InFocus IN5132 Manuel utilisateur

Projector

IN5132/IN5142/IN5134/IN5134a/

IN5144/IN5144a/IN5135/IN5145

User's Manual (detailed)

Operating Guide

Thank you for purchasing this projector.

►Before using this product, read all manuals for this product.

Be sure to read Safety Guide rst. After reading them, store them in a safe

place for future reference.

WARNING

• The information in this manual is subject to change without notice.

• The manufacturer assumes no responsibility for any errors that may appear in

this manual.

• The reproduction, transfer or copy of all or any part of this document is not

permitted without express written approval.

NOTE

Trademark acknowledgment

Various symbols are used in this manual. The meanings of these symbols are

described below.

About this manual

WARNING

CAUTION

This symbol indicates information that, if ignored, could possibly

result in personal injury or even death due to incorrect handling.

This symbol indicates information that, if ignored, could possibly

result in personal injury or physical damage due to incorrect handling.

Refer to the pages written following this symbol.



• Mac® is a registered trademark of Apple Inc.

• Windows®, DirectDraw® and Direct3D® are registered trademarks of Microsoft Corporation

in the U.S. and/or other countries.

• VESA and DDC are trademarks of the Video Electronics Standard Association.

•

HDMI

, the HDMI logo, and High-Denition Multimedia Interface are trademarks or registered

trademarks of HDMI Licensing LLC in the United States and other countries.

•

Trademark PJLink is a trademark applied for trademark rights in

Japan, the United States of America and other countries and areas.

• Blu-ray DiscTM and Blu-rayTM are trademarks of Blu-ray Disc Association.

• DICOM® is the registered trademark of the National Electrical Manufacturers Association

for its standards publications relating to digital communications of medical information.

All other trademarks are the properties of their respective owners.

NOTICE This entry indicates the potential for trouble.

009-1419-02

Contents

Introduction ...............3

Features ......................3

Checking package contents

........3

Part names ....................4

Projector, Control panel and Indicators,

Ports, Remote control

Setting up .................7

Arrangement ...................7

Connecting your devices .........10

Fastening the cables

Fastening the adapter cover ......15

Using the security bar and slot ....15

Connecting a power supply .......16

Remote control ............17

Installing the batteries ...........17

Using the REMOTE ID function ...17

Changing the remote control signal frequency

...18

About the remote control signal ...18

Simple PC mouse & keyboard control

....19

Status Monitor ............20

<Only for IN5142, IN5144, IN5144a and

IN5145>

Displaying the projector condition

......20

Displaying the log ..............22

Power on/off ..............24

Turning on the power ...........24

Turning off the power ...........24

Operating ................25

Adjusting the volume ............25

Turning off the source image and audio temporarily

Selecting an input signal .........26

Selecting an aspect ratio .........27

Adjusting the projector's elevator

....28

Adjusting the lens ..............29

Adjusting the zoom and focus,

Adjusting the lens position, lens memory

Using the automatic adjustment feature

. . 31

Adjusting the position ...........31

Correcting the distortion .........32

Using the magnify feature ........35

Temporarily freezing the screen ...36

Temporarily shutting the screen ...36

PbyP ........................37

<Only for IN5134a, IN5144a, IN5135 and

IN5145>

Using the menu function .........39

OSD indicators



Menu Items

EASY MENU. . . . . . . . . . . . . . . 42

PICTURE menu ............44

IMAGE menu ..............47

INPUT menu ..............50

SETUP menu ..............54

AUDIO menu ..............57

SCREEN menu.............59

OPTION menu .............65

NETWORK menu ...........76

SECURITY menu ...........87

Presentation tools .........94

PC-LESS Presentation ..........94

Thumbnail Mode, Full Screen Mode,

Slideshow Mode, Playlist

USB Display .................104

Starting USB Display, Right-Click menu,

oating menu, Options window

Maintenance .............108

Replacing the lamp ............108

Cleaning and replacing the air lter . 110

Other care ................... 112

Troubleshooting ..........113

Warnings displayed on the Status Monitor

. . 113

<Only for IN5142, IN5144, IN5144a and

IN5145>

Related messages ............ 113

Regarding the indicator lamps ... 115

Resetting all settings ........... 117

Situations that may be easily mistaken for

machine defects

............... 118

Specications ............123



Introduction

• Keep the original packing materials for future reshipment. Be sure

to use the original packing materials when moving the projector. Use special

caution with the lens.

• The projector may make a rattling sound when tilted, moved or shaken

because a ap to control the air ow inside of the projector will move. Be aware

that this is not a failure or malfunction.

NOTE

Introduction

The projector provides you with the following features:

Checking package contents

ü The HDMI ports can support a variety of digital image equipment providing

you with clearer pictures.

