HP Surestore Disk Array 12h - And FC60 Manuel utilisateur

hp surestore disk array xp operating

system configuration guide

SGI IRIX

Notice

Order number A5951-90907

E1100 A5951-96071

Hewlett-Packard Company makes no warranty of any kind with

regard to this material, including, but not limited to, the implied

warranties of merchantability and fitness for a particular purpose.

Hewlett-Packard shall not be liable for errors contained herein or

for incidental or consequential damages in connection with the

furnishing, performance, or use of this material.

This document contains proprietary information, which is

protected by copyright. No part of this document may be

photocopied, reproduced, or translated into another language

without the prior written consent of Hewlett-Packard. The

information contained in this document is subject to change

without notice.

Warranty

If you have any questions about the warranty for this product,

contact your dealer or local HP sales representative.

Trademarks

Windows NT, Microsoft, Windows, MS Windows, and MS-DOS

are U.S. registered trademarks of Microsoft Corporation.

Other reserved names are trademarks of the respective

companies.

Safety notices

Any servicing, adjustment, maintenance, or repair must be

performed only by authorized service-trained personnel.

Caution Denotes a hazard that can cause

hardware or software damage.

WARNING Denotes a hazard that can cause personal

injury or death.

Format conventions

literal Indicates values discussed in text, such

as commands, file names, directory

names, paths, output, or returned values.

variable Indicates that you must supply a value.

output Denotes text displayed on the screen.

CONTENTS

About This Manual 5

Revision History 6

Updates 7

1 SGI IRIX Installation 9

Hardware Installation 9

Remote Console PC and LUN Configuration Manager Installation 10

Preparing for Disk Array Device Configuration 11

Installation Requirements 12

Connectivity Options 12

Device Types 13

Installation Procedures 14

Identify the Available SCSI Paths (XP256 Only) 15

Prepare the Disk Array 16

Setting the Host Mode for the Disk Array Ports 16

Configuring the Disk Array Fibre Channel Ports 16

Define the SCSI Paths (XP256 Only) 19

Connect the Disk Array 20

Verify New Device Recognition 21

Create the Device Files 23

Partition and Label the Devices 26

Enable Command Tag Queuing 29

Create the File Systems 31

Create and Verify the Mount Directories 32

2 Troubleshooting 35

Calling the HP Support Center 36

A SCSI Path Worksheet 37

B Disk Parameters 39

SCSI TID Map for Fibre Channel Adapters 47

Byte Information Table 49

Queue Depth Parameters Table 50

Parameter Tables for OPEN-K/3/8/9/E Devices 51

Physical Partition Size Table 57

4hp surestore disk array xp operating system configuration guide: SGI IRIX

Host Bus Adapter Modes 59

C Supported Host Modes 61

D Failover and SNMP Remote Disk Array Management 63

Failover Configuration 64

SNMP Configuration 65

Glossary 67

Index 77

About This Manual

This manual describes the requirements and procedures for connecting the XP family

of disk arrays to an SGI system, and configuring the new disk array for operation with

the SGI IRIX operating system.

Installation of the HP Surestore Disk Array XP is performed by users with

administrator privileges and the HP service representative. The HP service

representative performs the physical installation of the disk array and formats the disk

devices. The user configures the system for the new devices with assistance as needed

from the HP service representative.

The HP account representative can assist in determining the supported configurations

for your system.

6hp surestore disk array xp operating system configuration guide: SGI IRIX

Revision History

5 May 1999 First release.

1 November 2000 Added Fibre Channel support.

July 2001 Updated.

Updates

For the most current information about HP Surestore XP products, visit the support

web site:

www.hp.com/support/stressfree

For information about product availability, configuration, and connectivity, consult

your HP account representative.

8hp surestore disk array xp operating system configuration guide: SGI IRIX

SGI IRIX INSTALLATION

The disk array comes with all hardware and cabling required for installation.

Installation of the disk array includes these activities:

• hardware installation

• remote console and LUN Configuration Manager installation

Hardware Installation

The HP service representative performs hardware installation as specified in the disk

array maintenance manual. Follow all precautions and procedures in the disk array

maintenance manual. Check all specifications to ensure proper installation and

configuration. Hardware installation involves several tasks:

1. Assemble all hardware and cabling.

2. Load the latest microcode and service processor (SVP) updates for full Fibre

Channel support.

3. Install and format the logical devices (LDEVs) using the SVP.

Make sure to get the desired LDEV configuration information from the user,

including the desired number of OPEN-K/3/8/9/E, CVS, LUSE, and

multiplatform (Data Exchange) devices.

Caution The SGI IRIX system can only recognize up to 32 LUs (per port). Make sure to

determine the number of disk array LUs based on this restriction.

4. Install the Fibre Channel adapters and cabling.

The total Fibre Channel cable length attached to each Fibre Channel adapter must

not exceed 500 meters (1,640 feet). Do not connect any open fibre control (OFC)

type connector to the disk array. Do not connect or disconnect Fibre Channel

cabling that is being actively used for I/O. This can cause the SGI IRIX system to

hang. Always confirm that the devices on the Fibre Channel cable are offline

before connecting or disconnecting the cable.

10 hp surestore disk array xp operating system configuration guide: SGI IRIX

Fabric

Connect the disk array port to the F-port of the fabric switch. Connect the host adapter

to the FL-port of the fabric switch.

Disk Array FC Port

The Fibre Channel topology parameters for each disk array Fibre Channel port depend

on the type of device to which the disk array port is connected. Determine the topology

parameters supported by the device, and set your topology accordingly. The type of

disk array port is also important. See “Configuring the Disk Array Fibre Channel

Ports” (page 16).

Remote Console PC and LUN Configuration Manager Installation

The user or HP service representative can install the remote console PC and HP

Surestore LUN Configuration Manager XP. You will use the LUN Configuration

Manager software on the remote console PC to set the host modes for the disk array

ports and configure the Fibre Channel ports. For instructions on installing the LUN

Configuration Manager software, see the product manual:

HP Surestore LUN Configuration Manager XP: User’s Guide

If the LUN Configuration Manager software is not installed, the HP service

representative can use the SVP of the disk array to configure Fibre Channel ports.

Please contact your HP account team for further information on Fibre Channel

configuration services.

Autres manuels pour Surestore Disk Array 12h - And FC60

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels HP Stockage

HP StorageWorks 1000 - Modular Smart Array Manuel d'utilisation et d'entretien

HP Colorado Trakker 250 Mode d’emploi

HP StoreAll 9730 Manuel de service

HP StoreEver MSL2024 Instructions d'utilisation

HP Compaq Presario,Presario 4400 Mode d’emploi

HP StorageWorks 1/16 Tape SuperLoader Manuel utilisateur

HP P9000 Manuel utilisateur

HP StoreOnce B6000 Manuel utilisateur

HP StoreVirtual P4000 G2 Manuel de service

HP S700 Pro 2.5 Manuel utilisateur

HP Surestore Disk Array 12h - And FC60 Manuel utilisateur

HP StorageWorks MSL2024 Manuel

HP StorageWorks 2300 - Disk System Manuel utilisateur

HP StorageWorks EML E Series Manuel utilisateur

HP AU183AA - 2TB Personal Media Drive Manuel d'utilisation et d'entretien

HP StorageWorks 2000fc Mode d’emploi

HP StorageWorks P4000 Series Mode d’emploi

HP 705 Guide de démarrage rapide

HP Surestore Tape Library Model 3/30 Manuel

HP StoreAll Series Manuel utilisateur

HP P6080-63001 - Maxtor DiamondMax Plus 40 GB Hard... Manuel utilisateur

HP StorageWorks 8B - FC Entry Switch Manuel utilisateur

HP High-Performance Secure Hard Disk Manuel utilisateur

HP StorageWorks MSL6000 series Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur

Dell

Dell PowerVault MD3600f Series Manuel utilisateur

CFI

CFI TERA STOR SATA RAID IV Manuel utilisateur