Infineon XC800 Series Mode d’emploi

XC800 Family

Guide to using the DALI LightNet tool

AP08104

Microcontrollers

Application Note

V1.4, 2012-10

Edition 2012-10

Published by

Infineon Technologies AG

81726 Munich, Germany

LEGAL DISCLAIMER

THE INFORMATION GIVEN IN THIS APPLICATION NOTE IS GIVEN AS A HINT FOR THE IMPLEMENTATION

OF THE INFINEON TECHNOLOGIES COMPONENT ONLY AND SHALL NOT BE REGARDED AS ANY

DESCRIPTION OR WARRANTY OF A CERTAIN FUNCTIONALITY, CONDITION OR QUALITY OF THE

INFINEON TECHNOLOGIES COMPONENT. THE RECIPIENT OF THIS APPLICATION NOTE MUST VERIFY

ANY FUNCTION DESCRIBED HEREIN IN THE REAL APPLICATION. INFINEON TECHNOLOGIES HEREBY

DISCLAIMS ANY AND ALL WARRANTIES AND LIABILITIES OF ANY KIND (INCLUDING WITHOUT

LIMITATION WARRANTIES OF NON-INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS OF ANY

THIRD PARTY) WITH RESPECT TO ANY AND ALL INFORMATION GIVEN IN THIS APPLICATION NOTE.

Information

For further information on technology, delivery terms and conditions and prices, please contact the nearest

Infineon Technologies Office (www.infineon.com).

Warnings

Due to technical requirements, components may contain dangerous substances. For information on the types in

question, please contact the nearest Infineon Technologies Office.

Infineon Technologies components may be used in life-support devices or systems only with the express written

approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure

of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support

devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain

and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may

be endangered.

Application Note 3 V1.4, 2012-10

Guide to using the DALI LightNet tool

AP08104

Trademarks

XC83x

Revision History: V1.4 2012-10

Previous Version(s): V1.3

Page Subjects (major changes since last revision)

– Updated DALI Control Gear Schematic Part 1; Changed R5 from 1K to 560R

We Listen to Your Comments

Is there any information in this document that you feel is wrong, unclear or missing? Your feedback will help us to

continuously improve the quality of this document. Please send your proposal (including a reference to this document) to:

mcdocu.comment[email protected]

Guide to using the DALI LightNet tool

AP08104

Table of Contents

Application Note 4 V1.4, 2012-10

Table of Contents

1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2 Getting started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2.1 AP08104 Software Package . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2.2 LightNet Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2.3 DALI Control Device Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

2.4 DALI Control Gear Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

2.5 Hardware Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

2.5.1 Setting up the Control Device for LightNet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

2.5.2 Setting up the Control Gear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2.5.3 Connecting DALI Master and Slave to the DALI Bus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

3 LightNet Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

3.1 Connecting the LightNet tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

3.2 Address Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

3.3 General Control & Status Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

3.4 Detailed Configuration Command Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

3.5 Memory Access Control Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

4 Summary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

5 References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

APPENDIX - DALI PHY Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

APPENDIX - DALI Control Gear Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Guide to using the DALI LightNet tool

AP08104

Overview

Application Note 5 V1.4, 2012-10

1Overview

Digital Addressable Lighting Interface (DALI) is a communication protocol for lighting control in buildings. The

interface was first described in the IEC60929 standard for fluorescent lamp ballast, Annex E. The standard was

subsequently updated to include other lighting devices, such as LED, HID, etc., to become IEC-62386. The

complete standard for control interface of electronic control gears was published in June 2009, while the standard

for lighting control devices is scheduled to be published in 2012.

Only a pair of wires are required to form the bus for communication to all devices on a single DALI network. Each

piece of operating equiment with a DALI interface can be communicated with individually. Using a bi-directional

data exchange, a DALI controller can query and set the status of each connected lighting device. As a standalone

system, DALI can be operated with a maximum of 64 devices. Alternatively, DALI can be used as a subsystem via

DALI gateways for connection to building management systems.

Figure 1 DALI system types

Complex System : Multiple DALI systems can be connected together utilising gateways to building

management systems . Software programs offer more sophisticated programming functionality for

grouped systems , such as scenesetting, timeclock , and partition control.

Grouped System : Brightness control within large open- plan office, lecture halls or conference

rooms . DALI can provide zoned or localised control of lighting. Control could be offered through

infra-red remote control or a software control with GUI support, or used together as an easy

configuration tool to group loads together. Offering flexibility in customised lighting.

DALI Bus

DALI Control Gear

(e.g. Lamp)

DALI Control Device(s)

(e.g. Control Panel, Remote Controller

, software control with GUI support)

DALI Control Gear

(e.g. Lamp)

Can connect up to 64

DALI Control Gear

Building

Management

System

DALI Bus

DALI Control Gear

(e.g. Lamp)

DALI Control Device(s)

(e.g. Control Panel, Remote Controller

, software control with GUI support)

DALI Control Gear

(e.g. Lamp)

Can connect up to 64

DALI Control Gear

Gateway Gateway

DALI

Systems

Gateway

DALI

Systems

Gateway

DALI

Systems

DALI Power

Supply

DALI Power

Supply

Guide to using the DALI LightNet tool

AP08104

Overview

Application Note 6 V1.4, 2012-10

Figure 2 Block Diagram for DALI Control Device and Control Gear

Infineon has developed a solution for control gears based on the published IEC standard. The DALI Software

Stack for Control Gear has been designed around the Infineon XC83x devices. ‘LightNet’ has been created to

mimic the basic functions of a lighting control device and can therefore be used to evaluate the software. This

document describes the setup of the LightNet tool.