ü The extremely bright lamp and high quality optical system fullls the demands

of professional applications.

ü Optional lenses and a wide lens shift range provides you with the opportunity

to install the product wherever you want.

ü The lens shutter allows you to hide images you do not want to display to the

audience and helps you to appear more professional.

ü The wealth of I/O ports should support almost any business need.

See the Contents of package section in the User’s Manual (concise). Your

projector should come with the items shown there. If any items are missing,

contact your dealer immediately.

Features

►Keep small parts away from children and pets. Small parts

should not be placed in the mouth. If swallowed, contact a physician immediately

for emergency treatment.

WARNING

Introduction

Part names

Projector

(1) Lamp cover (108)

The lamp unit is inside.

(2) Speakers (x2) (25, 57)

(3) Filter cover (110)

The air lter and intake vent are inside.

(4) Elevator feet (x2) (28)

(5) Elevator buttons (x2) (28)

(6) Remote sensors (x2) (18, 71)

(7) Lens

(8) Lens cover

(9) Indicators (5)

(10) Intake vents

(11) Control panel (5)

(12) Status Monitor (20)

< Only for IN5142, IN5144, IN5144a and

IN5145>

(13) AC IN (AC inlet) (16)

(14) Exhaust vents

(15) Ports (5)

(16) Security bar (15)

(17) Security slot (15)

(18) Grip (below)

(19) Safety bar (15)

►Do not open or remove any portion of the product, unless

directed to do so by the manuals.

►Do not subject the projector to unstable conditions.

►Do not apply shock or pressure to this product. Place

your hands on the grip on the bottom of the projector when

carrying the projector. Remove all the attachments from

the projector, including the power cord and cables, before

carrying the projector.

►Do not look into the lens or the openings on the projector while the lamp is on.

WARNING

►Do not touch around the lamp cover and the exhaust

vents during use or just after use, since it is too hot.

►Do not attach anything onto the lens except the projector's lens cover

because it could damage or melt the lens.

(continued on next page)

CAUTION

Grip

(10)

(3)

(5)

(4)

(9)

(2)

(7) (6)

(4)

(11)

(14)

(10)

(13) (17) (16)

(1)

(19) (18)

(6)

(8)

(15)

(5)

(12)

Control panel and Indicators

(1) STANDBY/ON button (24)

(2) INPUT button (26, 39)

(3) MENU button (39)

(4) LENS SHIFT button (29)

(5) ZOOM button (29)

(6) FOCUS - / + buttons (29)

(7) SHUTTER button (36)

(8) FUNCTION button (22, 29)

(9) FILTER indicator (117)

(10) SHUTTER indicator (36)

(11) SECURITY indicator (93)

(12) LAMP indicator (115, 116)

(13) TEMP indicator (115, 116)

(14) POWER indicator (24, 115, 116)

Ports (10 ~ 14)

(1) COMPUTER IN1 port

(2) COMPUTER IN2 ports

(G/Y, B/Cb/Pb, R/Cr/Pr, H, V)

(3) LAN port

(4) USB TYPE A ports

(5) USB TYPE B port

(6) HDMI 1 port

(7) HDMI 2 port

(8) COMPONENT ports

(Y,Cb/Pb, Cr/Pr)

(9) S-VIDEO port

(10) VIDEO port

(11) AUDIO IN1 port

(12) AUDIO IN2 port

(13) AUDIO IN3 (L, R) ports

(14) AUDIO OUT (L, R) ports

(15) MONITOR OUT port

(16) REMOTE CONTROL IN port

(17) REMOTE CONTROL OUT port

(18) CONTROL port

Introduction

Part names (continued)

(continued on next page)

(5)

(8)

(1)

(3)

(4)

(6)

(2)

(9) (10) (11) (12) (13) (14)

(7)

(1)

(2)

(4)

(3)

(18)

(5) (6) (10) (7)

(9)

(16) (14) (13) (12) (11) (15)(8)(17)

Introduction

Part names (continued)

• Any button marked with “*” is not supported on this projector (114).

•

Any button marked with “○” is only available for IN5134a, IN5144a, IN5135 and IN5145.

• Each time you press a button (except for the ID buttons), the ID button associated

with the current selected ID number will light (17).

