ICP DAS USA EIP-2000 Series Guide d'installation

ICP DAS

EIP-2000 FAQ

FAQ Version 1.5

ICP DAS Co., Ltd.

2022-12-01

Table of Contents

Q1：How to connect to the Allen-Bradley PLC？ ................................................................................................ 3

Q2：How to use EDS file of EIP-2000 series？ .................................................................................................. 7

Q3: When I click the “Network Scan” button, and it pop-up a “Can not find any module” window. What should I

do?.................................................................................................................................................................... 11

Q4: The AI status we get from the EIP-2017/EIP-2019 is different with the real AI value. How do I solve this

problem? ........................................................................................................................................................... 11

Q5: If I forget the IP address of the EIP-2000 modules, how do I search them? ................................................ 12

Q6: I can't update the firmware with the Utility, how should I do? ...................................................................... 12

Q7: How to know the version of EIP-2000 modules hardware? ......................................................................... 12

Q8: How to find the compatible FW for EIP-2000 modules? .............................................................................. 13

Q9: Is there any LabVIEW sample to EIP-2000 modules? ................................................................................ 13

Q10: What is an EDS file? ................................................................................................................................ 14

Q11: Where can I download the EDS file of EIP-2000? ..................................................................................... 14

Q12: What is the Instance ID of EIP-2000 series? ............................................................................................ 14

Q13: What is the data length of the EIP-2000 series? ....................................................................................... 14

Q14: I can ping the EIP-2000 module, but I cannot use the EIP-2000 Utility for setting and communication

testing. How to solve this problem? ................................................................................................................... 15

Q15: If I forget the network settings of the EIP-2000 module, besides restoring the original factory settings, is

there any other solution? ................................................................................................................................... 17

Q16: When I cannot use the EIP-2000 Utility to scan the button, how can I configure or test the connection of

the EIP-2000 module? ...................................................................................................................................... 18

Q17: I can’t measure the current value when I change EIP-2017 to the Single-Ended mode. What can I do? .. 18

Q1：How to connect to the Allen-Bradley PLC？

A1：It is tested and confirmed that the EIP-2000 can be connected to the Allen-BradleyTM ControlLogix

Logix 5563 through the 1756-ENBT ControlLogix EtherNet/IP Module successfully. The configuration

software is RSLogix 5000. Please follow the steps below:

Open RSLogix 5000 and create a new project.

Figure1-1. Create a new project.

Select the PLC type and give the project a name.

Figure1-2. Set the PLC type and project name.

Create a new module in the “Ethernet” item.

Figure 1-3. Create a new module.

Select the “ETHERNET-MODULE” below “Communications” in the Select Module window.

Figure1-4. Select “ETHERNET-MODULE”.

Configure the new module parameters. The I/O length of new module must be the same with the

length of EIP-2000 I/O data. The data assembly please refer to Table 1-1 and the instance ID

please refer to Table 1-2.

Figure1-5. The settings of EIP-2055

Table 1-1. Data Assembly of EIP-2000

Module

Data Assembly Byte

count

Description

EIP-2055

Input Assembly

1st Byte: DI status

2nd Byte: DO status read back

3rd~34th Byte: DI counters

Output

Assembly

1st Byte: DO status

2nd Byte: to set DI counters zero

EIP-2060

Input Assembly

1st Byte: DI status

2nd Byte: DO status read back

3rd~26th Byte: DI counters

Output

Assembly

1st Byte: DO status

2nd Byte: to set DI counters zero

EIP-2042

Input Assembly

1st Byte: DO status read back (DO0~DO7).

2nd Byte: DO status read back (DO8~DO15).

Output

Assembly

1st Byte: DO status (DO0~DO7).

2nd Byte: DO status (DO8~DO15).

EIP-2051

Input Assembly

1st Byte: DI status(DI0~DI7).

2nd Byte: DI status(DI8~DI15).

3rd~65th Byte: DI counters.

Output

Assembly

1st Byte: to set DI counters zero (DI0~DI7).

2nd Byte: to set DI counters zero (DI8~DI15).

EIP-2017

Input Assembly

1st ~ 16th Byte: AI status(AI0~7) for DIFF. or S.E.

mode.

17nd ~ 31th Byte: AI status(AI8~15) for S.E. mode

only.

Output

Assembly

1st Byte: Set value to the module.

2nd ~ 17th Byte: Set type code to AI0~AI15.

18th Byte: Filter selection of AI

19th Byte: Channel mode selection DIFF. or S.E.

