Intel D875PBZ - Desktop Board Motherboard Manuel utilisateur

C24495-003

Intel®Desktop Board D875PBZ

Quick Reference

This guide is written for technically qualified personnel with experience

installing and configuring desktop boards.

Before You Begin ................................................................................ 3

Desktop Board Components........................................................ 4

Supported Components

Processors ............................................................................................ 6

Memory Module Requirements........................................................... 6

Installation Steps

1. Installing the I/O Shield ............................................................. 8

2. Installing the Desktop Board...................................................... 8

3. Installing the Processor .............................................................. 9

4. Installing Memory Modules....................................................... 9

5. Installing an AGP Card ............................................................ 10

6. Attaching IDE Drives............................................................... 12

7. Attaching Serial ATA (SATA) Drives .................................... 13

8. Configuring the System for Intel®RAID Technology

for Serial ATA.......................................................................... 14

9. Connecting Internal Headers.................................................... 17

10. Connecting Hardware Control ................................................. 18

11. Connecting Power Cables ........................................................ 18

Using the BIOS Setup Program ................................................ 19

Setting the BIOS Configuration Jumper Block................ 19

Troubleshooting................................................................................. 20

Customer Support Links............................................................... 21

Items on the Intel®Express Installer CD-ROM

• Product warranty

• Intel Express Installer

• Intel®Desktop Board D875PBZ Product Guide

• Software utilities and drivers

• Software license agreement

• Readme file

Part Number: C24495-003

2 Intel Desktop Board D875PBZ Quick Reference

INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH

INTEL®PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR

OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY

THIS DOCUMENT. EXCEPT AS PROVIDED IN INTEL’S TERMS AND

CONDITIONS OF SALE FOR SUCH PRODUCTS, INTEL ASSUMES NO

LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR

IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF INTEL

PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS

FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF

ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.

INTEL PRODUCTS ARE NOT INTENDED FOR USE IN MEDICAL, LIFE

SAVING, OR LIFE SUSTAINING APPLICATIONS. INTEL MAY MAKE

CHANGES TO SPECIFICATIONS AND PRODUCT DESCRIPTIONS AT ANY

TIME, WITHOUT NOTICE.

Intel®Desktop Board D875PBZ may contain design defects or errors known as

errata which may cause the product to deviate from published specifications.

Current characterized errata are available on request.

Contact your local Intel sales office or your distributor to obtain the latest

specifications and before placing your product order.

Copies of documents which have an ordering number and are referenced in this

document, or other Intel literature, may be obtained from Intel Corporation by

going to the World Wide Web site at: http://www.intel.com or by calling

1-800-548-4725.

Intel and Pentium are registered trademarks of Intel Corporation or its subsidiaries

in the United States and other countries.

*Other names and brands may be claimed as the property of others.

Intel Desktop Board D875PBZ Quick Reference 3

Before You Begin

Warning and Cautions

WARNING

Disconnect the desktop board's power supply from its AC power

source before you connect or disconnect cables, or install or remove

any board components. Failure to do this can result in personal

injury or equipment damage. Some circuitry on the desktop board

can continue to operate even though the front panel power switch is

off.

CAUTION

Electrostatic discharge (ESD) can damage desktop board components.

Install the board at an ESD-controlled workstation. If such a workstation is

not available, wear an antistatic wrist strap or touch the surface of the

antistatic package before handling the board.

CAUTION

Many of the midboard and front panel connectors provide operating

voltage (+5 V DC and +12 V DC, for example) to devices inside the

computer chassis, such as fans and internal peripherals. These

connectors are not overcurrent protected. Do not use these connectors for

powering devices external to the computer chassis. A fault in the load

presented by the external devices could cause damage to the computer,

the interconnecting cables, and the external devices themselves.

Safety and Regulatory Notice

See the Intel®Desktop Board D875PBZ Product Guide for all applicable

regulatory compliance statements, product certification markings, and safety and

electromagnetic compatibility (EMC) standards and regulations the desktop

board is compliant with.

Replacement battery warning label provided: Place the label inside the chassis

in an easy-to-see location near the battery but not on the board itself.

Intended uses: This product was evaluated as information technology

equipment (ITE) for home or office use when installed into an appropriate

computer chassis. Other end uses or locations may require further evaluation.

4 Intel Desktop Board D875PBZ Quick Reference

Desktop Board Components

OM15666

USB 2.0

Devices RJ45

USB 2.0

Devices

On/Off

Reset

HD LED

Power LED

No Connection

Power LED

Figure 1. Desktop Board Components

continued

Intel Desktop Board D875PBZ Quick Reference 5

Desktop Board Components (continued)

Label Description

A AGP connector

B Rear chassis fan header (fan speed control)

C 12 V processor core voltage connector

D VREG fan header

E Processor socket

F Processor fan header

G Intel®82875P (MCH)

H Channel A DIMM sockets

I Channel B DIMM sockets

J Main power connector

K Diskette drive connector

L Primary IDE connector

M Secondary IDE connector

N SCSI hard drive activity LED header

O Front chassis fan header (fan speed control)

P Serial ATA connectors

Q BIOS configuration jumper

R Speaker

S USB 2.0 header

T Chassis intrusion header

U Battery

V Intel®82801ER (ICH5)

W PCI bus add-in card connectors

6 Intel Desktop Board D875PBZ Quick Reference

Supported Components

Processors

The board supports a single processor with the following features:

Type

Designation

FSB1

Frequency

L2 Cache

3.0, 2.80C, 2.60C, and

2.40C GHz

800 MHz 512 KBIntel®Pentium®4

processor supporting

Hyper-Threading

Technology 3.06 GHz 533 MHz 512 KB

Intel Pentium 4 processor 2.8, 2.66, 2.53, 2.4B,

and 2.26 GHz

533 MHz 512 KB

1Front side bus

For the latest information on processors supported by Desktop Board D875PBZ,

refer to the Intel World Wide Web site at:

http://support.intel.com/support/motherboards/desktop

Memory Module Requirements

The desktop board supports system memory as defined below:

Memory

Speed

Processor

Front Side Bus

Frequency

Memory Speed

Outcome

DDR400 Intel Pentium 4 processor 800 MHz 400 MHz

Intel Pentium 4 processor 800 MHz 320 MHzDDR333

Intel Pentium 4 processor 533 MHz 333 MHz

• Up to four 184-pin Double Data Rate (DDR) SDRAM Dual Inline Memory

Module (DIMM) connectors with gold-plated contacts.

• Support for:

 Unbuffered, non-registered single or double-sided DIMMs

 Serial Presence Detect (SPD) memory only

 Support for Suspend to RAM (STR), S3 ACPI state

 ECC or non-ECC RAM memory

 2.5 V memory

NOTE

ECC memory support must be enabled in BIOS.

Intel Desktop Board D875PBZ Quick Reference 7

NOTES

System resources (such as PCI and AGP) require physical memory

address locations that reduce available memory addresses above 3 GB.

This may result in less than 4 GB of memory being available to the

operating system and applications.

All memory components and DIMMs used with the desktop board must

comply with the PC SDRAM specifications. These include the PC SDRAM

Specification (memory component specific), the PC Unbuffered DIMM

Specification. To view or download these specifications, refer to this Intel

World Wide Web site at:

http://developer.intel.com/technology/memory/pcsdram/spec/

For information about vendors that support these memory requirements,

refer to the Desktop Board D875PBZ link on this Intel World Wide Web

site at:

http://support.intel.com/support/motherboards/desktop/

8 Intel Desktop Board D875PBZ Quick Reference

Installation Steps

1. Installing the I/O Shield

The board comes with an I/O shield that is used to block radio frequency

transmissions, necessary to pass emissions (EMI) certification testing, protect

internal components from dust and foreign objects, and promote correct airflow

within the chassis.

Install the I/O shield before installing the board in the chassis. Place the shield

inside the chassis as shown in Figure 2. Press the shield into place so that it fits

tightly and securely. If the shield doesn’t fit, obtain a properly sized shield from

the chassis supplier.

OM15474

Figure 2. I/O Shield

2. Installing the Desktop Board

Refer to your chassis manual for specific instructions on installing and removing

the desktop board.

Secure Desktop Board D875PBZ to the chassis using the 10 screws. Refer to

Figure 1 on page 4 for the location of the screw mounting holes.

Intel Desktop Board D875PBZ Quick Reference 9

3. Installing the Processor

To install the processor, follow these steps (see Figure 3):

1. Observe the precautions in “Before You Begin” on page 3.

2. Lift the processor socket lever.

3. Install the processor so that the corner with the triangle marking (A) is

aligned with the corner where the lever is attached to the socket.