NOTE

Back of

the remote control

Remote control

(1) STANDBY button (24)

(2) ON button (24)

(3) ID - 1 / 2 / 3 / 4 buttons (17)

(4) COMPUTER 1 button (26)

(5) COMPUTER 2 button (26)

(6) COMPUTER 3 button *

(7) LAN button (26)

(8) USB TYPE A button (26)

(9) USB TYPE B button (26)

(10) COMPONENT button (26)

(11) S-VIDEO button (26)

(12) VIDEO button (26)

(13) HDMI 1 button (26)

(14) HDMI 2 button (26)

(15) DIGITAL button *

(16)

PAGE UP / PAGE DOWN buttons

(19, 96)

(17) F5 button (18, 19)

(18) ENTER button (19, 22, 39)

(19) RESET button (39)

(20) ESC button (19, 39)

(21) ▲/▼/◄/►cursor buttons

(22) MENU button (39)

(23) VOL + / - buttons (25)

(24) AV MUTE button (25)

(25) MAGNIFY ON / OFF buttons (35)

(26) FREEZE button (36)

(27) PbyP button ○ (37)

(28) ASPECT button (27)

(29) AUTO button (31)

(30) POSITION button (30, 31, 40)

(31) KEYSTONE button (32)

(32) MY BUTTON - 1, 2, 3, 4 buttons (68)

(33) LENS SHIFT button (29)

(34) LENS MEMORY button (30)

(35) FOCUS + / - buttons (29)

(36) ZOOM + / - buttons (29)

(37) Battery cover (17) (38) Wired remote control port (14)

(1)

(3)

(4)

(7)

(8)

(10)

(13)

(14)

(16)

(26)

(17)

(18)

(19)

(20)

(32)

(30)

(31)

(2)

(5)

(6)

(9)

(11)

(12)

(15)

(23)

(25)

(24)

(21)

(22)

(29)

(33)

(37)

(34) (36)

(35)

(27) (28)

(38)

Setting up

Install the projector appropriately for your environment and mounting situation.

When installing in a special application such as for ceiling mount application,

additional mounting accessories (Specications in the User’s Manual

(concise)) and service may be required. Before installing the projector, contact

your dealer about your application.

Arrangement

Besides the following, refer to tables T-1 to T-5 at the back of the User's Manual

(concise) to determine screen size and projection distance. The values shown in

the table are calculated for a full size screen.

Ⓗ× Ⓥ: Screen size

ⓐ: Projection distance

(from the front of the projector unit)

ⓑ,ⓒ: Screen height

(continued on next page)

Projector top

Projector bottom

Setting up

Arrangement (continued)

WARNING

(continued on next page)

►Install the projector where you can access the power

outlet easily. If something unusual occurs, unplug the projector immediately.

Otherwise a re or electric shock may occur.

►Do not subject the projector to unstable conditions. If the projector falls or

topples over, it could result in injury or damage the projector and other nearby

items. Using a damaged projector could result in a re and an electric shock.

• Do not place the projector in unstable places, such as an inclined surface,

places subject to vibration, on top of a wobbly table or cart, or a surface that is

smaller than the projector.

• Do not position the projector on its side, front or rear.

• Do not attach or place anything on the projector unless specied in this

manual.

• Do not use any mounting accessories except those specied by the

manufacturer. Read and keep the all accessory manuals.

• For special applications such as ceiling mount applications, contact your dealer

beforehand.

• IN5142, IN5144, IN5144a and IN5145 only: The projector can be installed in

any direction with appropriate mounting accessories. Contact your dealer about

such a situation.

• Place your hands on the grip on the bottom of the projector when carrying the

projector. Remove all the attachments from the projector, including the power

cord and cables, before carrying the projector.

►Do not install the pro

jector near thermally conductive or ammable

items. Such items when heated by the projector could result in a re and burns.

• Do not place the projector on a metal stand.

►Do not place the projector where any oils, such as cooking or machine

oil, are used. Oil may harm the product, resulting in malfunction, or falling from

the mounted position.

►Do not place the projector in a place where it may get wet. Getting the

projector wet or inserting liquid into the projector could cause a re or electric

shock, and damage the projector.

• Do not place the projector near water, such as in a bathroom, kitchen, or

poolside.

• Do not place the projector outdoors or by the window.

• Do not place anything containing liquid near the projector.

Setting up

Arrangement (continued)

►Place the projector in a cool place with sufcient

ventilation. The projector may shutdown automatically or may malfunction if its

internal temperature is too high.

• Using a damaged projector could result in a re and an electric shock.

• Do not place the projector in direct sunlight or near hot objects such as heaters.

• Do not place the projector where the air from an air conditioner or similar unit

will blow on it directly.

• Keep a space of 30 cm or more between the side of the projector and other

objects such as walls.

• Do not place the projector on carpet, cushions or bedding.

• Do not plug, block or cover the projector's ventilation holes. Do not place

anything around the projector that could be sucked in or stick to the projector's

intake vents.

• Do not place the projector where it can be exposed to magnetic elds. Doing

so can cause the cooling fans inside the projector to malfunction.

►Avoid placing the projector in smoky, humid or dusty places. Placing

the projector in such places could cause a re, an electric shock and projector

malfunction.

• Do not place the projector near humidiers. In particular, ultrasonic humidiers

atomize chlorine and minerals from the tap water and can leave deposits inside

the projector causing image degradation and other problems.

• Do not place the projector in a smoking area, kitchen, passageway or by a

window.

• Position the projector to prevent light from directly hitting the

projector's remote sensor.

• Do not place the product in a place where radio interference may be caused.

• Set the ALTITUDE of the SERVICE item in the OPTION menu correctly. We

recommend leaving it set to AUTO under normal circumstances (69). If the

projector is used with a wrong setting, it may damage the projector itself or the

parts inside.

• Keep heat-sensitive items away from the projector. Otherwise, they may be

damaged by the heat from the projector.

CAUTION

NOTICE

Setting up

Connecting your devices

Before connecting the projector to a device, consult the device manual to

conrm that the device is compatible with this projector and prepare the required

accessories, such as appropriate cables. Contact your dealer when the required

accessory did not come with the product or an accessory is damaged.

After verifying that the projector and the devices are turned off, make all

connections per the following instructions. Refer to the illustrations on the

subsequent pages. Before connecting the projector to a network system, be sure

to read Network Guide too.

►Use only compatible accessories. Otherwise a re or damage may occur to

the projector and devices.

• Only use accessories specied and recommended by the

projector’s manufacturer. Some regulations may apply.

• Do not disassemble or modify the projector or its accessories.

• Do not use damaged accessories. Be careful not to damage the accessories.

Route cables so that they cannot be stepped on or pinched.

►For a cable with a core at only one end, connect the end with the core to

the projector. That may be required by EMI regulations.

WARNING

• Do not turn the projector on or off while connected to a device

in operation, unless specied by the device manual. Otherwise a device or

projector malfunction may occur.

CAUTION

• Plug-and-Play is a system composed of a computer, its operating system

and peripheral equipment (i.e. display devices). This projector is VESA DDC

2B compatible. Plug-and-Play can be used by connecting this projector to a

computer that is VESA DDC (display data channel) compatible.

- Take advantage of this feature by connecting a computer cable to the

COMPUTER IN1 port (DDC 2B compatible). Plug-and-Play may not work

properly if any other type of connection is attempted.

- Use standard drivers in your computer as this projector is a Plug-and-Play

monitor.

• Some input port functions can be selected based on your usage

requirements. Check the reference page indicated beside each port in the

following illustration.

• Be careful not connect a connector to a wrong port. Otherwise a device or

projector malfunction may occur.

- When connecting a connector to a port, make sure that the shape of the

connector ts the port.

- Tighten the screws to connect a connector equipped with screws to a port.

- Use cables with straight plugs, not L-shaped ones, as the input ports of the

projector are recessed.

About Plug-and-Play capability

NOTE

(continued on next page)

Autres manuels pour IN5132

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels InFocus Projecteur

InFocus

InFocus IN32 Manuel utilisateur

InFocus

InFocus LP860 Manuel d'installation

InFocus

InFocus X16 Manuel utilisateur

InFocus

InFocus IN5542 Manuel utilisateur

InFocus

InFocus LASER PROJECTOR LP 540 Manuel utilisateur

InFocus

InFocus SP5700 Manuel utilisateur

InFocus

InFocus IN3924 Manuel utilisateur

InFocus

InFocus LitePro 210 Manuel utilisateur

InFocus

InFocus Play Big IN1 Manuel utilisateur

InFocus

InFocus X1 Guide de configuration

InFocus

InFocus LP 850 Manuel utilisateur

InFocus

InFocus F5500 Manuel utilisateur

InFocus

InFocus LP 425 LiteMount Manuel utilisateur

InFocus

InFocus in3138hd Manuel utilisateur

InFocus

InFocus SCREEN PLAY 7205 Manuel utilisateur

InFocus

InFocus SP7200 Manuel utilisateur

InFocus

InFocus LP925 Manuel utilisateur

InFocus

InFocus OverView 410P Manuel utilisateur

InFocus

InFocus in2100 Series Manuel utilisateur

InFocus

InFocus SP4805 Manuel utilisateur

InFocus

InFocus Proxima DP6870 Manuel utilisateur

InFocus

InFocus LASER PROJECTOR LP 540 Manuel utilisateur

InFocus

InFocus LP 120 Manuel utilisateur

InFocus

InFocus SP5000 Manuel utilisateur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur

Asus

Asus ZenBeam Latte Manuel utilisateur