Huawei HW-TX-5000 Manuel utilisateur

HUAWEI TECHNOLOGIES CO., LTD.

HW-TX-5000 Autotransformer

Quick Guide

Issue: 01

Date: 2018-06-29

1Overview

2Installation

(1) Cover

(2) Ventilation valve

(3) Mounting bracket

(4) Heat sink

(5) Hanging kit

(6) AC input power cable gland (INPUT, 3/4 in.)

(7) AC output power cable gland (OUTPUT, 3/4 in.)

1. Plan the installation clearances of the autotransformer.

Clearances Angle

Mounting Hole Dimensions

2. Install the mounting bracket (using the frame post as an example).

•Prepare the tightening screws according to the load-bearing structure. This document introduces

how to install the autotransformer on a wall as an example. The installation method on a support

is the same as the installation method on a frame post. Prepare M6 stainless bolt assemblies

(including flat washers, spring washers, and M6 bolts) with appropriate lengths as well as

matched flat washers and nuts based on the support specifications.

•Secure the mounting bracket using either of the following hole combining methods: 1. line

combination (1, 2, and 4); 2. staggered combination (1, 3, and 5).

•The autotransformer weighs about 13 kg.

Load

Bearing

Structure

Frame

post

Brick wall/Fiber

-cement

composite panel

Plywood

Tightening

Screw

M6 tapping

screw

M6 expansion bolt

M6 expansion

anchor screw

Screw

Quantity

3 PCS

Screw

Appearance

Frame post Level Wall panel

NOTICE

3Cable Connections

Preparing for Installation

3.1

•Connect cables in accordance with the local installation laws and regulations.

•Do not install cables with power on.

Cable

Type

Conductor Cross

Sectional Area

Range

Source

AC input

power cable

•

Use cables that can withstand 90°C (194°F) or

105°C (221°F).

•

Two single-core outdoor copper cables (L1, L2)

L1, L2: 10

–6 AWG

Purchase

d by the

customer

AC output

power cable

•

Use cables that can withstand 90°C (194°F) or

105°C (221°F).

•

Four single-

core outdoor copper cables (L1, N, L2,

and PE)

L1, N, and L2:

–6 AWG

PE: 8 AWG

Purchase

d by the

customer

Component

Description

Source

switch

Recommended: a 2

-pole AC circuit breaker with a rated voltage greater

than or equal to 240 V AC and a rated current of:

•

25 A (SUN2000-3.8KTL/5KTL/7.6KTL-USL0)

•

30 A (SUN2000-9KTL/10KTL/11.4KTL-USL0)

Purchase

d by the

customer

NOTICE

3. Install the autotransformer on the

mounting bracket. 4. Tighten the screws.

The specifications of the pipes should comply with those of the cable glands. For example, for a 3/4 in.

waterproof block, a 3/4 in. pipe is recommended. The pipe appearance shown in the following figure is

for reference only. The actual pipes prevail.

Nut Conduit

Fitting

Preparing Threading Pipes

3.2

Threading Pipe Cable Hole Diameter at the Enclosure Bottom

•Do not open the cover in rainy or snowy days. If you have to, take protective measures to

prevent rain or snow from entering the Autotransformer compartment.

•Do not leave unused screws in the Autotransformer compartment.

NOTICE

Installing the AC Input Power Cable

3.4

Removing the Cover and PE Cable

3.3

Installing the AC Output Power Cable

3.5

•When connecting the cable, ensure that the exposed core wire is totally inserted into the cable hole

and connected securely. Failing to do so maycause the autotransformer malfunction and damage.

•In the following figure, 1.0 mm x 5.5 mm (0.04 in. x 0.22 in.) indicates the thickness and width of

the screwdriver blade.

NOTICE

4Installing the PE Cable and Cover

•Before closing the cover, check that the cables are correctly and securely connected. Then

take proper measures to ensure that the pipe conduits and fittings are reliably secured. Seal

cable holes to ensure that the cover and sealing washer are intact and free from any foreign

objects. Clean the foreign objects in the maintenance compartment if there is any.

•If the screws on the enclosure door are lost, obtain the spare screws from the fitting bag.

NOTICE

Huawei Technologies Co., Ltd.

Huawei Industrial Base, Bantian, Longgang

Shenzhen 518129 People's Republic of China

www.huawei.com

Table des matières

Autres manuels Huawei Matériel réseau

Huawei

Huawei R209-Z Manuel utilisateur

Huawei

Huawei FTK01 Manuel utilisateur

Huawei

Huawei HG8245W5 Manuel utilisateur

Huawei

Huawei RT-FIC-1T1-V2 Manuel utilisateur

Huawei

Huawei ME01-BSUA Manuel utilisateur

Huawei

Huawei OptiX PTN 3900 Manuel utilisateur

Huawei

Huawei EN83CTLA Manuel utilisateur

Huawei

Huawei SUN2000-M3 Manuel utilisateur

Huawei

Huawei RRU3832 Manuel utilisateur

Huawei

Huawei CR-P4CF Manuel utilisateur

Huawei

Huawei EchoLife HS8245W1 Manuel utilisateur

Huawei

Huawei IdeaShare Key Manuel utilisateur

Huawei

Huawei RRU3908 V1 Manuel utilisateur

Huawei

Huawei SMU11B Manuel utilisateur

Huawei

Huawei USG6000E Series Manuel utilisateur

Huawei

Huawei ST5110 Manuel utilisateur

Huawei

Huawei NE-HIC-2xFE Manuel utilisateur

Huawei

Huawei CR52-LPUF-20 Manuel utilisateur

Huawei

Huawei CR52-10GE Manuel utilisateur

Huawei

Huawei RT-8LS Manuel utilisateur

Huawei

Huawei ME60 Series Mode d’emploi

Huawei

Huawei LSBM1P4G8B0 Manuel utilisateur

Huawei

Huawei LSBM1SRP Manuel utilisateur

Huawei

Huawei RRU3804 Manuel utilisateur

Manuels Matériel réseau populaires d'autres marques

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manuel utilisateur

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manuel utilisateur

Yudor

Yudor YDS-16 Manuel utilisateur

D-Link

D-Link ShareCenter DNS-320L Manuel utilisateur

Samsung

Samsung ES1642dc Instructions d'utilisation

Honeywell Home

Honeywell Home LTEM-PV Instructions de montage

evertz

evertz 7700 Series Manuel utilisateur

D-Link

D-Link ShareCenter DNS-343 Manuel utilisateur

Asante

Asante AsanteBridge 1012 Manuel utilisateur

FireBrick

FireBrick FB2700 Manuel utilisateur

Audiovox Electronics

Audiovox Electronics ARWH2T Manuel utilisateur

ADC

ADC DSX-1 Manuel

NetComm

NetComm NF2 Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 5620 Manuel utilisateur

Dell EMC

Dell EMC XC6420 Series Manuel utilisateur

Lanner

Lanner NCA-1020A Manuel utilisateur

Allied Telesis

Allied Telesis AT-TN121-A Manuel utilisateur

Arista

Arista CCA-ETM-Q12 Manuel utilisateur