IBM Computer Instructions d'utilisation

Redbooks Paper

Hardware Management Console

(HMC) Case Configuration Study for

LPAR Management

This IBM® Redpaper provides Hardware Management Console (HMC)

configuration considerations and describes case studies about how to use the

HMC in a production environment. This document does not describe how to

install the HMC or how to set up LPARs. We assume you are familiar with the

HMC. Rather, the case studies presented in this Redpaper provide a framework

to implement some of the more useful HMC concepts. It provides examples to

give you ideas on how to exploit the capabilities of the HMC.

The topics discussed in this Redpaper are:

򐂰Basic HMC considerations

򐂰Partitioning considerations

򐂰Takeover case study:

– Description of the scenario

– Setting up remote ssh connection to the HMC

– Using the HMC to perform CoD operations

– Examples of dynamic LPAR operations

– Using micropartitioning features

– Security considerations

Dino Quintero

Sven Meissner

Andrei Socoliuc

2Hardware Management Console (HMC) Case Configuration Study for LPAR Management

򐂰Automation

򐂰High availability considerations for HMCs

Introduction and overview

The Hardware Management Console (HMC) is a dedicated workstation that

allows you to configure and manage partitions. To perform maintenance

operations, a graphical user interface (GUI) is provided.

Functions performed by the HMC include:

򐂰Creating and maintaining a multiple partition environment

򐂰Displaying a virtual operating system session terminal for each partition

򐂰Displaying a virtual operator panel of contents for each partition

򐂰Detecting, reporting, and storing changes in hardware conditions

򐂰Powering managed systems on and off

򐂰Acting as a service focal point

򐂰Activating CoD

Although this Redpaper contains information relevant to POWER4 systems, our

focus is on the HMC configuration for POWER5 systems. The case studies are

illustrated with POWER5 systems only.

Basic HMC considerations

The Hardware Management Console (HMC) is based on the IBM eServer™

xSeries® hardware architecture running dedicated applications to provide

partition management for single or multiple servers called managed systems.

There are two types of HMCs depending on the CPU architecture of the

managed systems:

򐂰HMC for POWER4 systems

򐂰HMC for POWER5 systems

Table 1 shows the current list of the hardware models for HMCs supported in a

POWER4 or POWER5 environment. The HMCs are available as desktop or

rack-mountable systems.

Note: POWER4™ systems use a serial line to communicate with the HMC.

This has changed with POWER5™. The POWER5 systems use a LAN

connection to communicate with the HMC. POWER4 and POWER5 systems

cannot be managed by the same HMC.

Hardware Management Console (HMC) Case Configuration Study for LPAR Management 3

Table 1 Types of HMCs

The HMC 3.x code version is used for POWER4 managed systems and HMC 4.x

for POWER5 systems (iSeries™ and pSeries®). For managing POWER5

pSeries machines, HMC 4.2 code version or later is required.

Table 2 shows a detailed relationship between the POWER5 pSeries servers and

the supported HMCs.

Table 2 Supported HMCs for pSeries and OpenPower platforms

Type Supported managed

systems HMC code version

7315-CR3 (rack mount) POWER4 or POWER51HMC 3.x, HMC 4.x, or

HMC 5.x

7315-C04 (desktop) POWER4 or POWER51HMC 3.x, HMC 4.x, or

HMC 5.x

7310-CR3 (rack mount) POWER5 HMC 4.x or HMC 5.x

7310-C04 (desktop) POWER5 HMC 4.x or HMC 5.x

1- Licensed Internal Code needed (FC0961) to upgrade these HMCs to manager POWER5 systems. A single

HMC cannot be used to manage a mixed environment of POWER4 and POWER5 systems.