20th Byte: AI representation

21th Byte: AI channel selection (AI0 ~ AI7)

22th Byte: AI channel selection (AI8 ~ AI15)

EIP-2019

Input Assembly

1st ~ 16th Byte: AI status(AI0~AI7).

17nd ~ 18th Byte: The Brocken wire status.

19rd ~ 20th Byte: CJC status.

Output

Assembly

1st Byte: Set value to the module.

2nd ~ 7th Byte: Set type code to Ch0~Ch7.

8th Byte: Filter selection of AI

9th Byte: Wire break detector

10th Byte: AI representation

11th Byte: Select AI channel to be short

12th Byte: CJC switch

13th Byte: CJC increment

14th ~ 21th Byte:CJC Offset

Table 1-2. Instance ID table of EIP-2000

Implicit Message Information of EIP-2000

Instance Instance ID Data length

Input(T->O) 65hex(101) Depends on modules.

e.g.34(EIP-2055)

Out(O->T) 66hex(102) Depends on modules.

e.g.2(EIP-2055)

Configuration 64hex(100)

Q2：How to use EDS file of EIP-2000 series？

A2：EDS file is a convenient way to make the connection between EtherNet/IP Scanner and Adapter.

All the EIP-2000 series EDS file can be download on our website:

http://www.icpdas.com/products/Remote_IO/can_bus/EtherNet_IP_series.htm

We provide the connection steps of Hilscher CIFX 50-RE with EIP-2055 EDS file. The configuration

software is SYNCON.net. Please refer to the steps below：

Open SYNCON.net and create a new project.

Figure2-1 Create a new project.

To find the “CIFX RE/EIM” item below “EtherNet/IP -> Master”, and drag the “CIFX RE/EIM” to the

busline.

Figure2-2 Select CIFX RE/EIM

Click “Network” and select “Import Device Descriptions”.

Figure2-3 Import Device Descriptions

To select the EDS file you download on our website of CD.

Figure2-4 Select EDS file

To find the “EIP-2055 EDS V1.1” item below “EtherNet/IP -> Slave”, and drag the “EIP-2055 EDS

V1.1” to the busline.

Figure2-5 EIP-2055 EDS

To configure CIFX RE/EIM and EIP-2055 in the same network area.

Figure2-6 Network Settings

Right click the CIFX_RE/EIM and click “Download”.

Figure2-7 Download configurations.

Right click the CIFX_RE/EIM again and click “Start Communication”.

Figure2-8 Start Communication

The communication is complete. You can observe the I/O status on the Diagnostic window.

Figure2-9 I/O status observation

Autres manuels pour EIP-2000 Series

Table des matières

Autres manuels ICP DAS USA Unité de contrôle

ICP DAS USA

ICP DAS USA ET-87P2 Manuel utilisateur

ICP DAS USA

ICP DAS USA MDC-700 Series Manuel utilisateur

ICP DAS USA

ICP DAS USA M-7053D Manuel utilisateur

ICP DAS USA

ICP DAS USA PM-3133i Manuel utilisateur

ICP DAS USA

ICP DAS USA MDC-700 Series Manuel utilisateur

ICP DAS USA

ICP DAS USA tSH-734 Manuel utilisateur

ICP DAS USA

ICP DAS USA I-8094 Manuel de la liste des pièces

ICP DAS USA

ICP DAS USA I-8213W-4G Manuel utilisateur

ICP DAS USA

ICP DAS USA PET-7261 Manuel utilisateur

ICP DAS USA

ICP DAS USA tGW-700 Series Manuel utilisateur

ICP DAS USA

ICP DAS USA DS-2200 Series Manuel utilisateur

ICP DAS USA

ICP DAS USA WF-2026 Manuel utilisateur

ICP DAS USA

ICP DAS USA I-7060D Manuel utilisateur

ICP DAS USA

ICP DAS USA tDS-700-T Series Manuel utilisateur

ICP DAS USA

ICP DAS USA tM-TH8 Manuel utilisateur

ICP DAS USA

ICP DAS USA I-8092F Manuel de la liste des pièces

ICP DAS USA

ICP DAS USA 7188EN Guide d'installation

ICP DAS USA

ICP DAS USA SG-3016 Manuel utilisateur

ICP DAS USA

ICP DAS USA ET-7000 series Manuel utilisateur

ICP DAS USA

ICP DAS USA ET-87P2 Manuel utilisateur

ICP DAS USA

ICP DAS USA I-7063 Manuel utilisateur

ICP DAS USA

ICP DAS USA M-7024 Manuel utilisateur

ICP DAS USA

ICP DAS USA tSH-725 Manuel utilisateur

ICP DAS USA

ICP DAS USA SG-3784M Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur