InFocus LP720 Instructions d'installation

LP720 RS-232 Command Values

Communication Configuration

To control one of the above noted projectors from an RS-232 control system, connect the serial cable or a null modem cable and

the InFocus RS-232 Adapter (SP-CWRS232) and set the control system serial port settings to match the following communication

configuration*:

RS-232 Port Settings

Setting Value

Bits per second 19,200

Data bits 8

Parity None

Stop bits 1

Flow control None

Emulation VT100

RS-232 Connection for LP720

The RS-232/serial connection for these projectors is located on the PC side of the CableWizard II connection hub. Use the serial

cable (IFS part # 210-0107-xx) to connect the CableWizard II to the serial port of the computer source.

Note: CableWizard3(p/n SP-CW3) does not support RS-232. You must Use CableWizard II (p/n SP-CW2) and the InFocus

serial cable.

Command Format

All commands consist of 3 alpha characters followed by a request, all enclosed in parentheses. The request can be a read request

(indicated by a "?") or a write request (indicated by 1 to 4 ASCII digits).

A read request example:

(AAA?) where

( starts the command

AAA denotes the command

? denotes the read request

) ends the command

A read command returns the range and the current setting, for example:

Read Command Examples

Function Command Response

Brightness (BRT?) (0-22, 10)

Volume (VOL?) (0-80, 0)

Lamp Hours (LMP?) (0-9999, 421)

A write request example:

(AAA####) where

( starts the command

AAA denotes the command

#### denotes the value to be written

(leading zeros not necessary)

) ends the command

Some commands have ranges, while others are absolute. If a number greater than the maximum range is received, it is

automatically set to the maximum number for that function. If a command is received that is not understood, a "?" is returned. With

absolute settings, "0" is off, 1-9999 is on. The one exception is the Power command, where 0 is off and 1 is on.

To assure the projector can process a command, wait 3 seconds before entering the next command.

Write Command Examples

Function Command Response

Brightness (BRT10) Sets the brightness

to 10

Freeze (FRZ1) or

(FRZ8888) Freezes the display

Power (PWR0) Turns power off

Power (PWR1) Turns power on

Error Conditions

Not all commands are supported for all projectors. If an unsupported command is issued, the command will be ignored. If a

command is received that is not understood, a ‘?’ character will be returned indicating the command was not understood.

Limitations

The CLI cannot respond to commands coming in at a high-rate. Therefore, a delay must occur between commands to ensure that

the command gets properly executed. To assure the projector can process a command, wait 3 seconds before entering the next

command.

The following table lists the RS-232 command value ranges for controlling the LP720.

Note: Specified commands and values apply to the LP720 with version 3.04 software or higher. The version number of the

software is the first number listed in the upper right corner of the on-screen menu. Command values for LP720s with earlier

software versions may vary. If your LP720 does not have version 3.04 software or higher, go to the Software/Downloads page to

download and upgrade the projector software.

For absolute command value ranges of 0 - 1, 0 = "Off" and 1-9999 = "On" unless otherwise noted.

Range

Data Source

(Computer) Video Source

Function Command

Min-Max, Initial Value Min-Max, Initial Value

Power (write

only) ("PWR") N/A N/A

Brightness ("BRT") 0-22,11 0-255,129

Tint ("TNT") 0-22,11 0-63,33

Contrast ("CON") 0-22,11 0-127,63

ColorTemp ("TMP") N/A N/A

Saturation ("CLR") N/A 0-63,37

Optimize ("OPT") N/A N/A

VideoFmt ("VSU") N/A 0-4,0

Volume ("VOL") 0-80,40 0-80,40

Balance ("BAL") 0-31,16 0-31,16

Treble ("TRB") 0-14,7 0-14,7

Bass ("BAS") 0-14,7 0-14,7

Fade ("FAD") 0-31,16 0-31,16

Ambiance ("AMB") 0-37,19 0-37,19

Mute ("MTE") 0-1,0 0-1,0

Manual Tracking ("MTS") 0-63,32* N/A

Manual Sync ("MSS") 0-19,10* N/A

Horiz Position ("HPS") 0-63,32* N/A

Vertical Position ("VPS") 0-63,32* N/A

Auto Image ("AIM") 0-1,1 N/A

Resize ("ARZ") 0-1,1 0-1,1

Freeze ("FRZ") 0-1,0 0-1,0

Language ("LAN") 0-3,0 0-3,0

Ceiling ("CEL") 0-1,0 0-1,0

Rear Project ("REA") 0-1,0 0-1,0

Reset ("RST") 0-1,0 0-1,0

Auto Source ("ASC") 0-1,0 0-1,0

Default Source ("DSC") 0-1,0 0-1,0

Blank Screen ("BSC") 0-1,0 0-1,0

Menu Position ("MPS") N/A N/A

Standby Time ("SBT") N/A N/A

Display

Messages ("DMG") N/A N/A

Display Startup

Screen ("DSU") N/A N/A

Standby Mode ("STB") 0-1,0 0-1,0

Source ("SRC") 0-1,0

0 = computer

1 = video

0-1,0

0 = computer

1 = video

Bulb Clock (read

only) ("LMP") 0-9999,0 0-9999,0

*Software dynamically changes range based on the signal received.

Autres manuels pour LP720

Table des matières

Autres manuels InFocus Projecteur

InFocus

InFocus IN126x Manuel utilisateur

InFocus

InFocus IN74 Manuel utilisateur

InFocus

InFocus LP770 Manuel utilisateur

InFocus

InFocus LP280 Manuel utilisateur

InFocus

InFocus IN124STA Manuel utilisateur

InFocus

InFocus Play Big IN1 Manuel utilisateur

InFocus

InFocus IN5122 Manuel utilisateur

InFocus

InFocus in2100 Series Manuel utilisateur

InFocus

InFocus SP777 Manuel utilisateur

InFocus

InFocus Work Big IN42+ Manuel utilisateur

InFocus

InFocus LP425z Manuel de référence

InFocus

InFocus IN5100 series Manuel utilisateur

InFocus

InFocus Work Big IN35 Manuel utilisateur

InFocus

InFocus SP7210 Manuel utilisateur

InFocus

InFocus IN3114 Manuel utilisateur

InFocus

InFocus LP 850 Manuel d'utilisation et d'entretien

InFocus

InFocus LPX9 Manuel utilisateur

InFocus

InFocus LP 840 Guide de configuration rapide

InFocus

InFocus LiteBoard IN3902LB Manuel utilisateur

InFocus

InFocus IN124STA Manuel utilisateur

InFocus

InFocus IN114x Manuel utilisateur

InFocus

InFocus LP800 Manuel d'installation

InFocus

InFocus C410 Manuel utilisateur

InFocus

InFocus SP7200 Instructions d'installation et d'utilisation

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur

Asus

Asus ZenBeam Latte Manuel utilisateur