Managed system HMC model supported HMC required

p505 7310-C04 or 7310-CR33No1

p510 7310-C04 or 7310-CR33No1

p520 7310-C04 or 7310-CR33No1

p550 7310-C04 or 7310-CR33No1

p570 7310-C04 or 7310-CR33No1

p575 7310-C04 or 7310-CR33Yes2

p590 7310-C04 or 7310-CR33Yes2

p595 7310-C04 or 7310-CR33Yes2

OpenPower™ 720 7310-C04 or 7310-CR33No1

OpenPower 710 7310-C04 or 7310-CR33No1

1 - An HMC is not required if the system runs in full system partition. For a partitioned

environment an HMC is required.

2- It is recommended to have two HMCs installed for high availability considerations.

3- Previous HMC models with the latest HMC code level are also supported.

4Hardware Management Console (HMC) Case Configuration Study for LPAR Management

The maximum number of HMCs supported by a single POWER5 managed

system is two. The number of LPARs managed by a single HMC has been

increased from earlier versions of the HMC to the current supported release as

shown in Table 3.

Table 3 HMC history

HMC connections

During the installation of the HMC, you have to consider the number of network

adapters required. You can have up to three Ethernet adapters installed on an

HMC. There are several connections you have to consider when planning the

installation of the HMC:

򐂰HMC to the FSP (Flexible Service Processor): It is an IP-based network used

for management functions of the POWER5 systems; for example, power

management and partition management.

POWER5 systems have two interfaces (T1 and T2) available for connections

to the HMC. It is recommended to use both of them for redundant

configuration, and high availability. Depending on your environment, you

have multiple options to configure the network between the HMC and FSP.

The default mechanism for allocation of the IP addresses for the FSP ports is

dynamic. The HMC can be configured as a DHCP server which allocates the

IP address at the time the managed system is powered on. Static IP address

allocation is also an option. You can configure the FSP ports with a static IP

address by using the Advanced System Management Interface (ASMI)

HMC code No. of

HMCs No. of

servers No. of

LPARs Other information

4.1.x 1 4 40 iSeries Only

4.2.0 2 16 64 p5 520 550 570

4.2.1 2 32 160 OpenPower 720

4.3.1 2 32 254 p5 590 595

4.4.0 2 32 254 p5 575

HMC 7310-CR3/C04

4.5.0 2 32/48 254 48 for non 590/595

5.1.0 2 32/48 254 48 for non 590/595

Note: It is recommended to configure this connection as a private network.

Hardware Management Console (HMC) Case Configuration Study for LPAR Management 5

menus. However not all POWER5 servers support this mechanism of

allocation. Currently p575, p590, and p595 servers support only DHCP.

򐂰HMC to partitions: HMC requires TCP/IP connection to communicate with the

partitions for functions such as dynamic LPAR and Service Focal Point.

򐂰Service Agent (SA) connections: SA is the application running on the HMC for

reporting hardware failures to the IBM support center. It uses a modem for

dial-out connection or an available Internet connection. It can also be used to

transmit service and performance information to IBM and also for CoD

enablement and billing information.

򐂰Remote connection to the HMC using Web-based System Manager (WebSM)

or ssh: For accessing the graphical interface, you can use the WebSM

Remote Client running on UNIX® (AIX® or Linux®) or Windows®. The

command line interface is also available by using the secure shell connection

to the HMC. It can be used by an external management system or a partition

to perform HMC operations remotely.

When planning for the HMC installation also consider that the distance between

the HMC and the managed system must be within 8m (26 ft) distance. The

distance complies with IBM maintenance rules.

Partitioning considerations

With POWER5 systems a greater flexibility was introduced in setting up the

resources of a partition by enabling the Advanced Power Virtualization functions

to provide:

򐂰POWER™ Hypervisor: Supports partitioning and dynamic resource

movement across multiple operating system environments.

򐂰Shared processor LPAR (micro-partitioning): Enables you to allocate less

than a full physical processor to a logical partition.

򐂰Virtual LAN: Provides network Virtualization capabilities that allow you to

prioritize traffic on shared networks.

򐂰Virtual I/O (VIO): Provides the ability to dedicate I/O adapters and devices to

a virtual server, thus allowing the on demand allocation and management of

I/O devices.

