HP Aruba AP-377 Instructions de montage

EL-MF877-00

Template Revision A

Page 1

Product End-of-Life Disassembly Instructions

Product Category: Networking Equipment

Marketing Name / Model

[List multiple models if applicable.]

AP-377

Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions

for the disassembly of HP products to remove components and materials requiring selective treatment, as defined by EU

directive 2002/96/EC, Waste Electrical and Electronic Equipment (WEEE).

1.1 Items listed below are classified as requiring selective treatment.

1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as

applicable.

Item Description

Notes

Quantity

of items

included

in product

Printed Circuit Boards (PCB) or Printed Circuit

Assemblies (PCA)

With a surface greater than 10 sq cm

1 in product, 1 in power adapter

Batteries

All types including standard alkaline and lithium

coin or button style batteries 0

Mercury-containing components

For example, mercury in lamps, display backlights,

scanner lamps, switches, batteries 0

Liquid Crystal Displays (LCD) with a surface

greater than 100 sq cm

Includes background illuminated displays with gas

discharge lamps

Cathode Ray Tubes (CRT)

Capacitors / condensers (Containing PCB/PCT)

Electrolytic Capacitors / Condensers measuring

greater than 2.5 cm in diameter or height

External electrical cables and cords

Gas Discharge Lamps

Plastics containing Brominated Flame Retardants

Components and parts containing toner and ink,

including liquids, semi-liquids (gel/paste) and toner

Include the cartridges, print heads, tubes, vent

chambers, and service stations.

Components and waste containing asbestos

Components, parts and materials containing

refractory ceramic fibers

Components, parts and materials containing

radioactive substances

1.0 Items Requiring Selective Treatment

EL-MF877-00

Template Revision A

Page 2

List the type and size of the tools that would typically be used to disassemble the product to a point where

components and materials requiring selective treatment can be removed.

Tool Description

Tool Size (if

applicable)

Torx screwdriver

T10/T20/T25

Cross-head screwdriver

Description #3

Description #4

Description #5

3.0 Product Disassembly Process

3.1 List the basic steps that should typically be followed to remove components and materials requiring selective

treatment:

1. Use T25 screwdriver to remove the 4 screws on the chassis

2. Use Cross-head screwdriver to remove the 3 screws on the TOP

3. Use T25 screwdriver to remove the 6 screws on the bottom

4. Remove the antenna cable from PCBA.

5. Use Cross-head screwdriver to remove screws on the PCBA and AC

Module. 6.

3.2 Graphic.

AP-377

1．Use T25 screwdriver to remove the 4 screws on the holder

2. Use T25 screwdriver to remove the 6 screws on the Top Cover

2.0 Tools Required

EL-MF877-00

Template Revision A

Page 3

EL-MF877-00

Template Revision A

Page 4

3. Use Cross-head screwdriver to remove 4 screws on the antenna cover

Then use special fixture to support to push out antenna lock carefully.

4. Cross-head screwdriver to remove 10 screws on the PCBA and AC Module

EL-MF877-00

Template Revision A

Page 5

AP-318

1. Use T10 screw drive to remove 8 screws on the holder and shielding cover.

2. Use T20 screw drive to remove 6pcs screws on Bottom Cover

EL-MF877-00

Template Revision A

Page 6

Use Cross-head screwdriver to remove 6 screws on the PCBA, then use special fixture to support to push out

antenna lock carefully.

Table des matières

Autres manuels HP Point d'accès sans fil

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur