Hitachi CP-S235 Manuel utilisateur

In this section, the technical information about this projector is described.

• The information in this manual is subject to change without notice.

• The manufacturer assumes no responsibility for any errors that may appear in this manual.

• The reproduction, transmission or use of this document or contents is not permitted without

express written authority.

RADEMARK ACKNOWLEDGEMENT :

• VGA and XGA are registered trademarks of the International Business Machines Corporation.

• Apple and Mac are registered trademarks of Apple Computer, Inc.

• VESA and SVGA are trademarks of the Video Electronics Standard Association.

• Windows is a registered trademark of Microsoft Corporation.

All other trademarks are the property of their respective owners.

NOTE

WARNING Before using, read the "User's Manual - Safety Guide" and these

manuals to ensure correct usage through understanding. After reading, store

them in a safe place for future reference.

TECHNICAL

Projector

CP-S235

User's Manual - Operating Guide

16CP-S235TECHNICAl03.12.228:48AMページ1

Port Specification

RGB IN

RGB OUT

Video signal: RGB separate, Analog, 0.7 Vp-p, 75 Ωterminator (positive)

H/V. sync. signal:TTL level (positive/negative)

Composite sync. signal: TTL level

D-sub 15-pin shrink jack

AUDIO IN

(interlocked port)

200 mVrms, 50 kΩ(max. 3.0 Vp-p), Stereo mini jack

AUDIO OUT

0~200 mVrms, 1 kΩ(Stereo mini jack)

CONTROL

3D-sub 9-pin plug

VIDEO

41.0 Vp-p, 75 Ωterminator, RCA jack

AUDIO L, R

(interlocked

//)

200 mVrms, 50 kΩor more (max. 3.0 Vp-p), RCA jack

COMPONENT VIDEO

Y, CB/PB,

CR/PR

Y signal: 1.0 Vp-p, 75 Ωterminator

CB/PBsignal: 0.7 Vp-p, 75 Ωterminator

CR/PRsignal: 0.7 Vp-p, 75 Ωterminator

S-VIDEO

Mini Din 4-pin jack

USB

USB jack (B type)

Signal Connectors

L-AUDIO-R

VIDEO

S-VIDEO IN

AUDIO OUT

AUDIO IN Y

COMPONENT VIDEO

CB/PBCR/PR

RGB IN

CONTROL

RGB OUT

USB

456

789

11 12 13 14 15

9876

12345

6789

54321

No. Signal No. Signal No. Signal

1 - 4 - 7 RTS

2RD 5Ground 8CTS

3TD 6 - 9 -

No. Signal

1Color signal: 0.286 Vp-p (NTSC, burst), 75 Ωterminator

Color signal: 0.300 Vp-p (PAL/SECAM, burst), 75 Ωterminator

2Brightness signal: 1.0 Vp-p, 75 Ωterminator

3Ground

4Ground

No. Signal

1+ 5V

2- DATA

3+ DATA

4Ground

TECHNICAL

16CP-S235TECHNICAl03.12.228:48AMページ2

No. Signal No. Signal No. Signal

1 Video input Red 7 Ground Green 12 RGB IN: SDA(DAC)

RGB OUT: -

2 Video input Green 8 Ground Blue

13 H. sync./Composite

sync.

3 Video input Blue 9 Ground

14 Vertical sync

4 - 10 -

RGB IN:SCL (DDC)

5 Ground 11 - 15 RGB OUT: -

6 Ground Red 12 SDA (DDC)

Example Of Computer Signal

Resolution

H ××VfH (kHz) fV (Hz) Rating Signal mode Display

mode

720 ×400 37.9 85.0 VESA TEXT Zoom in

640 ×480 31.5 59.9 VESA VGA (60Hz) Zoom in

640 ×480 35.0 66.7 Mac13"mode Zoom in

640 ×480 37.9 72.8 VESA VGA (72Hz) Zoom in

640 ×480 37.5 75.0 VESA VGA (75Hz) Zoom in

640 ×480 43.3 85.0 VESA VGA (85Hz) Zoom in

800 ×600 35.2 56.3 VESA SVGA (56Hz)

800 ×600 37.9 60.3 VESA SVGA (60Hz)

800 ×600 48.1 72.2 VESA SVGA (72Hz)

800 ×600 46.9 75.0 VESA SVGA (75Hz)

800 ×600 53.7 85.1 VESA SVGA (85Hz)

832 ×624 49.7 74.5 Mac16"mode Zoom out

1024 ×768 48.4 60.0 VESA XGA (60Hz) Zoom out

1024 ×768 56.5 70.1 VESA XGA (70Hz) Zoom out

1024 ×768 60.0 75.0 VESA XGA (75Hz) Zoom out

1024 ×768 68.7 85.0 VESA XGA (85Hz) Zoom out

1152 ×864 67.5 75.0 VESA SXGA (75Hz) Zoom out

1280 ×960 60.0 60.0 VESA SXGA (60Hz) Zoom out

1280 ×1024 64.0 60.0 VESA SXGA (60Hz) Zoom out

1280 ×1024 80.0 75.0 VESA SXGA (75Hz) Zoom out

1280 ×1024 91.2 85.0 VESA SXGA (85Hz) Zoom out

1600 ×1200 75.0 60.0 VESA UXGA (60Hz) Zoom out

•Some computers may have multiple display screen modes. Use of some of these

modes will not be possible with this projector.

•Be sure to check jack type, signal level, timing and resolution before connecting this projector to a

computer.

•Depending on the input signal, full-size display may not be possible in some cases. Refer to the

number of display pixels above.

•Although the projector can display signals with resolution up to UXGA (1,600 x 1,200), the signal will

be converted to the projector’s panel resolution before being displayed. The best display

performance will be achieved if the resolutions of the input signal and projector panel are identical.

•The image may not be displayed correctly when the input sync. signal is “Composite Sync.” or

“Sync. on G”.

•Automatically adjustment may not function correctly with some input signals.

•When the image resolution is changed on a computer, depending on an input, automatic adjust

function may take some time and may not be completed. In this case, you may not be able to see a

check box to select “Yes/No” for the new resolution on Windows. Then the resolution will go back to

the original. It might be recommended to use other CRT or TFT monitors to change the resolution.

NOTE

16CP-S235TECHNICAl03.12.228:48AMページ3

Initial Set Signals

The following signals are used for the initial settings.

The signal timing of some computer models may be different. In such case, refer to

adjust the V.POSIT and H.POSIT of the menu.

DATA

HSYNC

DATA

VSYNC

Display interval c

Back porch b

Sync a

Front porch d

Display interval c

Back porch b

Sync a

Front porch d

Computer /

Signal

Horizontal signal timing (µs)

a b c d

TEXT 2.0 3.0 20.3 1.0

VGA (60Hz) 3.8 1.9 25.4 0.6

Mac 13"mode 2.1 3.2 21.2 2.1

VGA (72Hz) 1.3 3.8 20.3 1.0

VGA (75Hz) 2.0 3.8 20.3 0.5

VGA (85Hz) 1.6 2.2 17.8 1.6

SVGA (56Hz) 2.0 3.6 22.2 0.7

SVGA (60Hz) 3.2 2.2 20.0 1.0

SVGA (72Hz) 2.4 1.3 16.0 1.1

SVGA (75Hz) 1.6 3.2 16.2 0.3

SVGA (85Hz) 1.1 2.7 14.2 0.6

Mac 16"mode 1.1 3.9 14.5 0.6

XGA (60Hz) 2.1 2.5 15.8 0.4

XGA (70Hz) 1.8 1.9 13.7 0.3

XGA (75Hz) 1.2 2.2 13.0 0.2

XGA (85Hz) 1.0 2.2 10.8 0.5

1152×864 (75Hz)

1.2 2.4 10.7 0.6

1280×960 (60Hz)

1.0 2.9 11.9 0.9

1280×1024 (60Hz)

1.0 2.3 11.9 0.4

1280×1024 (75Hz)

1.1 1.8 9.5 0.2

1280×1024 (85Hz)

1.0 1.4 8.1 0.4

1600×1200 (60Hz)

