Huawei B2338-168ODU Manuel utilisateur

LTE Outdoor CPE B2338-168

(Package includes B2338-168ODU & B2338-168IDU)

V100R001C00

Quick Start Guide

Issue

Draft A

Date

2016-10-18

HUAWEI TECHNOLOGIES CO., LTD.

Issue Draft A (2016-10-18)

Huawei Proprietary and Confidential

No part of this document may be reproduced or transmitted in any form or by any means without prior

written consent of Huawei Technologies Co., Ltd.

Trademarks and Permissions

and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd.

All other trademarks and trade names mentioned in this document are the property of their respective

holders.

Notice

The purchased products, services and features are stipulated by the contract made between Huawei and

the customer. All or part of the products, services and features described in this document may not be

within the purchase scope or the usage scope. Unless otherwise specified in the contract, all statements,

information, and recommendations in this document are provided "AS IS" without warranties, guarantees or

representations of any kind, either express or implied.

The information in this document is subject to change without notice. Every effort has been made in the

preparation of this document to ensure accuracy of the contents, but all statements, information, and

recommendations in this document do not constitute a warranty of any kind, express or implied.

Huawei Technologies Co., Ltd.

Address:

Huawei Industrial Base

Bantian, Longgang

Shenzhen 518129

People's Republic of China

Website:

http://www.huawei.com

Email:

[email protected]

LTE CPE B2338-168

Quick Start Guide

About This Document

Issue Draft A (2016-10-18)

Huawei Proprietary and Confidential

About This Document

Change History

Changes between document issues are cumulative.

The latest document issue contains all the changes made in earlier issues.

Draft A (2016-10-18)

This issue is the first release.

LTE CPE B2338-168

Quick Start Guide

Contents

Issue Draft A (2016-10-18)

Huawei Proprietary and Confidential

iii

Contents

About This Document.................................................................................................................... ii

1 What You Need..............................................................................................................................1

2 ODU and IDU Panels...................................................................................................................2

2.1 ODU Panel....................................................................................................................................................................2

2.2 IDU Rear Panel.............................................................................................................................................................3

2.3 IDU Front Panel............................................................................................................................................................4

3 Installation......................................................................................................................................6

3.1 Select a Location...........................................................................................................................................................6

3.2 Mounting the Device ....................................................................................................................................................6

4 Connect to the Internet...............................................................................................................10

4.1 Login in the web GUI.................................................................................................................................................10

4.2 Operation in the web GUI...........................................................................................................................................11

5 Europe - EU Declaration of Conformity ..............................................錯誤! 尚未定義書籤。

LTE CPE B2338-168

Quick Start Guide

1 What You Need

Issue Draft A (2016-10-18)

Huawei Proprietary and Confidential

1 What You Need

LTE Outdoor CPE

LTE IDU Device

Quick Start Guide

Mount Kit: Washer*2, Metal

Strap*2, Bracket

One ground cable and one

RJ-45 cable for connecting IDU

and computer

Power Adapter & Power

Plug

CAT5 Outdoor Shielded

Patch Ethernet cable for

connecting IDU and ODU

(not included in the

package)

LTE CPE B2338-168

Quick Start Guide

2 ODU and IDU Panels

Issue Draft A (2016-10-18)

Huawei Proprietary and Confidential

2 ODU and IDU Panels

2.1 ODU Panel

1. One SIM card slot for inserting SIM card.

2. One RJ-45 connector for connecting to the IDU POE port.

3. LED indicator inside.

4. A grounding screw on the rear panel.

ODU LED Indicators as the following table.

LED

name

Location

Color

LED Behavior

Status Indication

LED list

Main

Power

Blue

Power On

Blinking

Factory Reset

OFF

Power Off

LTE CPE B2338-168

Quick Start Guide

2 ODU and IDU Panels

Issue Draft A (2016-10-18)

Huawei Proprietary and Confidential

LED

name

Location

Color

LED Behavior

Status Indication

Ethernet

Status

Yellow

Steady ON

Ethernet connected

Blinking

Upgrading

OFF

No Ethernet action

SIM

status

Green

Steady ON

SIM Detected

Blinking when

On-hook

PUK / PIN Code

OFF

No SIM Detected

4G Status LED : Link

Status

When CPE is power on, each LED indicates each link

status

4G-Signal

Blue

Chasing light

Searching

Blue

Blinking

Network Entry

4G-1

Blue

Steady ON

SINR < 0dB

4G-2

Blue

Steady ON

0dB ≤ SINR < 4dB

4G-3

Blue

Steady ON

4dB ≤ SINR < 9dB

4G-4

Blue

Steady ON

9dB ≤ SINR < 16dB

4G-5

Blue

Steady ON

16dB ≤ SINR

2.2 IDU Rear Panel

LTE CPE B2338-168

Quick Start Guide

2 ODU and IDU Panels

Issue Draft A (2016-10-18)

Huawei Proprietary and Confidential

1. Phone: Connect your telephone to indoor device with an RJ-11 telephone cable.

2. WPS button: Enable the user to configure WiFi security on WPS-enabled devices.

3. LAN ports: Connect PC, Hub, switch or other network equipment by using RJ-45

Ethernet cable.

