Infineon HX3 Manuel utilisateur

www.infineon.com

Please note that Cypress is an Infineon Technologies Company.

The document following this cover page is marked as “Cypress” document as this is the

company that originally developed the product. Please note that Infineon will continue

to oﬀer the product to new and existing customers as part of the Infineon product

The fact that Infineon oﬀers the following product as part of the Infineon product

portfolio.

Continuity of document content

portfolio does not lead to any changes to this document. Future revisions will occur

when appropriate, and any changes will be set out on the document history page.

Continuity of ordering part numbers

Infineon continues to support existing part numbers. Please continue to use the

ordering part numbers listed in the datasheet for ordering.

HX3 USB 3.0 HUB REFERENCE DESIGN KIT (RDK)

CY4609 QUICK START GUIDE

Step 1: Conguring the HX3 Board

• Unpack the kit contents which includes RDK board, 5-V 4-A

AC-DC adapter and the USB 3.0 A to micro-B cable

• Ensure that the conguration mode select jumpers (J6

and J7)

are set for default operation, as shown above

Step 2: Powering the HX3

Board

• Plug the AC-DC adapter into an AC wall power receptacle.

Connect the power supply plug to the board’s DC supply

jack. The power LED (PWR) glows green to indicate that

the board is powered and the suspend status LED (SUSP)

glows amber to indicate that the hub is in suspend mode

3 4

Step 3: Connecting the HX3

Board

to a USB 3.0 PC / Laptop

• Connect the micro-B end of the USB cable to the

board’s

upstream port; connect the other end to the USB 3.0

receptacle on a PC / laptop. The SUSP LED* turns off

(on a PC / laptop running Windows 7 operating system)

Step 4: Demonstrating USB 3.0 Data Transfer

• Get a USB 3.0 certied ash drive and store a 2 GB le.

Connect the ash drive to one of the downstream ports

• Copy the 2 GB le from the ash drive to the PC / laptop

to transfer data in USB 3.0 mode

Step 5: Demonstrating Battery Charging

•Connect an Apple device or an USB battery charging

device to any of the downstream ports. The HX3 board

will charge the connected device

Note: When the Ghost Charging feature is enabled, charging

of the device stops momentarily and resumes in 1-2 seconds

Step 6: Demonstrating Ghost ChargingTM

• Disconnect the USB cable from the upstream port to detach

the board from the PC / laptop. The device connected to

the

downstream port continues to be charged using the

Ghost ChargingTM feature

Conguration

mode select

jumpers

Indicates the revision of

the HX3 silicon. "D"

indicates HX3 Rev *D

silicon

Note: HX3 silicon supports

internal ROM Boot feature

from Rev *C onwards.

Install shunts on pins 1

and 2 of jumpers J6 and

J7 to boot from

Internal ROM

DC Supply

Jack (J1)

USB 3.0

port on the

PC/Laptop

USB cable

connected to

upstream port

Battery charging

through a

downstream port

USB 3.0 ash drive connected

to a downstream port

Power

LED (PWR)

* The behavior of the SUSP LED varies across operating systems.

For e.g, in Windows 8, the SUSP LED turns off momentarily and turns

on again when there is no further USB activity on the board

Suspend Status

LED (SUSP)

Suspend

Status

LED (SUSP)

Pin 3 Pin 2 Pin 1

Downstream Port 3

(DS3/J3)

Downstream Port 2

(DS2/J5)

Downstream Port 1

(DS1/J9)

Power LED

(PWR)

Suspend

Status LED

(SUSP)

5-V DC

Supply

Jack (J1)

Conguration

Mode Select

Jumpers (J6 and J7)

USB 3.0 Upstream Port

(US/J8)

Downstream Port 4

(DS4 / J4)

HX3 (MPN:

CYUSB3304-

68LTXC)

Reset Switch

(SW1)

5-V to 3.3-V

Regulator (U2)

CY4609 QUICK START GUIDE

For the latest information about HX3 products, visit www.cypress.com/hx3

HX3 USB 3.0 HUB REFERENCE DESIGN KIT (RDK)

Kit Operation: CY4609 is the reference design kit for CYUSB3304-68LTXC, a 4-port USB 3.0 hub controller from

Cypress. The hub controller supports Low-Speed (LS), Full-Speed (FS), Hi-Speed (HS) and SuperSpeed (SS) peripherals

on all the four downstream ports. It goes into Suspend state to save power when the upstream port is not connected to

a PC / laptop. All the downstream ports are compliant to USB Battery Charging Specication v1.2; they also emulate

Apple charging. The hub controller also supports Ghost Charging, a unique feature where the downstream ports

emulate Dedicated Charging Port (DCP) to support battery charging even when the upstream port of the board is not

connected to a PC / laptop.

The hub controller can be congured for parameters such as vendor ID, product ID, etc. using a Windows based PC

tool named Blaster Plus. The congured values are stored in an on-board EEPROM. This tool also can be used to

download the latest HX3 rmware to the on-board EEPROM. To access the Blaster Plus tool, the kit user guide, and

the hardware design les, download the RDK EXE le (CY4609HX3RDKSetup.exe) from www.cypress.com/CY4609.

Click the EXE le and follow the steps in the installer window.

Sensitive Area -

Do not touch

herein are the property of their respective owners. 001-90183 Rev.*E

Ce manuel convient aux modèles suivants

Autres manuels Infineon Microcontrôleur

Infineon

Infineon Cypress PSoC CY8CKIT-147 Manuel utilisateur

Infineon

Infineon High Side Switch Shield Manuel utilisateur

Infineon

Infineon XC800 Series Instructions d'installation et d'utilisation

Infineon

Infineon PSoC 4000 Series Manuel du produit

Infineon

Infineon XMC4000 series Guide de l'utilisateur

Infineon

Infineon TLE985 Series Manuel utilisateur

Infineon

Infineon PROFET+2 12V Arduino Shield Manuel utilisateur

Infineon

Infineon XMC4300 Relax EtherCAT Kit-V1.1 Manuel utilisateur

Infineon

Infineon EVAL-M3-302FTOBO1 Manuel utilisateur

Infineon

Infineon iMOTION2go Manuel utilisateur

Infineon

Infineon PSoC 4 Manuel de l'opérateur

Infineon

Infineon FX3 EZ-USB DEMO_FX3_LVDS_CAM01 Manuel utilisateur

Infineon

Infineon AIROC CYW20829 Manuel utilisateur

Infineon

Infineon XMC4700 Manuel utilisateur

Infineon

Infineon CY4613 Manuel utilisateur

Infineon

Infineon PG-TO252 DPAK Manuel utilisateur

Infineon

Infineon XMC7000 Series Manuel utilisateur

Infineon

Infineon AIROC CYW20829 Manuel utilisateur

Infineon

Infineon XDPL8220 Manuel utilisateur

Infineon

Infineon DriveCard XMC4400 V1 Manuel utilisateur

Infineon

Infineon EZ-PD PMG1 Manuel utilisateur

Infineon

Infineon XMC4000 series Guide d'application

Infineon

Infineon TLE9562 Manuel utilisateur

Infineon

Infineon XE166 Series Manuel utilisateur

Manuels Microcontrôleur populaires d'autres marques

AMS

AMS AS7261 Demo Kit Manuel utilisateur

Novatek

Novatek NT6861 Manuel utilisateur

Espressif Systems

Espressif Systems ESP8266 SDK Guide de configuration

Nuvoton

Nuvoton ISD61S00 ChipCorder Mode d’emploi

STMicrolectronics

STMicrolectronics ST7 Assembler Linker Manuel utilisateur

Texas Instruments

Texas Instruments Chipcon CC2420DK Manuel utilisateur

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM Manuel utilisateur

NEC

NEC 78GK0S/K 1+ Series Instructions d'installation et d'utilisation

Mikroe

Mikroe SEMITECH N-PLC Click Instructions d'installation et d'utilisation

Intel

Intel Agilex Manuel utilisateur

Cypress

Cypress CY4607 HX2VL Manuel utilisateur

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE Manuel utilisateur

Texas Instruments

Texas Instruments TMS320F2837 D Series Manuel utilisateur

CYPRES

CYPRES CY14NVSRAMKIT-001 Manuel utilisateur

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM Manuel utilisateur

Espressif Systems

Espressif Systems ESP8266EX Mode d'emploi

Abov

Abov AC33M8128L Manuel utilisateur

Laird

Laird BL654PA Manuel utilisateur