Hirschmann MACH 4000 Series Manuel utilisateur

RM Web

Release

6.0

07/2010

Technical Support

[email protected]

Reference Manual

Web-based Interface

Industrial ETHERNET (Gigabit) Switch

PowerMICE, MACH 1040, MACH 4000

The naming of copyrighted trademarks in this manual, even when not specially indicated, should

not be taken to mean that these names may be considered as free in the sense of the trademark

and tradename protection law and hence that they may be freely used by anyone.

translation, conversion into any electronic medium or machine scannable form is not permitted,

either in whole or in part. An exception is the preparation of a backup copy of the software for

your own use. For devices with embedded software, the end-user license agreement on the

enclosed CD applies.

The performance features described here are binding only if they have been expressly agreed

when the contract was made. This document was produced by Hirschmann Automation and

Control GmbH according to the best of the company's knowledge. Hirschmann reserves the right

to change the contents of this document without prior notice. Hirschmann can give no guarantee

in respect of the correctness or accuracy of the information in this document.

Hirschmann can accept no responsibility for damages, resulting from the use of the network

components or the associated operating software. In addition, we refer to the conditions of use

specified in the license contract.

You can get the latest version of this manual on the Internet at the Hirschmann product site

(www.hirschmann-ac.de).

Printed in Germany

Hirschmann Automation and Control GmbH

Stuttgarter Str. 45-51

72654 Neckartenzlingen

Germany

Tel.: +49 1805 141538

Rel. 6.0 1-01-07/2010 – 14.7.10

Contents

About this Manual 9

Key 11

Opening the Web-based Interface 13

1 Basic Settings 17

1.1 System 18

1.2 Network 24

1.3 Software 26

1.3.1 View the software versions present on the device 26

1.3.2 TFTP Software Update 27

1.3.3 HTTP Software Update 27

1.3.4 Automatic software update by ACA 28

1.4 Port Configuration 29

1.5 Power over ETHERNET 31

1.6 Loading/Saving the Configuration 33

1.6.1 Loading the configuration 34

1.6.2 Saving the Configuration 34

1.6.3 URL 35

1.6.4 Deleting a configuration 35

1.6.5 Using the AutoConfiguration Adapter (ACA) 36

1.6.6 Canceling a configuration change 38

1.7 Restart 39

2 Security 41

2.1 Password / SNMPv3 access 42

2.2 SNMPv1/v2 Access Settings 45

2.3 Telnet/Web/SSH Access 48

2.3.1 Description of Telnet Access 49

2.3.2 Description of Web Access 49

2.3.3 Description of SSH Access 50

2.4 Restricted Management Access 51

2.5 Port Security 54

Contents

4RM Web

Release

6.0

07/2010

2.6 IEEE 802.1X Port Authentication 57

2.6.1 IEEE 802.1X Global 57

2.6.2 IEEE 802.1X Port Configuration 59

2.6.3 IEEE 802.1X Port Statistics 62

2.6.4 RADIUS Server Settings for IEEE 802.1X 64

3Time 67

3.1 SNTP configuration 69

3.2 PTP (IEEE 1588) 73

3.2.1 PTP Global (MS20/MS30, PowerMICE, MACH 104,

MACH 1040) 74

3.2.2 PTP Version 1 (MS20/MS30, PowerMICE,

MACH 104, MACH 1040) 78

3.2.3 PTP Version 2 (BC) (MS20/MS30, PowerMICE,

MACH 104, MACH 1040) 80

3.2.4 PTP Version 2 (TC) (MS20/MS30, PowerMICE) 85

4 Switching 89

4.1 Switching Global 90

4.2 Filters for MAC addresses 94

4.3 Rate Limiter 96

4.4 Multicasts 98

4.4.1 IGMP (Internet Group Management Protocol) 98

4.4.2 GMRP (GARP Multicast Registration Protocol) 105

4.5 VLAN 108

4.5.1 VLAN Global 108

4.5.2 Current VLAN 111

4.5.3 VLAN Static 113

4.5.4 VLAN Port 115

5 QoS/Priority 119

5.1 Global 120

5.2 Port Configuration 122

5.2.1 Entering the port priority 123

5.2.2 Selecting the trust mode 123

5.2.3 Displaying the untrusted traffic class 124

5.2.4 Shaping rate 125

5.3 802.1D/p mapping 126

5.4 IP DSCP mapping 128

Contents

RM Web L3E

Release

6.0

07/2010 5

5.5 Queue Management 130

5.5.1 Strict Priority 131

5.5.2 Weighted Fair Queuing 131

5.5.3 Maximum bandwidth 132

6 Routing 133

6.1 Routing Global 134

6.2 Configuring Router Interfaces 135

6.2.1 Configuration 135

6.2.2 Configuring secondary addresses 138

6.3 ARP 139

6.3.1 Setting ARP parameters 140

6.3.2 ARP statistics display 141

6.3.3 ARP table display 141

6.3.4 Editing the ARP table 142

6.4 Router Discovery Configuration 144

6.5 RIP 145

6.5.1 Configuration 145

6.5.2 Route distribution 147

6.5.3 Statistics 148

6.6 Routing table 150

6.6.1 Current 150

6.6.2 Static 151

6.6.3 Preferences 152

6.7 Tracking 154

6.7.1 Configuration 154

6.7.2 Applications 156

7 Redundancy 157

7.1 Link Aggregation 158