1.2 1.9 9.9 0.4

Computer /

Signal

Vertical signal timimg (lines)

a b c d

TEXT 342 400 1

VGA (60Hz) 233 480 10

Mac 13"mode 339 480 3

VGA (72Hz) 328 480 9

VGA (75Hz) 316 480 1

VGA (85Hz) 325 480 1

SVGA (56Hz) 222 600 1

SVGA (60Hz) 423 600 1

SVGA (72Hz) 623 600 37

SVGA (75Hz) 321 600 1

SVGA (85Hz) 327 600 1

Mac 16"mode 339 624 1

XGA (60Hz) 629 768 3

XGA (70Hz) 629 768 3

XGA (75Hz) 328 768 1

XGA (85Hz) 336 768 1

1152×864 (75Hz)

332 864 1

1280×960 (60Hz)

336 960 1

1280×1024 (60Hz)

338 1024 1

1280×1024 (75Hz)

337 1024 2

1280×1024 (85Hz)

344 1024 1

1600×1200 (60Hz)

346 1200 1

16CP-S235TECHNICAl03.12.228:48AMページ4

RS-232C Communication

Connection To The Mouse Control

19200bps, 8N1

1. Protocol

Consist of header (7 bytes) + command data (6 bytes).

2. Header

BE + EF + 03 + 06 + 00 + CRC_low + CRC_high

CRC_low : Lower byte of CRC flag for command data

CRC_high : Upper byte of CRC flag for command data

3 Command data

Command Data Chart

Connecting The Cable

Communications Setting

(1)

Turn off the projector and the computer power supplies.

(2)

Connect the CONTROL port of the projector with a RS-232C port of the computer by a RS-232C

cable. Use the cable that fulfills the specification shown in the following figure.

(3)

Turn on the computer power supply and after the computer has started up, turn on the projector power supply.

Action (byte_0 - 1)

Action Classification Content

1SET Change setting to desired value.

2GET Read projector internal setup value.

4INCREMENT Increment setup value by 1.

5DECREMENT Decrement setup value by 1.

6EXECUTE Run a command.

CONTROL

port

D-sub 9-pin

plug

RS-232C port

D-sub 9-pin

plug

D-sub 9-pin

jack

D-sub 9-pin

jack

GND

CTS

RTS

DTR

GND

DSR

RTS

DTS

Projector RS-232C cross cable Computer

6789

54321

9876

12345 6789

54321

9876

12345

⇔⇔

byte_0 byte_1 byte_2 byte_3 byte_4 byte_5

Action Type Setting code

low high low high low high

+5V

–DATA

+DATA

GND

+5V

–DATA

+DATA

GND 1234

USB jack

(B type) USB jack

(A type)

Projector

USB cable

Computer

USB Mouse

16CP-S235TECHNICAl03.12.228:48AMページ5

RS-232C Communication (continued)

Requesting projector status (Get command)

(1) Send the request code Header + Command data (‘02H’+‘00H’+ type (2

bytes)+‘00H’+‘00H’) from the computer to the projector.

(2) The projector returns the response code ‘1DH’+ data (2 bytes) to the computer.

Changing the projector settings (Set command)

(1) Send the setting code Header + Command data (‘01H’+‘00H’+ type (2 bytes) +

setting code (2 bytes)) from the computer to the projector.

(2) The projector changes the setting based on the above setting code.

(3) The projector returns the response code ‘06H’ to the computer.

Using the projector default settings (Reset Command)

(1) The computer sends the default setting code Header + Command data (‘06H’+‘00H’+

type (2 bytes) +‘00H’+‘00H’) to the projector.

(2) The projector changes the specified setting to the default value.

(3) The projector returns the response code ‘06H’ to the computer.

Increasing the projector setting value (Increment command)

(1) The computer sends the increment code Header + Command data (‘04H’+‘00H’+

type (2 bytes) +‘00H’+‘00H’) to the projector.

(2) The projector in creases the setting value on the above setting code.

(3) The projector returns the response code ‘06H’ to the computer.

Decreasing the projector setting value (Decrement command)

(1) The computer sends the decrement code Header + Command data (‘05H’+‘00H’+

type (2 bytes) +‘00H’ + ‘00H’) to the projector.

(2) The projector decreases the setting value on the above setting code.

(3) The projector returns the response code ‘06H’ to the computer.

When the projector cannot understand the received command

When the projector cannot understand the received command, the error code ‘15H’ is

sent back to the computer.

Sometimes the projector cannot properly receive the command. In such a case, the

command is not executed and the error code ‘15H’ is sent back to the computer. If this

error code is returned, send the same command again.

When the projector cannot execute the received command.

When the projector cannot execute the received command, the error code ‘1cH’ +

‘xxxxH’ is sent back to the computer. When the data length is greater than indicated by

the data length code, the projector ignore the excess data code.

Conversely when the data length is shorter than indicated by the data length code, an

error code will be returned to the computer.

•Operation cannot be guaranteed when the projector receives an

undefined command or data.

•Provide an interval of at least 40ms between the response code and any other code.

•The projector outputs test data when the power supply is switched ON, and when the

lamp is lit. Ignore this data.

•Commands are not accepted during warm-up.

NOTE

16CP-S235TECHNICAl03.12.228:48AMページ6

Command Data Chart

Names Operation type Header Command data

CRC Action Type Setting code

Keystone

Get BE EF 03 06 00 B9 D3 02 00 07 20 00 00

Increment BE EF 03 06 00 DF D3 04 00 07 20 00 00

Decrement BE EF 03 06 00 0E D2 05 00 07 20 00 00

Keystone Reset Execute BE EF 03 06 00 08 D0 06 00 0C 70 00 00

Brightness

Get BE EF 03 06 00 89 D2 02 00 03 20 00 00

Increment BE EF 03 06 00 EF D2 04 00 03 20 00 00

Decrement BE EF 03 06 00 3E D3 05 00 03 20 00 00

Brightness Reset Execute BE EF 03 06 00 58 D3 06 00 00 70 00 00

Contrast

Get BE EF 03 06 00 FD D3 02 00 04 20 00 00

Increment BE EF 03 06 00 9B D3 04 00 04 20 00 00

Decrement BE EF 03 06 00 4A D2 05 00 04 20 00 00

Contrast Reset Execute BE EF 03 06 00 A4 D2 06 00 01 70 00 00

Aspect Set

4:3 BE EF 03 06 00 9E D0 01 00 08 20 00 00

16:9 BE EF 03 06 00 0E D1 01 00 08 20 01 00

15:9 BE EF 03 06 00 6E D0 01 00 08 20 03 00

32:15 BE EF 03 06 00 5E D2 01 00 08 20 04 00

WIDE BE EF 03 06 00 CE D3 01 00 08 20 05 00

ZOOM BE EF 03 06 00 3E D3 01 00 08 20 06 00

Get BE EF 03 06 00 AD D0 02 00 08 20 00 00

Whisper Set NORMAL BE EF 03 06 00 3B 23 01 00 00 33 00 00

WHISPER BE EF 03 06 00 AB 22 01 00 00 33 01 00

Get BE EF 03 06 00 08 23 02 00 00 33 00 00

Mirror Set

Normal BE EF 03 06 00 C7 D2 01 00 01 30 00 00

H Inverse BE EF 03 06 00 57 D3 01 00 01 30 01 00

V lnverse BE EF 03 06 00 A7 D3 01 00 01 30 02 00

H&V Inverse BE EF 03 06 00 37 D2 01 00 01 30 03 00

Get BE EF 03 06 00 F4 D2 02 00 01 30 00 00

RS-232C Communication (continued)

16CP-S235TECHNICAl03.12.228:48AMページ7

Command Data Chart (continued)

RS-232C Communication (continued)

