Honeywell SmartEye Transmitter Manuel utilisateur

7157 602 EN1B-0003UK07 0402

SmartEye

Transmitter

Installation Instructions

Contents

EN1B-0003UK07 0402

Contents

Contents 1

Overview 2

Mounting 4

Glossary 13

Technical data 14

Troubleshooting 15

Overview

For your information

Technical terms are identified by an * and are explained in the

glossary.

Application

− The SmartEye Transmitter is part of the SmartEye System* for

wireless temperature monitoring applications.

− It is a stand-alone battery operated device that measures the

temperature of a wired temperature probe e.g. in a food mobile

casecabinet.

− It sends the temperature & digital input* information to a

SmartEye Receiver* within the building.

− It monitors the state of a digital input that can be used for

applications e.g. defrost inhibit to prevent over-temperature

alarms during defrost cycle.

− SmartEye Transmitters should not be confused with Hometronic

HB30 weathersensor range.

The measured data* is transferred by radio to the SmartEye

Receiver*. This data is used by the rest of the SmartEye system* to

log temperature.

Overview

EN1B-0003UK07 0402

Delivery Includes

(1) SmartEye Transmitter

(2) Mounting bracket

(3) 2 battery cells AA 1.5V,

type LR6 (mignon)

e.g. Energiser LR6 or

Energizer HI Energy Lithium

(longer life span)

(4) Temperature probe cable

assembly. (Not shown)

(5) TP002K temperature probe.

(Not shown)

Mounting

Safety instructions

Caution!

The SmartEye Transmitter has a radio transmitter

whose function can be impaired by metallic objects or

radio devices.

- When selecting the mounting site, ensure that there is

sufficient distance to metallic objects and radio

devices.

- Select a different mounting site if radio interference

occurs.

Information on mounting the SmartEye Transmitter

Best results are achieved when all devices are mounted at a height

where clear RF paths are uninhibited by metal objects.

When selecting the mounting site, ensure that:

− Avoid metal objects directly in the path between SmartEye

Transmitter and the SmartEye Receiver.

− Transmitters and Receivers mounted at height will have RF

communication less impaired by floor objects.

Mounting

EN1B-0003UK07 0402

- Mount Transmitter with the back plate facing away from Receiver.

- Mount Receiver vertically i.e. antenna pointing up or down

− Mount Transmitter so that it is easily accessible for Teach-In* and

batterychange

Information on temperature sensor & digital input

Temperature Sensor

Only the approved Temperature sensor (TP002K) may be used. A

non-approved Temperature sensor will result in incorrect

temperature readings.

Digital Input

Refer to installation guide of SmartEye Genus Interface for

configuration of Digital Input. If configured as defrost inhibit, connect

the Digital Input to NO contacts of a relay activated during the

defrost cycle. This will prevent over-temperature alarms during

defrost.

The Digital Input and Common Ground (refer to page 8) must be

wired to voltage-free relay contacts. Closed contacts activate the

input. If the input is left unterminated it will default to a clear state.

Mounting

Therefore, if the digital input is not required, it can be left

unterminated.

Teach-In Button

Accessing the Teach-In button requires the removal of the battery

lid. This button is located next to the cable assembly socket and is

used during the Teach-In process in the commissioning stage of the

system.

Mounting the SmartEye Transmitter

1. Securing the mounting bracket

The metallic mounting bracket snaps onto the back of the

Transmitter.

When mounting the unit, ensure that the horizontal screw

hole of the mounting bracket is positioned at the top.

Mounting

EN1B-0003UK07 0402

- Select a suitable mounting site.

- Use suitable fasteners to secure the mounting

bracket firmly to the mounting surface.

2. Battery Insertion

- Remove the SmartEye Transmitter

from the mounting bracket.

- Open the battery compartment:

–Press in the battery lid.

–Pull up the housing frame.

–Remove the battery lid.

- Remove the used battery cells, if

necessary.

- Dispose of used battery cells in conformance with the local

statutoryrequirements.

Battery cells should not be disposed of in the household

waste.

You may be required by local law to dispose of used battery

Mounting

You may be required by local law to dispose of used battery

cells in a certain manner.

Always replace both battery cells.

Only use 1.5 V AA type LR6(mignon) cells e.g. Energizer LR6

or Energizer HI Energy Lithium (longer life span)

- Insert the battery cells into the battery compartment. Ensure that

the polarity is correct!

- Close the battery compartment and insert the Transmitter into the

mounting bracket.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Honeywell Émetteur

Honeywell

Honeywell ST 800 Series Mode d’emploi

Honeywell

Honeywell ADEMCO 5817 Instructions de montage

Honeywell

Honeywell SmartLine STIW400 Manuel utilisateur

Honeywell

Honeywell XNX Manuel utilisateur

Honeywell

Honeywell 5834 Instructions de montage

Honeywell

Honeywell Satellite XT Manuel utilisateur

Honeywell

Honeywell OELD Manuel utilisateur

Honeywell

Honeywell Midas-M Manuel utilisateur

Honeywell

Honeywell NOTIFIER AFL-RM Manuel utilisateur

Honeywell

Honeywell ZR530 Manuel utilisateur

Honeywell

Honeywell SmartLine Manuel utilisateur

Honeywell

Honeywell 5814 - Ademco Ultra-small Wireless... Manuel utilisateur

Honeywell

Honeywell ADEMCO 5805-6 Instructions de montage

Honeywell

Honeywell 5834-4EN Manuel utilisateur

Honeywell

Honeywell 5800Micra - Single Door/window Transmitter Manuel utilisateur

Honeywell

Honeywell KEGS5000 Manuel utilisateur

Honeywell

Honeywell oneWireless XYR 6000 Manuel utilisateur

Honeywell

Honeywell XNX Manuel utilisateur

Honeywell

Honeywell 5802mn2 - Ademco Wireless Panic Manuel utilisateur

Honeywell

Honeywell 5878 - Wireless Wall Transmitter Manuel utilisateur

Honeywell

Honeywell ADEMCO 5878 Instructions de montage

Honeywell

Honeywell ST 800 Series Manuel utilisateur

Honeywell

Honeywell PEHA FU-BLS Manuel utilisateur

Honeywell

Honeywell STT850 SMARTLINE Manuel utilisateur

Manuels Émetteur populaires d'autres marques

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuel du propriétaire

Kamstrup

Kamstrup READy MTU Mode d'emploi

Omega

Omega ZW Series Manuel utilisateur

ABB

ABB Field 264H Mode d’emploi

Alinco

Alinco DJ-V17T Manuel utilisateur

Dejero

Dejero EnGo 3x Manuel utilisateur

Rosemount

Rosemount 4600 Manuel utilisateur

Speaka Professional

Speaka Professional 2342740 Manuel utilisateur

trubomat

trubomat GAB 1000 Manuel utilisateur

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuel utilisateur

Rondish

Rondish UT-11 Manuel utilisateur

MG 10JRE Manuel utilisateur

Burkert

Burkert 8177 Manuel utilisateur

Firetide

Firetide HotPort 3203 Manuel

Tele Radio

Tele Radio T9-02 Manuel utilisateur

Rotronic

Rotronic HygroFlex HF3 Series Manuel utilisateur

Jamara

Jamara FCX6 Pro Tel Manuel utilisateur

Excalibur

Excalibur SoundMaster FM Transmitter 144 Manuel utilisateur