򐂰Capacity on Demand (CoD): Allows system resources such as processors

and memory to be activated on an as-needed basis.

򐂰Simultaneous multi-threading (SMT): Allows applications to increase overall

resource utilization by virtualizing multiple physical CPUs through the use of

Note: Either eth0 or eth1 can be a DHCP server on the HMC.

6Hardware Management Console (HMC) Case Configuration Study for LPAR Management

multi-threading. SMT is a feature supported only in AIX 5.3 and Linux at an

appropriate level.

򐂰Multiple operating system support: Logical partitioning allows a single server

to run multiple operating system images concurrently. On a POWER5 system

the following operating systems can be installed: AIX 5L™ Version 5.2 ML4 or

later, SUSE Linux Enterprise Server 9 Service Pack 2, Red Hat Enterprise

Linux ES 4 QU1, and i5/OS.

Additional memory allocation in a partitioned environment

Three memory regions are reserved for the physical memory allocation of a

partition:

򐂰Hypervisor

򐂰Translation control entry (TCE) tables

򐂰Partition page tables

At the beginning of a partition size planning, you have to consider that the

allocated amount of memory in these three regions is not usable for the physical

memory allocation of the partition.

Hypervisor and TCE

All POWER5 systems require the use of the hypervisor. The hypervisor supports

many advanced functions including shared processors, Virtual I/O (VIO),

high-speed communications between partitions using Virtual LAN or concurrent

maintenance. There are many variables that dictate how much hypervisor

memory you will need. It is not a fixed amount of memory as with POWER4

systems.

Also the amount of IO drawers and the different ways to use IO, such as shared

environment, affect the amount of memory the hypervisor uses.

Partition page tables

Partition page tables are set aside in additional memory in the hypervisor to

handle the partition’s memory addressing. The amount of memory the partition

page table reserve depends on the maximum value of the partition, and must be

considered in your partition size planning.

Note: The number of VIOs, the number of partitions, and the number of IO

drawers affect the hypervisor memory.

Note: The bigger the maximum value of a partition, the bigger the amount of

memory not usable for the physical memory allocation of the partition.

Hardware Management Console (HMC) Case Configuration Study for LPAR Management 7

To calculate your desired and maximum memory values accurately, we

recommend that you use the LVT tool. This tool is available at:

http://www.ibm.com/servers/eserver/iseries/lpar/systemdesign.htm

Figure 1 shows an example of how you can use the LPAR validation tool to verify

a memory configuration. In Figure 1, there are 4 partitions (P1..P4) defined on a

p595 system with a total amount of 32 GB of memory.

Figure 1 Using LVT to validate the LPAR configuration

8Hardware Management Console (HMC) Case Configuration Study for LPAR Management

The memory allocated to the hypervisor is 1792 MB. When we change the

maximum memory parameter of partition P3 from 4096 MB to 32768 MB, the

memory allocated to the hypervisor increases to 2004 MB as shown in Figure 2.

Figure 2 Memory used by hypervisor

Figure 3 is another example of using LVT when verifying a wrong memory

configuration. Note that the total amount of allocated memory is 30 GB, but the

maximum limits for the partitions require a larger hypervisor memory.

Figure 3 An example of a wrong memory configuration

Hardware Management Console (HMC) Case Configuration Study for LPAR Management 9

Micro-partitioning

With POWER5 systems, increased flexibility is provided for allocating CPU

resources by using micropartitioning features. The following parameters can be

set up on the HMC:

򐂰Dedicated/shared mode, which allows a partition to allocate either a full CPU

or partial units. The minimum CPU allocation unit for a partition is 0.1.

򐂰Minimum, desired, and maximum limits for the number of CPUs allocated to a

dedicated partition.

򐂰Minimum, desired and maximum limits for processor units and virtual

processors, when using the shared processor pool.

򐂰Capped/uncapped and weight (shared processor mode).

