HunterDouglas Vignette Tiered Manuel utilisateur

Installation •Operation •Care

Vignette®Modern Roman Shades

Tiered™Style Shades

PowerView™Motorization

CONTENTS

Getting Started:

Product View ................................................................ 1

Tools and Fasteners Needed ......................................... 2

Installation:

Installation Overview ..................................................... 3

STEP 1 — Install the Brackets....................................... 3

STEP 2 — Install the Shade .......................................... 8

STEP 3 — Connect the Power Source............................ 9

Attach Magnetic Hold-Down Brackets (Optional)............ 13

Operation:

Testing the Shade ....................................................... 14

Using the PowerView™Remote.................................... 14

Resetting the Shade.................................................... 16

Troubleshooting .......................................................... 17

Care:

Removing the Shade ................................................... 19

Cleaning Procedures ................................................... 19

Child Safety:

Warning ..................................................................... 21

Declarations .............................................................. 22

Warranty.........................................................Back Cover

Questions?

Call the Hunter Douglas Customer Information Center at

1-888-501-8364.

or their respective owners.

GETTING STARTED

Product View

Bottom Rail

Standard

Magnetic

Hold-Down Brackets

(Optional)

End

Cap

Installation Brackets

with Spacer Blocks

Power

Cable

Manual Control

Button

18V Battery Wand

Battery

Wand Clip

Fabric-

Covered

Headrail

Top-Down/Bottom-Up

Middle Rail

Not Shown: Two-on-One Headrail Shade

GETTING STARTED

Thank you for purchasing Hunter Douglas Vignette®Modern Roman Shades with PowerView™

Motorization. With proper installation, operation, and care, your new shades will provide years of

beauty and performance.

Please thoroughly review this instruction booklet and the enclosed packing list before beginning

the installation. For information regarding operation and programming, refer to the guide

included with your remote control.

Tools and Fasteners Needed

■Flat blade and Phillips screwdrivers

■Level (laser level is recommended)

■Measuring tape and pencil

■Power drill,

" drill bit, and

" hex driver

In addition, you will need fasteners designed to work with your speciﬁc mounting surface(s).

■#6 Hex Head Screws (Provided). Two 1

" screws are provided per installation bracket.

■Longer Hex Head Screws (Not Provided). If using spacer blocks, use #6 screws long

enough for a secure attachment.

■Speed Nuts and Screws (Provided). If using extension brackets for additional clearance or

for end mounting your shades, the brackets are provided with screws and speed nuts.

■Drywall Anchors (Not Provided). Use drywall anchors when mounting into drywall.

Speed Nut

and Screw

(Two Provided with

Each Extension Bracket)

#6 x 1

Hex Head Screw

(Provided)

Longer #6 Hex Head Screw

for Use with Spacer Blocks

(Not Provided)

INSTALLATION

Installation Overview

To install your shade, you will need to perform the following three steps:

STEP 1: Install the Brackets

STEP 2: Install the Shade

STEP 3: Connect the Power Source

STEP 1 — Install the Brackets

■The number of installation brackets

required varies with shade width,

as shown in the table.

IMPORTANT: A

" spacer block is required for shades using the battery wand. It is

pre-attached to the back of the installation bracket.

■Should the spacer block become detached, reattach it.

➤Insert the legs of the installation bracket into the tabs

on the spacer block.

➤Rotate the installation bracket back, as shown.

Mounting Types and Window Terminology

If the installation brackets are mounted correctly, the rest of the installation process follows

easily. To prepare for this important ﬁrst step, review the mounting types and basic window

terminology illustrated below.

■Refer to the appropriate page below based on the mounting type chosen for your order:

➤Inside Mount — Page 4

➤Outside Mount — Page 5

➤End Mount — Page 7

TabTab

Outside Mount

Shade mounts outside

window opening.

Inside Mount

Shade ﬁts within

window opening.

Collectively, the sill and

jambs are called the

“window casement.”

Molding

Head Jamb

Sill

Jamb Jamb

Shade Width Brackets

12" – 38" 2

"–72" 3

" – 96" 4

" – 106" 5

INSTALLATION

Mount the Installation Brackets — Inside Mount

■Mark 2" in from each jamb for bracket location.

➤If more than two installation brackets came with your order, space additional bracket(s)

evenly between the two end brackets. Mount into wood whenever possible.

➤With shades using a battery wand, there must be a minimum of 15" between brackets

at the motor end.

■Center the brackets on your marks and mark the location of the screw holes.

➤Allow

" space behind the brackets for

rear fold clearance. (This also provides

battery wand clearance.)

➤With this

" allowance, the minimum

casement depth required to mount the

installation brackets is 1

➤The minimum casement depth to fully

recess the shade is 2

➤Add

" to all of the above dimensions for Vignette®Tiered™Architella®shades.

IMPORTANT: The front edges of the installation brackets must be aligned to eachother.

■Drill the screw holes using a

" drill bit.

CAUTION: Use drywall anchors when mounting into

drywall.

■Use a level to check that the mounting surface is

level. Shim the brackets if necessary.

■Attach the installation brackets using the screws

provided.

Proceed to “STEP 2 — Install the Shade” on page8.

2" Space Evenly

JambJamb

Space Evenly

(15" Minimum for Battery Wand

at Motor End)

2¾" Fully

Recessed

Depth

INSTALLATION

Mount the Installation Brackets — Outside Mount

■Center the headrail over the window opening at the desired height. Use a pencil to lightly

mark the mounting surface at each end of the headrail.

➤Alternatively, measure the width of the headrail and use that width to mark the headrail

end points over the window opening.

■Mark 2" from each end of the headrail.

➤If more than two installation brackets came with your order, space them evenly between

the two end brackets and mark their location. Mount into wood whenever possible.

➤With shades using a battery wand, there must be a minimum of 15" between brackets

at the motor end.

■Center the brackets on your marks, then mark each of the screwholes.

➤A minimum 1" ﬂat vertical surface is required to mount the brackets.

➤The top of the installation brackets or extension brackets should be at the desired shade

height. The brackets should be level and aligned.

➤When using extension brackets, mark two screw holes per bracket.

CAUTION: The rear of the brackets must be ﬂush against a ﬂat mounting surface. Do not

mount brackets oncurved molding.

IMPORTANT: Spacer blocks are recommended for rear fabric fold clearance. Add

for standard Vignette®Tiered™or 1" for Vignette Tiered Architella®. (With shades using a

battery wand, an absolute minimum of

" added clearance is required.) For spacer block

installation, see the following page.

Headrail

End Mark

Headrail

End Mark

Window Opening

2" Space Evenly Space Evenly

(15" Minimum for Battery Wand

at Motor End)

Extension

Bracket

Installation

Bracket

INSTALLATION

■Drill the screw holes using a

" drill bit.

CAUTION: Use drywall anchors when mounting into drywall.

■Attach the installation or extension brackets using the screws provided.

IMPORTANT: The front edges of the brackets must be level and aligned to each other.

■When using spacer blocks: If necessary, ﬁrst attach the installation bracket to a

spacer block as shown on page 3.

➤Additional

" and

" spacer blocks may

be stacked together up to the recommended

maximum of 1

➤Attach the spacer blocks/installation brackets

to a ﬂat vertical mounting surface with

#6mounting screws long enough for asecure

installation.

IMPORTANT: Spacer blocks are recommended

to project the installation brackets away from the

mounting surface for rear fabric fold clearance.

Add

" for standard Vignette®Tiered™or 1"

for Vignette Tiered Architella®. (With shades

using a battery wand, an absolute minimum

" added clearance is required.)

■If using extension brackets, attach an installation

bracket to the underside of each extension bracket

using the provided screws and speed nuts.

Proceed to “STEP 2 — Install the Shade” on page8.

Speed Nut

Screw

Spacer

Blocks

Longer

Screw

INSTALLATION

Mount the Installation Brackets — EndMount

End mount the headrail when conventional mounting techniques will not work — for example,

in an arched window.

■Mount the extension brackets on a surface at least

" wide. Be sure to allow for rear fold clearance,

which also allows for battery wand clearance.

➤The top of the extension brackets should be

at the desired shade height. The extension

brackets on each side must be level and

aligned at the same height.

CAUTION: The rear of the extension brackets must

be ﬂush against a ﬂat mounting surface. Do not

mount the extension brackets onthe curve of the

arch opening.

■Mark two screw holes per bracket.

■Attach the extension brackets using the screwsprovided.

■Attach the installation brackets to the underside of the extension brackets

using the provided screws and speednuts.

CAUTION: Both brackets must be installed at the same depth and height.

Proceed to “STEP 2 — Install the Shade” on page8.

Speed

Nut

Screw

Minimum

INSTALLATION

STEP 2 — Install the Shade

If You Have a Battery Wand Clip...

(For DC power supply or satellite battery pack installations, go to “Mount the Headrail” below.)

■Attach the battery wand clip to the headrail.