4. PoE port: Connect with ODU RJ-45 connector.

5. Reset button: To reboot the device, press and hold the reset button less than 5 seconds.

To reset the device to factory defaults, press and hold the reset button more than 5

seconds.

6. Power switch: Power on or power off.

7. Power port: Connect the power adapter.

2.3 IDU Front Panel

IDU LED Indicators as the following table.

No.

LED name

Color

LED Behavior

Status Indication

Main Power

Green

Power On

Off

Power Off

System

Green

System is connected

Blinking

System is upgrading

Off

System is disconnected

LTE SIGNAL

STRENGTH

Green

Display signal Strength

1 LED: SINR< 0dB

2 LEDs: 0dB ≤ SINR < 4dB

3 LEDs: 4dB ≤ SINR < 9dB

LTE CPE B2338-168

Quick Start Guide

2 ODU and IDU Panels

Issue Draft A (2016-10-18)

Huawei Proprietary and Confidential

No.

LED name

Color

LED Behavior

Status Indication

4 LEDs: 9dB ≤ SINR< 16dB

5 LEDs: 16dB ≤ SINR

Off

No signal

Chasing light

Searching

Blinking

Network Entry

LAN 1 & 2

Green

Blinking

Ethernet connected

Off

No Ethernet connected

Green

Enable 2.4G WiFi

Blinking

Data Transmission

Off

Disable 2.4G WiFi

Green

Enable 5G WiFi

Blinking

Data transmition

Off

Disable 5G WiFi

Phone 1 & 2

Green

Registered

Blinking

Busy

Off

De-registered

LTE CPE B2338-168

Quick Start Guide

3 Installation

Issue Draft A (2016-10-18)

Huawei Proprietary and Confidential

3 Installation

Before installing the ODU, please verify that you have all the items listed in 1 What You Need.

If any of the items is missing or damaged, please contact your LTE service provider.

3.1 Select a Location.

The ODU should be pole-mounted outdoors and aligned so its antenna faces the nearest LTE

base station. When selecting a suitable location for the unit, consider these guidelines:

1. When choosing a location to install the ODU, please note that the ODU's front panel

should point towards your service provider's nearest base station.

You do not need to be able to see the base station from the ODU's position. However, if

you experience the difficulties with signal reception, a Line of Slight (LoS) connection

may have better result.

2. Place the ODU away from power and telephone lines.

3. Avoid placing the ODU nearby any metallic reflective surfaces.

4. Be sure to ground the ODU with an appropriate grounding wire by attaching it to the

grounding screw on the unit and to a good ground connection.

3.2 Mounting the Device

Step 1 Preparation.

1. SIM card is inserted in the SIM slot by following the direction mark.

2. Make sure the grounding screw on the rear panel.

3. Connect a Grounding cable between the ground terminal of the ODU (marked ) and a

ground connection. (Suggest to with Ethernet lighting protector between Ethernet cable

and indoor PoE supplier for better lighting and surge protection).

4. For additional lightning protection, it is recommended to use a lightning arrestor

immediately before the Ethernet cable enters the building.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Huawei Point d'accès sans fil

Huawei

Huawei AP6010DN-AGN Manuel utilisateur

Huawei

Huawei AP8130DN Caractéristiques techniques

Huawei

Huawei HES-319M Manuel utilisateur

Huawei

Huawei R250D-E Manuel d'utilisation

Huawei

Huawei OptiXstar P602E Manuel utilisateur

Huawei

Huawei PT530 Manuel utilisateur

Huawei

Huawei eA660 Series Manuel utilisateur

Huawei

Huawei WA635SN-GN Manuel utilisateur

Huawei

Huawei RTN510 Manuel utilisateur

Huawei

Huawei AP8030DN Caractéristiques techniques

Huawei

Huawei Quidway WA1003A Manuel utilisateur

Huawei

Huawei WA603DE Manuel utilisateur

Huawei

Huawei eA660 Series Manuel utilisateur

Huawei

Huawei OptiXstar P812E Manuel utilisateur

Huawei

Huawei E5730 Manuel utilisateur

Huawei

Huawei R230D Caractéristiques techniques

Huawei

Huawei AP7050DE Caractéristiques techniques

Huawei

Huawei MA5833 Manuel utilisateur

Huawei

Huawei B818-263 Caractéristiques techniques

Huawei

Huawei Quidway WA1003A Manuel utilisateur

Huawei

Huawei OptiXstar P622E Manuel utilisateur

Huawei

Huawei Quidway NE40E Mode d’emploi

Huawei

Huawei E5573S Manuel utilisateur

Huawei

Huawei AP4030DN Manuel utilisateur

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur