Honeywell Dolphin 75e Manuel utilisateur
Dolphin™ 75e
powered by Android 4.4
Quick Start Guide
75E-AND-ENUS-QS Rev C
9/15
Out of the Box
Verify that your carton contains the following items:
• Dolphin 75e handheld computer (terminal)
• 1GB, 2GB, or 4GB industrial grade microSD™ card (optional)
• Rechargeable 3.7V Li-ion battery
• USB charge/communication cable
• Power adapter with regional plug adapters
• Product documentation
If you ordered accessories for your terminal, verify that they are also included
with the order. Be sure to keep the original packaging in case you need to
return the Dolphin terminal for service.
Memory Card Specifications
Honeywell recommends the use of Single Level Cell (SLC) industrial grade
microSD or microSDHC™ memory cards with Dolphin terminals for maxi-
mum performance and durability. Contact a Honeywell sales representative
for additional information on qualified memory card options.
Getting to Know the Dolphin 75e
Right Scan/
Image Button
USB Door/
Micro USB
Port
Recent Apps
Button
Menu Button Home Button
Back Button
Scan Status
Notification LED
Front Speaker
Touch Panel
Display
Battery Charging Status and
General Notification LED
Front
Microphone
Scan Button
Bottom Speaker
Camera Flash/Flashlight
Color Camera
Lens
I/O Connector
Battery Door
(standard model shown)
Volume Control Button
Left Scan/Image Button
Power Button
Audio Jack
Image Engine Window (LED aperture)
Battery
Door Lock
Memory Card Socket
Memory Card Retention Flap
Battery Latch
(battery and battery door not shown)
Installing the Battery
Dolphin 75e models are designed for use with battery part numbers
BAT-STANDARD-02 (Li-ion 3.7 V, 6.179 watt hour) and BAT-EXTENDED-02
(Li-ion 3.7 V, 12.358 watt hour), manufactured for Honeywell International
Inc.
The Dolphin 75e is shipped with the battery packaged separately from the
terminal. Perform the steps illustrated below to install the battery.
Ensure all components are dry prior to placing the battery in the
terminal. Mating wet components may cause damage not covered by
the warranty.
We recommend use of Honeywell Li-ion battery packs. Use of any non-
Honeywell battery may result in damage not covered by the warranty.
3
4
6
1
5
Note: Standard model battery
and battery door shown.
2
Apply pressure to the
edges of the battery door
before engaging the lock
to ensure the door is
properly closed.
Charging the Dolphin 75e
Dolphin terminals ship with the battery significantly discharged of power.
Charge the battery with a Dolphin charging device for a minimum of 4 hours
for the standard battery or 6 hours for the extended battery. When using
the 70e-USB Charge/Communication cable to charge from a 500mA USB
port on a host device, charge the battery for a minimum of 6 hours for the
standard battery or 8 hours for the extended battery.
Note: Using the terminal while charging the battery significantly increases the
time required to reach a full charge.
We recommend use of Honeywell peripherals, power cables, and power
adapters. Use of any non-Honeywell peripherals, cables, or power
adapters may cause damage not covered by the warranty.
Dolphin 75e model terminals are designed for use with the following charging
devices and cables: 70e-HB, 70e-EHB, 70e-CB, 70e-NB, 70e-MB, 70e-MC,
and the 70e-USB ADAPTERKIT.
Ensure all components are dry prior to mating terminals/batteries with
peripheral devices. Mating wet components may cause damage not
covered by the warranty.
HomeBase (Model 70e-HB)
The 70e-HB charger is designed for use with Dolphin 75e model terminals,
and battery part numbers BAT-STANDARD-02 (Li-ion 3.7V, 6.179 watt hour)
and BAT-EXTENDED-02 (Li-ion 3.7V, 12.358 watt hour), manufactured for
Honeywell International Inc.
Use only a UL Listed power supply, which has been qualified by Honeywell
with output rated at 12VDC and 3 amps with the device.
HomeBase Parts
HomeBase LED Indicators
AUX battery LED
Orange The auxiliary battery is charging.
Green The auxiliary battery has completed charging and is ready
for use.
Dock LED
Blue The terminal is properly seated in the base.
COMM LED
Green A USB connection is established with the host workstation.
2
AUX Battery Well
AUX
Battery LED
COMM LED
Dock LED
AC Power Cord
USB Port
DC Power
Jack
Power Adapter
Power Cable
USB Charge/Communication Cable (70e-USB ADAPTERKIT)
The USB Charge/Communication cable provides two options for charging
the terminal. Use the cable in conjunction with the provided power supply
adapter and plug adapter to charge the terminal from a power outlet or
connect the cable to a high-power USB port to charge from a host device.
Option 1: Charging from a power outlet
Use only a UL Listed power supply, which has been qualified by Honeywell
with an output rated at 5VDC and 1A with the device.
Option 2: Charging from a USB port on a host device
Note: Charging the battery through a USB port takes more time than direct
AC adapter charging. USB charging will not take place if the terminal is
drawing more current than supplied by the USB port. Refer to the user’s
guide for additional information.
Touch All Apps > Settings > Battery to verify the battery is
charging.
Power
Adapter
Micro USB Port
USB Door
Plug Adapter 70e-USB Charge/
Communication Cable
Micro USB
Port
USB
Door
Host Device
USB Port
70e-USB Charge/
Communication Cable
Turning Power On/Off
To turn the terminal On, press and release the Power button .
To turn the terminal Off:
1. Press and hold the Power button until the options menu displays.
2. Touch Power Off.
Note: You should always power off the terminal before removing the battery.
Sleep Mode (Suspend Mode)
Sleep mode automatically turns the touch panel display off and locks the
terminal to save battery power when the terminal is inactive for a
programmed period of time.
1. Press and release the Power button to wake the terminal.
2. Drag the toward the edge of the display or press the Menu button
to unlock the terminal.
To adjust the time out limit, touch All Apps > Settings > Display >
Sleep.
Turning Airplane Mode On/Off
1. Press and hold the Power button until the options menu displays.
2. Touch Airplane Mode to toggle the mode On or Off.
Note: When Airplane Mode is turned on, shows on the status bar.
Removing the Battery
1. Power Off the terminal.
2. Perform the steps illustrated below to remove the battery.
Installing the Memory Card
Note: Format microSD/SDHC card before initial use.
1. Power Off the terminal.
2. Unlock and remove the
battery door.
3. Pull the battery latch back
and remove the battery.
4. Lift the card retention flap.
5. Slide the card (contacts facing
down) into the socket, and
then close the retention flap.
6. Install the battery and
battery door, and then
engage the lock.
7. Press the Power button .
1
2
5
4
3
Autres manuels pour Dolphin 75e
10
Table des matières
Autres manuels Honeywell portable
Honeywell
Honeywell HX2 Manuel utilisateur
Honeywell
Honeywell 9900LUP-6211G0 - Hand Held Products Dolphin... Manuel utilisateur
Honeywell
Honeywell DOLPHIN 6500 Manuel utilisateur
Honeywell
Honeywell 8680i Series Manuel utilisateur
Honeywell
Honeywell HX3 Manuel utilisateur
Honeywell
Honeywell MX9 Manuel utilisateur
Honeywell
Honeywell Dolphin 70e Black Manuel utilisateur
Honeywell
Honeywell DOLPHIN 6500 Manuel de référence
Honeywell
Honeywell CK75LAN Manuel utilisateur
Honeywell
Honeywell Dolphin 9900 Manuel utilisateur
Honeywell
Honeywell Dolphin 70e Black Manuel utilisateur
Honeywell
Honeywell Dolphin 7850 Manuel utilisateur
Honeywell
Honeywell CT50 Manuel utilisateur
Honeywell
Honeywell Dolphin CH80 Manuel utilisateur
Honeywell
Honeywell ScanPal EDA51 Manuel utilisateur
Honeywell
Honeywell 7600BP-112-B6EE - Hand Held Products Dolphin... Manuel utilisateur
Honeywell
Honeywell 7600BP-112-B6EE - Hand Held Products Dolphin... Manuel utilisateur
Honeywell
Honeywell Dolphin 60s Manuel utilisateur
Honeywell
Honeywell DOLPHIN 6500 Manuel utilisateur
Honeywell
Honeywell Dolphin 60s Manuel utilisateur
