HP 705 Guide de démarrage rapide

For:cote

Printed on:Mon, Feb 3, 1997 12:58:44

Document:a1658-90692

Last saved on:Mon, Feb 3, 1997 12:48:23

You will not be able to load HP-UX 9.03 on a standalone, newly

installed

2–GB drive. To install HP–UX 9.03 on 2–GB drives, you

must use a netdist install server.

You must install patch PHSS_5776 on the netdist install server to

recognize 2-GB drives for both HP-UX 9.03 and 9.05.

After you have loaded HP-UX onto the either the 2–GB or 4–GB

drive, you must load patch PHCO_7461 for disktab and sam func-

tionality.

Install the patches using /etc/update.

To load HP-UX 9.05 onto a newly installed standalone 2–GB drive,

prior to loading the patches, perform the following steps:

1. Begin the HP-UX software installation process. The follow-

ing message appears:

“Note: the destination disk type

“

disk–drive–model–number

” was not found in

the disk table /etc/disktab.

(Press any key to continue.)”

2. Press any key. The screen displays the following message:

“If model number: “

disk–drive–model–number

”,

is incorrect, and a correct one (one that

has an entry in the /etc/disktab) is known,

please enter it now otherwise press return.”

3. Press: <Return> (or <Enter>)

The screen displays a message about using default parameters.

4. Press any key.

5. Let the software installation process complete.

The software patches may be obtained from HP Customer Service.

INSTRUCTIONS FOR HP-UX 9.X

After you have loaded HP–UX onto the new drive, install the

appropriate patches using swinstall and reboot the system.

INSTRUCTIONS FOR HP-UX 10.X

2- and 4-GB (Fast-Wide-Differential)

Disk Drive User Notes

Refer to your workstation owner’s guide or your disk drive installation

guide for detailed information about installing your disk drive. During

the installation procedure, you may have to change the SCSI ID of your

disk drive. Refer to the appropriate illustration to set the SCSI ID

jumpers to the desired SCSI ID.

NOTICE: We recommend that you use SCSI ID 6 for your

workstation’s first hard disk drive, and SCSI ID

5 for the second hard disk drive.

  

The 2-GB disk drive is fully operational with HP-UX Release 9.03 and

later on Series 700 binary–compatible systems.

The 4-GB disk drive is fully operational with HP-UX Release 10.01 and

later on Series 700 binary–compatible systems, and at HP-UX Releases

9.05 and 9.07, this drive may be used as a non-bootable device.

Patches are required to most operating systems. Please see the following

table and the patch instructions on the last page of this document.

HP-UX

Version Patches

– OS

Patches – Diags

9.03 (2–GB) PHCO_7461, PHSS_5776 PHSS_7587

9.05 PHCO_7461, PHSS_5776(2–GB) PHSS_7587

9.07 N/A PHSS_7587

10.01 PHKL_8904, PHKL_8329 PHSS_7583

10.10 PHKL_8906 PHSS_7585

10.20 PHKL_8908 PHSS_7929

Part Number A1658–90692

Edition E1296

Printed in U.S.A.



CAUTION

NOT

plugs for J2 on J6.

ou will damage the

internal contacts

use the jumper

SCSI

Highest

Priority

Lowest

Priority

Term Power From Drive

Seagate ST32171WD and ST34371WD Disk Drive Jumpers

SCSI

Highest

Priority

Lowest

Priority

Spin

on power up

Quantum – Atlas II – XP32181WD and XP34361WD Disk Drive Jumpers

The HP part numbers for the 2–GB drives are A1658–60010 (spare) and A1658–69010 (exchange).

The HP part numbers for the 4–GB drives are A1658–60011 (spare) and A1658–69011 (exchange).

Autres manuels pour 705

Ce manuel convient aux modèles suivants

Autres manuels HP Stockage

HP Surestore Disk Array 12h - And FC60 Manuel d'exploitation et d'entretien

HP StorageWorks XP10000 - Disk Array Manuel utilisateur

HP LeftHand P4000 - SAN Solutions Supplément

HP P9000 Manuel utilisateur

HP HPE Alletra 6010 Instructions d'installation

HP Designjet 220 Instructions d'utilisation

HP Smart Array P600 Manuel utilisateur

HP Surestore 6164 - Switch Manuel utilisateur

HP Xw4600 - Workstation - 2 GB RAM Manuel utilisateur

HP 705 Guide de démarrage rapide

HP StorageWorks 1/8 Manuel utilisateur

HP StorageWorks 1/8 G2 Manuel utilisateur

HP StorageWorks RDX160 Instructions d'utilisation

HP P9000 Manuel utilisateur

HP HPE StoreEasy 1000 Manuel utilisateur

HP P-FD8GBX2-V125W-FS - v125w 8 GB USB 2.0 Flash... Manuel de référence

HP XP20000/XP24000 Manuel utilisateur

HP SureStore DAT40e Manuel utilisateur

HP StorageWorks 8000 - NAS Manuel utilisateur

HP SureStore 4115w Manuel utilisateur

HP Storevirtual 4000 Manuel utilisateur

HP STORAGEWORKS ALL-IN-ONE STORAGE SYSTEM Manuel utilisateur

HP Surestore 160ex - Optical Jukebox Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur

Dell

Dell PowerVault MD3600f Series Manuel utilisateur

CFI

CFI TERA STOR SATA RAID IV Manuel utilisateur