Names Operation type Header Command data

CRC Action Type Setting code

Language Set

English BE EF 03 06 00 F7 D3 01 00 05 30 00 00

FRANÇAIS

BE EF 03 06 00 67 D2 01 00 05 30 01 00

Deutsch BE EF 03 06 00 97 D2 01 00 05 30 02 00

ESPAÑOL BE EF 03 06 00 07 D3 01 00 05 30 03 00

Italiano BE EF 03 06 00 37 D1 01 00 05 30 04 00

Norsk BE EF 03 06 00 A7 D0 01 00 05 30 05 00

Nederlands

BE EF 03 06 00 57 D0 01 00 05 30 06 00

PORTUGUÊS

BE EF 03 06 00 C7 D1 01 00 05 30 07 00

日本語

BE EF 03 06 00 37 D4 01 00 05 30 08 00

中文

BE EF 03 06 00 A7 D5 01 00 05 30 09 00

BE EF 03 06 00 57 D5 01 00 05 30 0A 00

SVENSKA BE EF 03 06 00 C7 D4 01 00 05 30 0B 00

BE EF 03 06 00 F7 D6 01 00 05 30 0C 00

SUOMI BE EF 03 06 00 67 D7 01 00 05 30 0D 00

POLSKI BE EF 03 06 00 97 D7 01 00 05 30 0E 00

Get BE EF 03 06 00 C4 D3 02 00 05 30 00 00

Gamma Set

NORMAL BE EF 03 06 00 C7 F0 01 00 A1 30 00 00

CINEMA BE EF 03 06 00 57 F1 01 00 A1 30 01 00

DYNAMIC BE EF 03 06 00 A7 F1 01 00 A1 30 02 00

CUSTOM BE EF 03 06 00 07 FD 01 00 A1 30 10 00

Get BE EF 03 06 00 F4 F0 02 00 A1 30 00 00

Custom Gamma

Get BE EF 03 06 00 08 F1 02 00 A0 30 00 00

Increment BE EF 03 06 00 6E F1 04 00 A0 30 00 00

Decrement BE EF 03 06 00 BF F0 05 00 A0 30 00 00

Custom

Color Temp

Set

USER BE EF 03 06 00 3B F8 01 00 B0 30 10 00

HIGH BE EF 03 06 00 0B F5 01 00 B0 30 03 00

MIDDLE BE EF 03 06 00 9B F4 01 00 B0 30 02 00

LOW BE EF 03 06 00 6B F4 01 00 B0 30 01 00

Get BE EF 03 06 00 C8 F5 02 00 B0 30 00 00

Custom User R Set

50 BE EF 03 06 00 57 F7 01 00 B1 30 05 00

60 BE EF 03 06 00 C7 F6 01 00 B1 30 04 00

70 BE EF 03 06 00 F7 F4 01 00 B1 30 03 00

80 BE EF 03 06 00 67 F5 01 00 B1 30 02 00

90 BE EF 03 06 00 97 F5 01 00 B1 30 01 00

100 BE EF 03 06 00 07 F4 01 00 B1 30 00 00

Get BE EF 03 06 00 34 F4 02 00 B1 30 00 00

Custom User G Set

50 BE EF 03 06 00 13 F7 01 00 B2 30 05 00

60 BE EF 03 06 00 83 F6 01 00 B2 30 04 00

70 BE EF 03 06 00 B3 F4 01 00 B2 30 03 00

80 BE EF 03 06 00 23 F5 01 00 B2 30 02 00

90 BE EF 03 06 00 D3 F5 01 00 B2 30 01 00

100 BE EF 03 06 00 43 F4 01 00 B2 30 00 00

Get BE EF 03 06 00 70 F4 02 00 B2 30 00 00

16CP-S235TECHNICAl03.12.228:48AMページ8

Command Data Chart (continued)

RS-232C Communication (continued)

Names Operation type Header Command data

CRC Action Type Setting code

Custom User B Set

50 BE EF 03 06 00 EF F6 01 00 B3 30 05 00

60 BE EF 03 06 00 7F F7 01 00 B3 30 04 00

70 BE EF 03 06 00 4F F5 01 00 B3 30 03 00

80 BE EF 03 06 00 DF F4 01 00 B3 30 02 00

90 BE EF 03 06 00 2F F4 01 00 B3 30 01 00

100 BE EF 03 06 00 BF F5 01 00 B3 30 00 00

Get BE EF 03 06 00 8C F5 02 00 B3 30 00 00

Color Balance R

Get BE EF 03 06 00 01 D2 02 00 05 20 00 00

Increment BE EF 03 06 00 67 D2 04 00 05 20 00 00

Decrement BE EF 03 06 00 B6 D3 05 00 05 20 00 00

Color Balance R

Reset Execute BE EF 03 06 00 94 D3 06 00 05 70 00 00

Color Balance G

Get BE EF 03 06 00 B5 D7 02 00 12 20 00 00

Increment BE EF 03 06 00 D3 D7 04 00 12 20 00 00

Decrement BE EF 03 06 00 02 D6 05 00 12 20 00 00

Color Balance G

Reset Execute BE EF 03 06 00 04 DB 06 00 29 70 00 00

Color Balance B

Get BE EF 03 06 00 45 D2 02 00 06 20 00 00

Increment BE EF 03 06 00 23 D2 04 00 06 20 00 00

Decrement BE EF 03 06 00 F2 D3 05 00 06 20 00 00

Color Balance B

Reset Execute BE EF 03 06 00 D0 D3 06 00 06 70 00 00

Sharpness

Get BE EF 03 06 00 F1 72 02 00 01 22 00 00

Increment BE EF 03 06 00 97 72 04 00 01 22 00 00

Decrement BE EF 03 06 00 46 73 05 00 01 22 00 00

Sharpness Reset Execute BE EF 03 06 00 C4 D0 06 00 09 70 00 00

Color

Get BE EF 03 06 00 B5 72 02 00 02 22 00 00

Increment BE EF 03 06 00 D3 72 04 00 02 22 00 00

Decrement BE EF 03 06 00 02 73 05 00 02 22 00 00

Color Reset Execute BE EF 03 06 00 80 D0 06 00 0A 70 00 00

Tint

Get BE EF 03 06 00 49 73 02 00 03 22 00 00

Increment BE EF 03 06 00 2F 73 04 00 03 22 00 00

Decrement BE EF 03 06 00 FE 72 05 00 03 22 00 00

Tint Reset Execute BE EF 03 06 00 7C D1 06 00 0B 70 00 00

My Memory Load

Set

1BE EF 03 06 00 0E D7 01 00 14 20 00 00

2BE EF 03 06 00 9E D6 01 00 14 20 00 01

3BE EF 03 06 00 6E D6 01 00 14 20 02 00

4BE EF 03 06 00 FE D7 01 00 14 20 03 00

My Memory Save

Set

BE EF 03 06 00 F2 D6 01 00 15 20 00 00

BE EF 03 06 00 62 D7 01 00 15 20 01 00

BE EF 03 06 00 92 D7 01 00 15 20 02 00

BE EF 03 06 00 02 D6 01 00 15 20 03 00

16CP-S235TECHNICAl03.12.228:48AMページ9

Command Data Chart (continued)

RS-232C Communication (continued)

