HP Aruba AP-587 Instructions d'installation

MF877-00 Page 1

Template Revision C, 30-July-2018

HPE instructions for this template are available at MF877-01

Product End-of-Life Disassembly Instructions

Product Category

: Networking

Marketing Name / Model

[List multiple models if applicable.]

Aruba AP-587 Unified AP

Purpose: The document is intended for use by end-of-life recyclers or treatment facilities. It provides the basic instructions

for the disassembly of HPE products to remove components and materials requiring selective treatment, as defined by

Directive 2012/19/EU of the European Parliament and of the Council on Waste Electrical and Electronic Equipment

(WEEE).

1.0 Items Requiring Selective Treatment

1.1 Items listed below are classified as requiring selective treatment.

1.2 Enter the quantity of items contained within the product which require selective treatment in the right column, as

applicable.

Item Description Notes

Quantity

of items

included

in product

Printed Circuit Boards (PCB) or Printed Circuit

Assemblies (PCA)

With a surface greater than 10 sq cm

Batteries

All types including standard alkaline and lithium

coin or button style batteries

Mercury-containing components

For example, mercury in lamps, display backlights,

scanner lamps, switches, batteries

Liquid Crystal Displays (LCD) with a surface

greater than 100 sq cm

Includes background illuminated displays with gas

discharge lamps

Cathode Ray Tubes (CRT)

Capacitors / condensers (Containing PCB/PCT)

1134

Electrolytic Capacitors / Condensers measuring

greater than 2.5 cm in diameter or height

External electrical cables and cords

5 (AP587)

Gas Discharge Lamps

Plastics containing Brominated Flame Retardants

weighing > 25 grams (not including PCBs or PCAs

already listed as a separate item above)

Components and parts containing toner and ink,

including liquids, semi-liquids (gel/paste) and toner

Include the cartridges, print heads, tubes, vent

chambers, and service stations.

MF877-00 Page 2

Template Revision C, 30-July-2018

HPE instructions for this template are available at MF877-01

Item Description Notes

Quantity

of items

included

in product

Components and waste containing asbestos

Components, parts and materials containing

refractory ceramic fibers

Components, parts and materials containing

radioactive substances

2.0 Tools Required

List the type and size of the tools that would typically be used to disassemble the product to a point where components

and materials requiring selective treatment can be removed.

Tool Description

Tool Size (if

applicable)

Description #1 Tamper Resistant Torx screwdriver

T25

Description #2 Tamper Resistant Torx screwdriver

Description #3 Phillips Screwdriver

PH2

3.0 Product Disassembly Process

3.1 List the basic steps that should typically be followed to remove components and materials requiring selective treatment:

1. Remove accessories.

2. Remove four M5 screws by using T25 Tamper Resistant Torx screwdriver from holder, then remove the holder.

3. Remove eight M5 screws by using T25 Tamper Resistant Torx screwdriver, then remove the Top Cover.

4. Remove five M3 screws by using PH2 Phillips Screwdriver.

5. Remove six Antenna cables from the Antenna Plate by hand, then remove it (include O-ring).

6. Remove ten M3 screws by using PH2 Phillips screwdriver.

7. Remove PSU connector from the PCBA by hand ,then remove the PCBA.

8. Remove five M3 and one M4 screws by using PH2 Phillips screwdriver, then remove the PSU.

9. Remove the air vent.

10. Remove four M3 screws by using T8 Tamper Resistant Torx screwdriver, then remove the GPS Cover.

3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify the items

contained in the product that require selective treatment (with descriptions and arrows identifying locations).

MF877-00 Page 3

Template Revision C, 30-July-2018

HPE instructions for this template are available at MF877-01

1. Remove accessories.

2. Remove four M5 screws by using T25 Tamper Resistant Torx screwdriver from holder, then remove the holder.

3. Remove eight M5 screws by using T25 Tamper Resistant Torx screwdriver, then remove the Top Cover.

4. Remove five M3 screws by using PH2 Phillips Screwdriver.

MF877-00 Page 4

Template Revision C, 30-July-2018

HPE instructions for this template are available at MF877-01

5. Remove six Antenna cables from the Antenna Plate by hand, then remove it (include O-ring).

6. Remove ten M3 screws by using PH2 Phillips screwdriver.

7. Remove PSU connector from the PCBA by hand, then remove the PCBA.

8. Remove five M3 and one M4 screws by using PH2 Phillips screwdriver, then remove the PSU.

MF877-00 Page 5

Template Revision C, 30-July-2018

HPE instructions for this template are available at MF877-01

9. Remove the air vent.

10. Remove four M3 screws by using T8 Tamper Resistant Torx screwdriver, then remove the GPS Cover.

Table des matières

Autres manuels HP Point d'accès sans fil

Manuels Point d'accès sans fil populaires d'autres marques

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Manuel utilisateur

Ubiquiti

Ubiquiti NanoStation NSM2 Manuel utilisateur

Cisco

Cisco Aironet 1550 Series Manuel utilisateur

Aruba

Aruba IAP-335 Manuel utilisateur

Advantek Networks

Advantek Networks AWN-AP-54MR Manuel utilisateur

IP-COM

IP-COM AP355 Manuel utilisateur

Buffalo

Buffalo AirStation WLA-L11G Manuel utilisateur

EnGenius

EnGenius EnStationACv2 Manuel utilisateur

D-Link

D-Link DAP-3662 Manuel utilisateur

xG Technology

xG Technology xMax CN1300 Manuel utilisateur

Widelink

Widelink ezWave WAP-1100 Series Manuel utilisateur

Edimax

Edimax CAP1200 Manuel utilisateur

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Manuel utilisateur

Aruba

Aruba AP-203R Manuel utilisateur

LuXout Shades

LuXout Shades LUXSHADE MOTION Manuel utilisateur

CreatComm

CreatComm TB5F Manuel utilisateur

SineDigital

SineDigital MW-1500AP(H) Manuel utilisateur

TP-Link

TP-Link AP9650 V1 Manuel utilisateur