The following items are required for use with this application note:

• 1x XC836 Easy Kit (to serve as a DALI Control Device; KIT_XC836_EK_V1)

• 1x DALI PHY (KIT_XC822_XC836_DALI)

• 1x XC836 DALI Slave (KIT_DALI_RGB_XC836_DKV1) including DALI Control Gear Software Stack

(AP08102)

• Infineon DALI LightNet tool

LightNET

DALI configuration SW

for groups and scenes

Power

Supply

USB/UART

PC Connector

XC83x

SW Stack

DALI

PHY

XC83x

SW Stack

DALI

PHY

XC83x

SW Stack

DALI

PHY

DALI BUS

Easy Kit as

DALI Master Board

XC83x

DALI Slave Board

XC83x

DALI Slave Board

Guide to using the DALI LightNet tool

AP08104

Getting started

Application Note 7 V1.4, 2012-10

2 Getting started

This section is a guide to installing LightNet.

2.1 AP08104 Software Package

This software package consists of the installation package for the LightNet software running on the computer and

a DALI Software for Control Device developed to support the use of the LightNet tool.

The following figures step through the software installation on the user’s computer.

Figure 3 Copying ap08104

Figure 4 Selecting destination location

Guide to using the DALI LightNet tool

AP08104

Getting started

Application Note 8 V1.4, 2012-10

Figure 5 Start the copy process

Figure 6 Copy completed

2.2 LightNet Installation

The LightNet software is designed to provide the control device the facility to send basic DALI commands to the

connected control gear. Installation is only to be performed once, using the file: LightNet_setup_V1_3.exe.

The following figures step through the LightNet tool installation process.

Guide to using the DALI LightNet tool

AP08104

Getting started

Application Note 9 V1.4, 2012-10

Figure 7 LightNet tool installation window

Guide to using the DALI LightNet tool

AP08104

Getting started

Application Note 10 V1.4, 2012-10

Figure 8 LightNet tool license agreement

Figure 9 LightNet tool destination location selection

Autres manuels pour XC800 Series

Table des matières

Autres manuels Infineon Microcontrôleur

Infineon

Infineon iMOTION2go Manuel utilisateur

Infineon

Infineon PSoC 4000 Series Manuel du produit

Infineon

Infineon TriBoard TC176X Manuel utilisateur

Infineon

Infineon TLE984 Series Manuel utilisateur

Infineon

Infineon PSoC 6 Manuel utilisateur

Infineon

Infineon TLE984 QX Series Manuel utilisateur

Infineon

Infineon TRAVEO T2G Cluster 4M Lite Kit Manuel utilisateur

Infineon

Infineon PG-TO252 DPAK Manuel utilisateur

Infineon

Infineon CY4613 Manuel utilisateur

Infineon

Infineon C166S V1 SubSystem Manuel utilisateur

Infineon

Infineon XC164CM Series Manuel utilisateur

Infineon

Infineon Cypress CY8CKIT-042 Mode d'emploi

Infineon

Infineon XMC1000 Manuel utilisateur

Infineon

Infineon XMC4000 series Manuel utilisateur

Infineon

Infineon XMC4000 series Guide d'application

Infineon

Infineon XC800 AP08113 Instructions d'installation et d'utilisation

Infineon

Infineon C166 Series Instructions d'installation et d'utilisation

Infineon

Infineon TC2X4 Manuel utilisateur

Infineon

Infineon XMC4700 Manuel utilisateur

Infineon

Infineon PSoC 63 Manuel utilisateur

Infineon

Infineon IKW40N65WR5 Manuel utilisateur

Infineon

Infineon XMC1400 Manuel utilisateur

Infineon

Infineon Cypress PSoC 4500S Pioneer Kit Manuel utilisateur

Infineon

Infineon XMC7000 Series Manuel utilisateur

Manuels Microcontrôleur populaires d'autres marques

AMS

AMS AS7261 Demo Kit Manuel utilisateur

Novatek

Novatek NT6861 Manuel utilisateur

Espressif Systems

Espressif Systems ESP8266 SDK Guide de configuration

Nuvoton

Nuvoton ISD61S00 ChipCorder Mode d’emploi

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Manuel utilisateur

Texas Instruments

Texas Instruments Chipcon CC2420DK Manuel utilisateur

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Manuel utilisateur

NEC

NEC 78GK0S/K 1+ Series Instructions d'installation et d'utilisation

Mikroe

Mikroe SEMITECH N-PLC Click Instructions d'installation et d'utilisation

Intel

Intel Agilex Manuel utilisateur

Cypress

Cypress CY4607 HX2VL Manuel utilisateur

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Manuel utilisateur

Texas Instruments

Texas Instruments TMS320F2837 D Series Manuel utilisateur

CYPRES

CYPRES CY14NVSRAMKIT-001 Manuel utilisateur

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Manuel utilisateur

Espressif Systems

Espressif Systems ESP8266EX Mode d'emploi

Abov

Abov AC33M8128L Manuel utilisateur

Laird

Laird BL654PA Manuel utilisateur