Names Operation type Header Command data

CRC Action Type Setting code

V Position

Get BE EF 03 06 00 0D 83 02 00 00 21 00 00

Increment BE EF 03 06 00 6B 83 04 00 00 21 00 00

Decrement BE EF 03 06 00 BA 82 05 00 00 21 00 00

V Position Reset Execute BE EF 03 06 00 E0 D2 06 00 02 70 00 00

H Position

Get BE EF 03 06 00 F1 82 02 00 01 21 00 00

Increment BE EF 03 06 00 97 82 04 00 01 21 00 00

Decrement BE EF 03 06 00 46 83 05 00 01 21 00 00

H Position Reset Execute BE EF 03 06 00 1C D3 06 00 03 70 00 00

H Phase

Get BE EF 03 06 00 49 83 02 00 03 21 00 00

Increment BE EF 03 06 00 2F 83 04 00 03 21 00 00

Decrement BE EF 03 06 00 FE 82 05 00 03 21 00 00

H Size

Get BE EF 03 06 00 B5 82 02 00 02 21 00 00

Increment BE EF 03 06 00 D3 82 04 00 02 21 00 00

Decrement BE EF 03 06 00 02 83 05 00 02 21 00 00

H Size Reset Execute BE EF 03 06 00 68 D2 06 00 04 70 00 00

Over Scan

Get BE EF 03 06 00 91 70 02 00 09 22 00 00

Increment BE EF 03 06 00 F7 70 04 00 09 22 00 00

Decrement BE EF 03 06 00 26 71 05 00 09 22 00 00

Over Scan Reset Execute BE EF 03 06 00 EC D9 06 00 27 70 00 00

Color Space

Set

AUTO BE EF 03 06 00 0E 72 01 00 04 22 00 00

RGB BE EF 03 06 00 9E 73 01 00 04 22 01 00

SMPTE240 BE EF 03 06 00 6E 73 01 00 04 22 02 00

REC709 BE EF 03 06 00 FE 72 01 00 04 22 03 00

REC601 BE EF 03 06 00 CE 70 01 00 04 22 04 00

Get BE EF 03 06 00 3D 72 02 00 04 22 00 00

Component

Set COMPONENT BE EF 03 06 00 4A D7 01 00 17 20 00 00

SCART RGB BE EF 03 06 00 DA D6 01 00 17 20 01 00

Get BE EF 03 06 00 79 D7 02 00 17 20 00 00

Video Format Set

AUTO BE EF 03 06 00 9E 75 01 00 00 22 0A 00

NTSC BE EF 03 06 00 FE 71 01 00 00 22 04 00

PAL BE EF 03 06 00 6E 70 01 00 00 22 05 00

SECAM BE EF 03 06 00 6E 75 01 00 00 22 09 00

NTSC 4.43 BE EF 03 06 00 5E 72 01 00 00 22 02 00

M-PAL BE EF 03 06 00 FE 74 01 00 00 22 08 00

N-PAL BE EF 03 06 00 0E 71 01 00 00 22 07 00

Get BE EF 03 06 00 0D 73 02 00 00 22 00 00

Frame Lock Set TURN OFF BE EF 03 06 00 CB D6 01 00 14 30 00 00

TURN ON BE EF 03 06 00 5B D7 01 00 14 30 01 00

Get BE EF 03 06 00 F8 D6 02 00 14 30 00 00

3D-YCS Set

TURN OFF BE EF 03 06 00 E6 70 01 00 0A 22 00 00

NORMAL BE EF 03 06 00 76 71 01 00 0A 22 01 00

STILL IMAGE BE EF 03 06 00 86 71 01 00 0A 22 02 00

Get BE EF 03 06 00 D5 70 02 00 0A 22 00 00

16CP-S235TECHNICAl03.12.228:48AMページ10

Autres manuels pour CP-S235

Table des matières

Autres manuels Hitachi Projecteur

Hitachi

Hitachi CP-WX4022WN Manuel utilisateur

Hitachi

Hitachi CP-RX250 Manuel utilisateur

Hitachi

Hitachi CPX265 - XGA LCD Projector Manuel utilisateur

Hitachi

Hitachi CP-X4011N Manuel utilisateur

Hitachi

Hitachi CP-X2530WN Manuel utilisateur

Hitachi

Hitachi CP-EX353 Manuel utilisateur

Hitachi

Hitachi X807 - CP XGA LCD Projector Document technique

Hitachi

Hitachi CP-X2511N Manuel utilisateur

Hitachi

Hitachi CP-X990W Manuel utilisateur

Hitachi

Hitachi ED-X30 Manuel utilisateur

Hitachi

Hitachi ED-AW100N Manuel utilisateur

Hitachi

Hitachi CP-X201 Manuel utilisateur

Hitachi

Hitachi ED-X24Z and Document technique

Hitachi

Hitachi Illumina PJ-TX10 Manuel utilisateur

Hitachi

Hitachi Performa CP-RS55 Mode d’emploi

Hitachi

Hitachi CP-A222WN Manuel utilisateur

Hitachi

Hitachi CP-S235W Manuel utilisateur

Hitachi

Hitachi ED-X20EF Manuel utilisateur

Hitachi

Hitachi CP-WU5500 Manuel utilisateur

Hitachi

Hitachi CP-X4022WN Manuel utilisateur

Hitachi

Hitachi CP-TW2503 Manuel utilisateur

Hitachi

Hitachi CP-X3 Manuel utilisateur

Hitachi

Hitachi CP-X940E Manuel utilisateur

Hitachi

Hitachi CP-WX410 Guide de démarrage rapide

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur