HunterDouglas RB 500 Guide de sécurité

Standard+ Clutch with 5.875" Dual Bracket

Manual Clutch Installation

Mount into wood or metal studs or into concrete with concrete anchors.

Drywall anchors are not recommended.

Determine the mounting location.

a) surface/wall b) ceiling c) in recess/end mount

Measure and mark the bracket locations with a pencil.

Mount brackets with the screws provided. Pre-drilling is recommended.

Check that the brackets are level and aligned.

5.875” DUAL BRACKET WITH STANDARD

Las Vegas • Chicago

800.229.5300

HDhospitality.com

1 of 3

Insert the provided Allen key into the set screw

of the leveler.

Adjust skewing by turning the Allen key left or

right to move the shade up or down. Support

the shade with your hand if necessary.

All adjustments can be made after the shade

has been installed and after the operation has

been tested.

OPTIONAL: INTEGRATED LEVELER

ADJUST LEVELER

TOOLS NEEDED

INSTALLING THE BRACKETS

Pencil Level

Measuring

Tape Drill with

bits

Allen Key

(provided with

optional Leveler)

Screwdriver Pliers

Ensure the leveling set screw

opening is pointing downwards

before installing the bracket.

The orientation can be changed

by loosening the two screws

(M3x6) and turning the leveler

90°. Fix the screws after turning.

112119

LOCK THE SHADE

2 of 3

INSTALLING THE SHADE - Do not remove the tape around the shade until it is fully installed

CHECK SHADE

OPERATION

Las Vegas • Chicago

800.229.5300

HDhospitality.com

CLUTCH BRACKET IDLE BRACKET

UNLOCKED

CORD TENSIONER

INSTALLATION

BALL STOP

INSTALLATION

LOCKED

Remove the tape from the shade.

Make sure the shade operates properly.

Pull the front chain down to raise the shade.

Pull the back chain down to lower the shade.

Adjust leveler if applicable.

SET LOWER LIMIT

Lower shade to the bottom of the window opening.

Place a ball stop over the chain in front of the clutch

and secure using pliers.

SET UPPER LIMIT

Raise shade to the desired height.

Place a ball stop over the chain in back of the clutch

and secure using pliers.

Be sure the cord tensioner is not placed in the path of the bottom

rail and fabric.

Unlock the cord tensioner by removing the plug from the screw hole

and pushing down.

Hold the cord tensioner ﬁrmly in place and check that the bead chain,

ball stop, and chain connector can move freely through it. The chain

should not be taught.

Mark the screw hole with a pencil. Attach the cord tensioner directly

to the wall using a 1½” screw. Use a wall anchor if necessary.

Standard+ Clutch with 5.875" Dual Bracket

Manual Clutch Installation

Place the clutch onto the clutch bracket.

Push the shade against the clutch end and

lift the roller shade up until the end plug ﬁts

into the center of the idle bracket.

Rotate the nut on the

idle end clockwise until

it meets the tube. This

locks the shade into

position.

Move the shade

downward and out

of the clutch bracket.

Rotate the nut

on the idle end

counterclockwise

to unlock the shade.

Slide a ﬂat head

screwdriver between

the idle end plug and

bracket and push

towards the clutch

end to remove the

plug from the bracket.

3 of 3

SHADE REMOVAL

UNLOCK THE SHADE REMOVE IDLE END REMOVE CLUTCH END

Las Vegas • Chicago

800.229.5300

HDhospitality.com

Standard+ Clutch with 5.875" Dual Bracket

Manual Clutch Installation

Autres manuels pour RB 500

Ce manuel convient aux modèles suivants

Autres manuels HunterDouglas Store vénitien

HunterDouglas

HunterDouglas PowerView EOS Plisse Manuel utilisateur

HunterDouglas

HunterDouglas Duette Honeycomb Shades Manuel utilisateur

HunterDouglas

HunterDouglas Sonnette Manuel de la liste des pièces

HunterDouglas

HunterDouglas 5-151 Manuel utilisateur

HunterDouglas

HunterDouglas Design Studio Manuel d'installation

HunterDouglas

HunterDouglas ZIP 100 Guide de maintenance et de service

HunterDouglas

HunterDouglas Reveal with MagnaView Manuel d'utilisation

HunterDouglas

HunterDouglas RB 500 Guide de sécurité

HunterDouglas

HunterDouglas PowerView Manuel utilisateur

HunterDouglas

HunterDouglas 5-216 Manuel utilisateur

HunterDouglas

HunterDouglas Designer Roller Shades Manuel de la liste des pièces

HunterDouglas

HunterDouglas PowerView Venetian Blind 18VDC Manuel utilisateur

HunterDouglas

HunterDouglas LiteRise Manuel d'utilisation

HunterDouglas

HunterDouglas PowerView Gen 3 Manuel utilisateur

HunterDouglas

HunterDouglas Decor Standard Cordlock Manuel du propriétaire

HunterDouglas

HunterDouglas LiteRise Manuel de la liste des pièces

HunterDouglas

HunterDouglas EverWood Guide de l'utilisateur

HunterDouglas

HunterDouglas Alustra Woven Textures ST30 Manuel de la liste des pièces

HunterDouglas

HunterDouglas Duette Manuel de la liste des pièces

HunterDouglas

HunterDouglas Cadence Soft Vertical Blinds Manuel de la liste des pièces

HunterDouglas

HunterDouglas WOODMATES Manuel utilisateur

HunterDouglas

HunterDouglas Standard Cordlock, Moveable Slat Specialty... Guide de l'utilisateur

HunterDouglas

HunterDouglas Duolite Shades Manuel de la liste des pièces

HunterDouglas

HunterDouglas Silhouette Manuel de la liste des pièces

Manuels Store vénitien populaires d'autres marques

Jysk

Jysk ROGEN Manuel utilisateur

SOMFY

SOMFY 1241752 Manuel utilisateur

Rollos

Rollos S-Nanorollo V2 Guide de planification

Teptron

Teptron Move Manuel utilisateur

Renson

Renson Outdoor Loggia Guide de sécurité

Project Source

Project Source CDLF2342W Manuel utilisateur

Domondo

Domondo PureNight Manuel d'instructions d'installation

rollease acmeda

rollease acmeda Easy Spring Air Guide de configuration

IKEA

IKEA KADRILJ Manuel utilisateur

Hallis Hudson

Hallis Hudson Rolls Super glide Manuel utilisateur

Benthin

Benthin P1614 Manuel utilisateur

MV LINE

MV LINE CLARA 015 Mode d’emploi

Current

Current E-WAND Mode d’emploi

weinor

weinor VertiTex ZipR Manuel

Roto

Roto ZAR M R4/R7 Manuel utilisateur

SOMFY

SOMFY Movelite WT Series Manuel utilisateur

Acmeda

Acmeda RF400 Series Manuel utilisateur

Motura

Motura Pli_353/3 Manuel utilisateur