4. Lower the lever back to its original position.

OM12078

mPGA478B

Figure 3. Installing a Processor

5. The desktop board has an integrated processor fan heat sink retention

mechanism (RM). For instructions on how to install the processor fan heat

sink, refer to the boxed processor manual or the Intel World Wide Web

site at:

http://support.intel.com/support/processors/pentium4/intnotes478.htm

4. Installing Memory Modules

CAUTION

Install memory in the DIMM sockets prior to installing the AGP video card

to avoid interference with the memory retention mechanism.

Desktop Board D875PBZ’s four DIMM sockets are arranged as DIMM 0 and

DIMM 1 in both Channel A and Channel B, as shown in Figure 4.

Dual Channel Configuration

Install a matched pair of DIMMs (equal in speed: DDR266, DDR333, or

DDR400; density: 64 MB, 128 MB, 256 MB, 512 MB, or 1 GB; and

technology: 128 Mb, 256 Mb, or 512 Mb) in DIMM 0 in both Channels A and

B. If additional memory is to be used, then install another matched pair of

DIMMs in DIMM 1 in both Channels A and B.

NOTE

All other memory configurations will result in single channel memory

operation.

10 Intel Desktop Board D875PBZ Quick Reference

To install DIMMs, follow these steps (see Figure 4):

1. Observe the precautions in “Before You Begin” on page 3.

2. Remove the AGP video card if it interferes with the DIMM clips from

being easily opened and closed.

3. Align the small notch at the bottom edge of the DIMM with the key in the

socket.

4. Insert the bottom edge of the DIMM into the socket.

5. Push down on the top edge of the DIMM until the retaining clips snap into

place. Make sure the clips are firmly in place.

OM15667

DIMM 1

DIMM 0

Channel B

Channel A

DIMM 0

DIMM 1

Figure 4. Installing DIMMs

5. Installing an AGP Card

CAUTION

Care must be taken when installing an AGP card into an AGP connector.

When installing any AGP card in the desktop board, ensure that it is fully

seated in the AGP connector before you power on the system. If the card

is not fully seated in the AGP connector, an electrical short may result

across the AGP connector pins. Depending on the over-current protection

of the power supply, certain board components and/or traces may be

damaged.

NOTE

Desktop Board D875PBZ is only compatible with 1.5 V or 0.8 V AGP

cards. Do not attempt to install a legacy 3.3 V AGP card. The AGP

connector is not mechanically compatible with legacy 3.3 V AGP cards.

Autres manuels pour D875PBZ - Desktop Board Motherboard

Table des matières

Autres manuels Intel Matériel informatique

Intel

Intel 5000 Series Manuel utilisateur

Intel

Intel SASUC8I - RAID Controller Manuel d'installation

Intel

Intel SRCZCR - RAID Controller Storage Manuel utilisateur

Intel

Intel NUC Kit NUC1ATKPE Manuel utilisateur

Intel

Intel 386 Manuel utilisateur

Intel

Intel 845 DESIGN Mode d’emploi

Intel

Intel DUAL-CORE - UPDATE REV 010 Manuel utilisateur

Intel

Intel Core i7-980X Instructions d'utilisation et de sécurité

Intel

Intel BX80637I53570K Manuel utilisateur

Intel

Intel I5-520E - ADDENDUM Manuel utilisateur

Intel

Intel 80960MC Manuel utilisateur

Intel

Intel XL710-Q2 Manuel utilisateur

Intel

Intel RMS25PB080 Manuel d'installation

Intel

Intel 80302 Manuel technique

Intel

Intel Pentium II Instructions d'installation et d'utilisation

Intel

Intel I7-900 DEKSTOP SPECIFICATION Manuel utilisateur

Intel

Intel Pentium III Processor 512K Mode d’emploi

Intel

Intel Xeon LV Manuel utilisateur

Intel

Intel Optane M Series Manuel utilisateur

Intel

Intel SRCSASBB8I - RAID Controller Manuel d'installation

Intel

Intel Water 3.0 Performer C Manuel utilisateur

Intel

Intel CHIPS DKHiQV-AGP Manuel utilisateur

Intel

Intel ATOM PROCESSOR N 500 - UPDATE REVISION 001 Manuel utilisateur

Intel

Intel 500 - DATASHEET REV 003 Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur

Advantech

Advantech ASMB-935 Series Manuel utilisateur

Jupiter

Jupiter RAM PACK Manuel utilisateur