Ingenico iWL258 Manuel utilisateur
We make it easy.
Your iWL258
installation guide.
1. Plugging in the power supply.
2. Connecting your terminal to the base.
3. Connecting your terminal to WiFi automatically.
4. Connecting your terminal to WiFi manually.
Our easy guide will help you get up
and running in no time.
We'll cover:
We’re excited to
have you on board.
iWL258
3
1.
2.
Plugging in the
power supply.
Take the power cable and plug it into the circular
port on your base unit as shown.
Connecting your terminal
to the base.
Take the terminal and place it onto the base unit. It should click into place.
You’ll know it’s connected as the terminal will start to automatically power up.
Once it’s plugged in, you’ll be able to connect the base to WiFi automatically or manually.
•To connect the WiFi automatically, go to page 4.
•To connect the WiFi manually, go to page 6.
Power Supply
iWL258
54
Connecting your terminal
to WiFi automatically.
Once the terminal has powered up, it’ll show the first screen shown below.
Follow the steps to install your terminal.
The terminal will scan and show nearby
networks. Select your network and
press ‘Enter’.
Select ‘Automatic Scan’ and press
‘Enter’.
Terminal Installation
Select WiFi Network
Local Network
and press ENTER
This screen will show first.
Press ‘Enter’ to continue.
1
4EE-BrightBox..
TALKTALK-12PZ34
SKY12PZ34
3Connection Method
1 - Automatic Scan
2 - Manual Connection
Once completed, the terminal screen will display a READY prompt
and show your merchant number.
To make sure the terminal is fully installed, we recommend doing
a test transaction of 1p. You can find out how to do this in your
Ingenico iWL258 Quick-Start Guide.
Connecting your terminal
to WiFi automatically, continued...
It’ll ask for your networks security
type. Select ‘Personal Security’ and
press ‘Enter’.
Type in your merchant number and
press ‘Enter’. You can find it in your
welcome email.
Type in your WiFi password and
press ‘Enter’.
This screen will then show. Press
‘Cancel’ three times to reboot the
terminal.
8
6
7
WiFi Password
Node-adapt-nor
WiFi Password
OK
and then press ENTER
Terminal Installation
Key In Merchant No.
(6 digit number)
and then press ENTER
5Security
1 - Personal Security
2 - Enterprise Security
3.
Select ‘1 – New Profile’ and press
‘Enter’.
2Profiles
1 - New Profile
2 - Active Profile
3 - Modify Profile
If the WiFi network uses enterprise security, please check the
Ingenico iWL258 Quick-Start Guide to see how to do this.
iWL258
This screen will show first. Press
‘Enter’ to continue.
You’ll be asked if the WiFi is hidden on
devices. Select the option that applies,
and press ‘Enter’.
Type in your WiFi password and press
‘Enter’.
Select ‘1 – New Profile’ and press
‘Enter’.
You’ll be asked to provide your WiFi
network name. Type in the network
name and press ‘Enter’.
This screen will then show. Press
‘Cancel’ three times to reboot the
terminal.
Select ‘Manual Connection’ and press
‘Enter’.
It’ll ask for your network’s security type.
Select ‘Personal Security’ and press
‘Enter’.
Type in your merchant number and
press ‘Enter’. You can find it in your
welcome email.
4 5
76
Connecting your terminal
to WiFi manually.
Once the terminal has powered up, it’ll show the first screen shown below.
Follow the steps to install your terminal.
Connecting your terminal
to WiFi manually continued...
ESSID Entry
BRIGHTBOX-PZ1234
2Profiles
1 - New Profile
2 - Active Profile
3 - Modify Profile
Terminal Installation
Select WiFi Network
Local Network
and press ENTER
and then press ENTER and then press ENTER
13Connection Method
1 - Automatic Scan
2 - Manual Connection
and then press ENTER
6Security
1 - Personal Security
2 - Enterprise Security
7 8
WiFi Password?
Node-adapt-nor
New Profile
OK
9
and then press ENTER
Terminal Installation
Key In Merchant No.
(6 digit number)
4.
Once completed, the terminal screen will display a READY prompt and
show your merchant number.
To make sure the terminal is fully installed, we recommend doing a
test transaction of 1p. You can find out how to do this in your Ingenico
iWL258 Quick-Start Guide.
Hidden Access Point
1 - No
2 - Yes
After rebooting, the terminal may go back to the WiFi connection
screen. If this happens, press cancel, and the installation screen
should appear. Please check for the WiFi signal bars.
If the WiFi network uses enterprise security, please check the
Ingenico iWL258 Quick-Start Guide to see how to do this.
We’re here to help
make things easy.
For any installation questions,
give our team a call on:
01606 566 600
Monday-Friday, 9am-5pm
Authorised and regulated by the Financial Conduct Authority. takepayments is a limited company registered in England and Wales under
company number 3102137 and is officially licensed by Mastercard and Visa International as an Independent Sales Organisation and
Member Service Provider, and works in association with a number of Merchant Acquirers, the preferred one being Barclaycard. These
acquirers undertake the processing of card transactions.
In association with
takepayments.com
Autres manuels Ingenico Terminal tactile
Ingenico
Ingenico iWL250 WIFI Manuel utilisateur
Ingenico
Ingenico ICT 220 Manuel utilisateur
Ingenico
Ingenico iwl255 Manuel utilisateur
Ingenico
Ingenico iCT220, iCT250 Guide de référence
Ingenico
Ingenico iWL250 WIFI Manuel utilisateur
Ingenico
Ingenico iSMP4 Manuel utilisateur
Ingenico
Ingenico Link/2500 Mode d’emploi
Ingenico
Ingenico FLEX IPP320 Guide de configuration
Ingenico
Ingenico AXIUM EX4000 Manuel utilisateur
Ingenico
Ingenico Desk 5000 Manuel utilisateur
Ingenico
Ingenico iWL2XX Manuel utilisateur
Ingenico
Ingenico Move 2500 Manuel utilisateur
Ingenico
Ingenico AXIUM RX5000 Manuel utilisateur
Ingenico
Ingenico iCT220, iCT250 Manuel utilisateur
Ingenico
Ingenico Tetra Move/5000 Manuel utilisateur
Ingenico
Ingenico iCMPsi Manuel utilisateur
Ingenico
Ingenico APOS A8 Manuel utilisateur
Ingenico
Ingenico DESK/3500 Manuel utilisateur
Ingenico
Ingenico IWL220 GPRS Manuel utilisateur
Ingenico
Ingenico Desk Series Manuel utilisateur