IMPORTANT: Position the clip so that the battery wand will be between installation brackets.

A minimum of 15" is needed between the brackets to accommodate the battery wand.

➤Hook the battery wand clip onto the back channel of the headrail.

➤Rotate the clip down until it snaps into place.

CAUTION: Be sure the power cable does not become pinched by the brackets or headrail

during installation; damage or overheating of components couldresult.

CAUTION: Do not connect the battery wand to the power cable prior to installing the shade.

Mount the Headrail

■Peel back the top edge of the protective covering from the top of the headrail.

■Position the shade so that the front faces you.

■Slip the headrail into the installation

brackets so the front of the bracket

slides under the front groove on the

top of theheadrail.

■Gently roll the back of the headrail

up and push back to snap it into the

bracket. You will hear a click when

the headrail snaps securely in place.

IMPORTANT: To avoid damage to the fabric, make sure the fabric is not caught between

the headrail and the installation bracket.

■Completely remove the protective covering from theheadrail.

Proceed to “STEP 3 — Connect the Power Source” on page9.

Headrail

Bracket

Front of

Headrail

Battery Wand Clip

Table des matières

Autres manuels HunterDouglas Store vénitien

HunterDouglas

HunterDouglas Reveal with MagnaView Manuel d'utilisation

HunterDouglas

HunterDouglas Standard Hardware System Manuel de la liste des pièces

HunterDouglas

HunterDouglas VS 100 Guide rail Guide de maintenance et de service

HunterDouglas

HunterDouglas Standard Cordlock, Moveable Slat Specialty... Guide de l'utilisateur

HunterDouglas

HunterDouglas Silhouette Nantucket PowerView Gen 3... Manuel de la liste des pièces

HunterDouglas

HunterDouglas RB 500 Guide de sécurité

HunterDouglas

HunterDouglas Sonnette Manuel de la liste des pièces

HunterDouglas

HunterDouglas PowerView Manuel utilisateur

HunterDouglas

HunterDouglas Solera Soft Shades Manuel utilisateur

HunterDouglas

HunterDouglas Nantucket EasyRise Manuel d'utilisation

HunterDouglas

HunterDouglas Luxaflex PowerView Manuel utilisateur

HunterDouglas

HunterDouglas Duette Manuel utilisateur

HunterDouglas

HunterDouglas ZIP 100 Guide de maintenance et de service

HunterDouglas

HunterDouglas RB 500 Guide de sécurité

HunterDouglas

HunterDouglas Provenance Woven Wood Shades Manuel de la liste des pièces

HunterDouglas

HunterDouglas Alustra Woven Textures ST30 Manuel de la liste des pièces

HunterDouglas

HunterDouglas EverWood Guide de l'utilisateur

HunterDouglas

HunterDouglas LiteRise Manuel d'utilisation

HunterDouglas

HunterDouglas Cadence Soft Vertical Blinds Manuel de la liste des pièces

HunterDouglas

HunterDouglas Silhouette A Deux Manuel de la liste des pièces

HunterDouglas

HunterDouglas LiteRise Manuel utilisateur

HunterDouglas

HunterDouglas RB 500 Manuel utilisateur

HunterDouglas

HunterDouglas PowerView Venetian Blind 18VDC Manuel utilisateur

HunterDouglas

HunterDouglas Designer Roller Shades Manuel de la liste des pièces

Manuels Store vénitien populaires d'autres marques

Jysk

Jysk ROGEN Manuel utilisateur

SOMFY

SOMFY 1241752 Manuel utilisateur

Rollos

Rollos S-Nanorollo V2 Guide de planification

Teptron

Teptron Move Manuel utilisateur

Renson

Renson Outdoor Loggia Guide de sécurité

Project Source

Project Source CDLF2342W Manuel utilisateur

Domondo

Domondo PureNight Manuel d'instructions d'installation

rollease acmeda

rollease acmeda Easy Spring Air Guide de configuration

IKEA

IKEA KADRILJ Manuel utilisateur

Hallis Hudson

Hallis Hudson Rolls Super glide Manuel utilisateur

Benthin

Benthin P1614 Manuel utilisateur

MV LINE

MV LINE CLARA 015 Mode d’emploi

Current

Current E-WAND Mode d’emploi

weinor

weinor VertiTex ZipR Manuel

Roto

Roto ZAR M R4/R7 Manuel utilisateur

SOMFY

SOMFY Movelite WT Series Manuel utilisateur

Acmeda

Acmeda RF400 Series Manuel utilisateur

Motura

Motura Pli_353/3 Manuel utilisateur