

network operating system in the alphabetical listing under Installing

Network Software in Chapter 2. Follow the procedures shown to

complete the installation. If prompted for a manufacturer’s disk, insert

disk 2, Network Drivers Disk.

responsibility for errors or omissions in this document. Nor does Intel make any commit-

ment to update the information contained herein.* Other product and corporate names

may be trademarks of other companies and are used only for explanation and to the

owners’benefit, without intent to infringe.

Autres manuels pour ETHEREXPRESS PRO/100

Table des matières

Autres manuels Intel Matériel informatique

Intel

Intel DUAL-CORE - UPDATE REV 010 Manuel utilisateur

Intel

Intel H110 Express Manuel utilisateur

Intel

Intel PENTIUM P6000 SPECIFICATION 20 Manuel utilisateur

Intel

Intel EP80579 Manuel utilisateur

Intel

Intel DC3217BY Manuel utilisateur

Intel

Intel HH80552PG0962M - Pentium 4 3.4 GHz Processor Manuel utilisateur

Intel

Intel SRCSAS18E - RAID Controller Manuel utilisateur

Intel

Intel BX80623I32100 Manuel utilisateur

Intel

Intel PCI-6886 Manuel utilisateur

Intel

Intel CORE 2 DUO MOBILE - THERMAL DESIGN GUIDE... Mode d’emploi

Intel

Intel Compute Module MFS2600KI Manuel utilisateur

Intel

Intel DG45ID - CARACTERISTIQUES TECHNIQUES Guide de configuration

Intel

Intel PXA27x Series Manuel utilisateur

Intel

Intel 386 Manuel utilisateur

Intel

Intel Xeon 5500 Series Manuel technique

Intel

Intel E2160 - Cpu Pentium Dual-Core 1.80Ghz Fsb800Mhz 1M Lga775... Mode d’emploi

Intel

Intel ETHEREXPRESS PRO/100 Manuel utilisateur

Intel

Intel ICH10R Manuel utilisateur

Intel

Intel RS25NB008 Manuel utilisateur

Intel

Intel 80C186EA Manuel du propriétaire

Intel

Intel Mobileye Shield+ v2.0 Manuel utilisateur

Intel

Intel XL710-Q2 Manuel utilisateur

Intel

Intel SRCSASRB - RAID Controller Manuel d'installation

Intel

Intel D975XBX Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur

Advantech

Advantech ASMB-935 Series Manuel utilisateur

Jupiter

Jupiter RAM PACK Manuel utilisateur