Table 4 summarizes the CPU partitioning parameters with their range values,

and indicates if a parameter can be changed dynamically.

Table 4 Partition parameters

Min/Desired/Max values for CPU, processing units, and virtual processors can

be set only in the partition’s profile. Each time the partition is activated, it tries to

acquire the desired values. A partition cannot be activated if at least the

minimum values of the parameters cannot be satisfied.

Parameter Range Dynamic

LPAR

Capped Capped/uncapped Yes

Weight 0-255 Yes

Processing mode Dedicated/shared No

Processors (dedicated

CPUs) Min-Max Processor1Yes

Processing Units (shared

CPUs) Min-Max Processing units1Yes

Virtual processors Min-Max virtual

processors2Yes

1- Max value is limited by the number of CPUs installed in the system,

including CoD.

2- Between 1 and 64; the min and max allowed values are actually

determined by the min/max of processing units: at least 1 processor for

each 1.0 processing units and max value limited to 10*max processing

units or 64.

10 Hardware Management Console (HMC) Case Configuration Study for LPAR Management

Capacity on Demand

The Capacity on Demand (CoD) for POWER5 systems offers multiple options,

including:

򐂰Permanent Capacity on Demand:

– Provides system upgrades by activating processors and/or memory.

– No special contracts and no monitoring are required.

– Purchase agreement is fulfilled using activation keys.

򐂰On/Off Capacity on Demand:

– Enables the temporary use of a requested number of processors or

amount of memory.

– On a registered system, the customer selects the capacity and activates

the resource.

– Capacity can be turned ON and OFF by the customer; usage information

is reported to IBM.

– This option is post-pay. You are charged at activation.

򐂰Reserve Capacity on Demand:

– Used for processors only.

– Prepaid debit temporary agreement, activated using license keys.

– Adds reserve processor capacity to the shared processor pool, used if the

base shared pool capacity is exceeded.

– Requires AIX 5L Version 5.3 and the Advanced POWER Virtualization

feature.

򐂰Trial Capacity on Demand:

– Tests the effects of additional processors and memory.

– Partial or total activation of installed processors and/or memory.

– Resources are available for a fixed time, and must be returned after trial

period.

– No formal commitment required.

Note: Take into consideration that changes in the profile will not get activated

unless you power off and start up your partition. Rebooting of the operating

system is not sufficient.

Table des matières

Autres manuels IBM Matériel informatique

IBM

IBM eserver 7210 Manuel

IBM

IBM PN 10K8798 Manuel utilisateur

IBM

IBM iSeries 5075 Instructions d'utilisation

IBM

IBM BladeCenter Management Module Manuel utilisateur

IBM

IBM 6361 Manuel utilisateur

IBM

IBM M789 Series Manuel utilisateur

IBM

IBM BladeCenter S SAS RAID Controller Module Manuel utilisateur

IBM

IBM A2 Manuel utilisateur

IBM

IBM 4331 Instruction manuelle

IBM

IBM Advanced SerialRAID/X Manuel utilisateur

IBM

IBM Netfinity FASt T500 Manuel de service

IBM

IBM ATA 133 Manuel utilisateur

IBM

IBM WebSphere DataPower 7198 Manuel utilisateur

IBM

IBM 2740-1 Guide de l'utilisateur

IBM

IBM 9332 Manuel utilisateur

IBM

IBM 19K4543 Manuel utilisateur

IBM

IBM WebSphere Business Integration Adapter Manuel utilisateur

IBM

IBM International ISDN Manuel utilisateur

IBM

IBM System x Education M5000 Series Manuel utilisateur

IBM

IBM 55PUS8118 SCSI-2 Manuel utilisateur

IBM

IBM eserver 225 Series Manuel utilisateur

IBM

IBM 9040-MR9 Manuel utilisateur

IBM

IBM N2225 Manuel utilisateur

IBM

IBM LS42 - BladeCenter - 7902 Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur