HP Pavilion p6000 - Desktop PC Mode d’emploi

Autres manuels pour Pavilion p6000 - Desktop PC

8

Ce manuel convient aux modèles suivants

1

Table des matières

Autres manuels HP Stockage

HP

HP A2W75-67905 Manuel utilisateur

HP

HP StorageWorks XP10000 - Disk Array Manuel utilisateur

HP

HP StoreOnce 4900 Backup Manuel de l'opérateur

HP

HP StorageWorks 7110 - Virtual Array Manuel utilisateur

HP

HP P9000 Manuel utilisateur

HP

HP P9000 Mode d’emploi

HP

HP P9000 Mode d’emploi

HP

HP D2D Mode d’emploi

HP

HP C5644A - SureStore Travan T4i Tape Drive Manuel utilisateur

HP

HP SureStore 4115w Manuel utilisateur

HP

HP Xw6600 - Workstation - 2 GB RAM Manuel utilisateur

HP

HP StorageWorks MSL6000 series Instructions d'utilisation

HP

HP SAS Manuel utilisateur

HP

HP 201723-B21 - HP StorageWorks Modular SAN Array 1000 Hard... Mode d’emploi

HP

HP StorageWorks XP10000 - Disk Array Manuel utilisateur

HP

HP 3PAR StoreServ 7200 2-node Manuel utilisateur

HP

HP StorageWorks 1900ux Manuel utilisateur

HP

HP StorageWorks XP12000 Manuel utilisateur

HP

HP C7745NB - SureStore DLT Tape Autoloader 1/9 Manuel utilisateur

HP

HP StorageWorks All-in-One SB600c - Storage... Manuel utilisateur

HP

HP Surestore 6164 - Switch Manuel utilisateur

HP

HP StorageWorks 8000 - NAS Manuel utilisateur

HP

HP Ultrium 232e Manuel utilisateur

HP

HP Surestore 64 - Director Switch Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur

Dell

Dell PowerVault MD3600f Series Manuel utilisateur

CFI

CFI TERA STOR SATA RAID IV Manuel utilisateur

HP P6500 EVA Controller

Y-cable Replacement Instructions

© Copyright 2011 Hewlett-Packard Development Company, L.P.

First edition: May 2011

The information in this document is subject to change without notice.

Printed in Puerto Rico

www.hp.com

*593098-001*

About this document

For the latest documentation, go to http://www.hp.com/support/

manuals, and select your product.

The information contained herein is subject to change without notice.

The only warranties for HP products and services are set forth in the

express warranty statements accompanying such products and services.

Nothing herein should be construed as constituting an additional

warranty. HP shall not be liable for technical or editorial errors or

omissions contained herein.

WARRANTY INFORMATION

To obtain a copy of the warranty for this product, see the warranty

information website: http://www.hp.com/go/storagewarranty

Before you begin

Observe the following precautions when replacing the Y-cable:

•Ensure that the array is either operational and stable on the redundant

path for the device ports being serviced or the array has been shut

down.

•Label the replacement cable before installing it. See Labeling the re-

placement Y-cable.

NOTE:

The Y-cable is replaced as part of the troubleshooting process

to address a communication failure.

Labeling the replacement Y-cable

Before you remove the cable, label the replacement cable with the port

numbers using the label kit that shipped with the cable. Four sheets of

labels (two red and two green) contain all the port numbers you need.

Label the new cable to match the port labels on the original cable.

The replacement cable should resemble Figure 1.

Page 1

2. Port number label

1. Pull tab (may also be a release

bar)

Figure 1 Y-cable

.

Replacing a Y-cable

To ensure the replacement cable is configured the same as the original

cable, HP recommends that you replace one end at a time.

1. Remove the end of the cable that is connected to the controller port

(DP-A or DP-B) (P0 in Figure 1).

NOTE:

The cable release may be either a pull tab or a release

bar.

2. Insert the new cable head into the controller port (DP-A or DP-B).

3. Remove the end of the cable that is connected to the disk enclosure

port (P1 or P2) (cable head P1 (DP 1) in Figure 1.)

4. Insert the new cable end into the disk enclosure port (P1 or P2).

5. Remove the end of the cable that is connected to the second port

(cable head P2 (DP 2) in Figure 1.)

6. Insert the new cable end into the disk enclosure port (P1 or P2).

Verifying proper operation

Use HP P6000 Command View to verify that the device ports are

enabled.

Page 2