7.2 Ring Redundancy 161

7.2.1 Configuring the HIPER-Ring 163

7.2.2 Configuring the MRP-Ring 167

7.3 Sub-Ring 170

7.3.1 Sub-Ring configuration 171

7.3.2 Sub-Ring - New Entry 174

7.4 Ring/Network Coupling 176

7.4.1 Preparing a Ring/Network coupling 176

7.5 Spanning Tree 183

Contents

6RM Web

Release

6.0

07/2010

7.5.1 Global 185

7.5.2 MSTP (Multiple Spanning Tree) 192

7.5.3 Port 198

7.6 VRRP/HiVRRP 208

7.6.1 VRRP/HiVRRP configuration 208

7.6.2 HiVRRP domains 213

7.6.3 Statistics 214

7.6.4 Tracking 216

8 Advanced 219

8.1 DHCP Relay Agent 220

8.2 DHCP Server 222

8.2.1 Global 222

8.2.2 Pool 224

8.2.3 Lease Table 228

8.3 Industrial Protocols 230

8.3.1 PROFINET IO 230

8.3.2 EtherNet/IP 232

8.4 Command Line 233

9 Diagnostics 235

9.1 Syslog 236

9.2 Event Log 241

9.3 Ports 242

9.3.1 Statistics table 242

9.3.2 Utilization 243

9.3.3 SFP modules 245

9.3.4 TP Cable Diagnosis 246

9.4 Configuration Check 248

9.5 Topology Discovery 250

9.6 Port Mirroring 252

9.7 Device Status 254

9.8 Signal contact 257

9.8.1 Manual setting 257

9.8.2 Function monitoring 257

9.8.3 Device status 259

9.8.4 Configuring traps 259

9.9 Alarms (Traps) 261

Contents

RM Web L3E

Release

6.0

07/2010 7

9.10 Report 264

9.11 IP address conflict detection 266

9.12 Self Test 268

A Appendix 269

B Readers’ Comments 278

C Index 281

D Further Support 285

Contents

8RM Web

Release

6.0

07/2010

About this Manual

RM Web L3E

Release

6.0

07/2010 9

About this Manual

The "Web-based Interface" reference manual contains detailed information

on using the Web interface to operate the individual functions of the device.

The "Command Line Interface" reference manual contains detailed

information on using the Command Line Interface to operate the individual

functions of the device.

The “Installation” user manual contains a device description, safety

instructions, a description of the display, and the other information that you

need to install the device.

The “Basic Configuration” user manual contains the information you need to

start operating the device. It takes you step by step from the first startup

operation through to the basic settings for operation in your environment.

The “Industry Protocols” user manual describes how the device is connected

by means of a communication protocol commonly used in the industry, such

as EtherNet/IP or PROFINET IO.

The “Routing Configuration” user manual contains all the information you

need to start operating the routing function. It takes you step by step from

a small router application through to the router configuration of a complex

network.

The manual enables you to configure your router by following the examples.

About this Manual

10 RM Web

Release

6.0

07/2010

The Network Management Software HiVision/Industrial HiVision provides

you with additional options for smooth configuration and monitoring:

XConfiguration of multiple devices simultaneously.

XGraphical interface with network layouts.

XAuto-topology discovery.

XEvent log.

XEvent handling.

XClient / Server structure.

XBrowser interface

XActiveX control for SCADA integration

XSNMP/OPC gateway

Autres manuels pour MACH 4000 Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Hirschmann Changer

Hirschmann

Hirschmann RS20 series Manuel utilisateur

Hirschmann

Hirschmann PowerMICE MS4128 Manuel utilisateur

Hirschmann

Hirschmann SPIDER 5TX Manuel

Hirschmann

Hirschmann RS20 series Manuel utilisateur

Hirschmann

Hirschmann MACH104-20TX-F Series Manuel utilisateur

Hirschmann

Hirschmann SPIDER PL Manuel utilisateur

Hirschmann

Hirschmann PAT TRS 05 / PATB3 Guide de l'utilisateur

Hirschmann

Hirschmann SPIDER 5TX Manuel

Hirschmann

Hirschmann Dragon PTN Manuel utilisateur

Hirschmann

Hirschmann PowerLION-24TP Manuel utilisateur

Hirschmann

Hirschmann LION-GIGA-1SX Manuel utilisateur

Hirschmann

Hirschmann OCTOPUS OS20 Manuel utilisateur

Hirschmann

Hirschmann MAR1042 Manuel utilisateur

Hirschmann

Hirschmann MACH4000 Series Manuel utilisateur

Hirschmann

Hirschmann GECKO 4TX Manuel utilisateur

Hirschmann

Hirschmann RS20 series Manuel utilisateur

Hirschmann

Hirschmann LRS Series Manuel utilisateur

Hirschmann

Hirschmann OS20-001000T5T5TAFUHB Manuel utilisateur

Hirschmann

Hirschmann OCTOPUS 8M Series Manuel utilisateur

Hirschmann

Hirschmann RS20 series Manuel utilisateur

Hirschmann

Hirschmann MSM20 Manuel utilisateur

Hirschmann

Hirschmann RSPL 20 Manuel utilisateur

Hirschmann

Hirschmann MSP30 Manuel utilisateur

Hirschmann

Hirschmann RS20 series Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur