HighPoint SSD7505 Manuel utilisateur

Linux Ubuntu Server on SSD7505 Installation Guide

SSD7505 Controller

Linux Ubuntu Server 20.04.4

Installation Guide

Version 1.02

Last updated on June 30, 2022

Linux Ubuntu Server on SSD7505 Installation Guide 
i 
Table of Contents 
1 Overview.......................................................................................................................................1 
2 Installing Linux Ubuntu Server on SSD7505 controller...........................................................1 
Step 1 PrepareYour Hardware for Installation .........................................................................1 
Step 2 Check System EFI Settings............................................................................................1 
Step 3 Flash UEFI Rom to SSD7505........................................................................................3 
Step 4 Create Array...................................................................................................................4 
Step 5 Prepare the Driver Diskette............................................................................................5 
Step 6 Install Linux Ubuntu Server...........................................................................................6 
3 Monitoring the Driver .................................................................................................................8 
4 Installing RAID Management Software.....................................................................................9 
5 Rebuilding Driver Module for System Update..........................................................................9 
6 Trouble Shooting..........................................................................................................................9 
 
 

Linux Ubuntu Server on SSD7505 Installation Guide

- 1 -

1 Overview

The purpose of this document is to provide clear instructions on how to install Linux

Ubuntu Server on the SSD7505 controller.

2 Installing Linux Ubuntu Server on SSD7505

controller

If you would like to install Linux Ubuntu Server onto drives attached to SSD7505

controller, please perform the following operations:

Step 1 Prepare Your Hardware for Installation

After you attach your NVMe SSD to SSD7505 controller, you can use SSD7505 EFI

Utility to configure your NVMe SSD as RAID arrays, or just use them as single disks.

Before installation, you must remove all the NVMe SSD, which are not physically

attached to SSD7505 controller, from your system.

Note

SSD7505 only support EFI boot. If you have other SCSI adapters installed, you must

make sure the SSD7505 controller EFI will be loaded firstly. If not, try to move it to

another PCI slot. Otherwise you may be unable to boot up your system.

Step 2 Check System EFI Settings

In your system EFI SETUP menu, change Boot Sequence in such a way that the system

will first boot from EFI CDROM, and then from SSD7505 RAID. Refer to your

motherboard EFI manual to see how to set boot sequence.

If your EFI settings do not support such a boot sequence, you can first set it to boot from

EFI CDROM.After you finish installation, set SSD7505 RAID as the first boot device to

boot up the system.

1. Set UEFI setting with SuperMicro H12SSL -i motherboard as an example.

a. "Advanced->PCIe/PCI/PnP Configuration->CPUSlot PCI-E OPROM"

to "EFI".Suppose SSD7505 is connected to motherboard CPU1 Slot 2 PCI-E

X16,then you should set "CPU1 Slot 2 PCI-E X16 OPROM" to "EFI";

Linux Ubuntu Server on SSD7505 Installation Guide

- 2 -

b. Disable "Secure Boot", set "Attempt Secure Boot" to "Disabled".

2. Set UEFI setting with ASUS PRIME X299 -DELUXE motherboard as an example:

a. Set "Boot from Storage Devices" to "UEFI driver first";

b. And "Boot Device Control" to "UEFI Only" or "UEFI and Legacy OPROM";

Linux Ubuntu Server on SSD7505 Installation Guide

- 3 -

c. Set "OS Type" to "Other OS".

Step 3 Flash UEFI Rom to SSD7505

a. Unzip SSD7505 UEFI package to root dir(/) of a USB flash driver,and insert the

USB flash drive to the motherboard;

b. Booting from the UEFI USB flash and enter the UEFI environment ;

c. Command with “SSD7505.nsh”, flash UEFI rom to SSD7505 Controller and

reboot;

Linux Ubuntu Server on SSD7505 Installation Guide

- 4 -

Step 4 Create Array

a. Attach four NVMe SSD to SSD7505 Controller ;

Note

Make sure your USB flash partition format is NTFS or FAT32.

b. Boot, in the presence of the motherboard Log screen, there will be NVMe SSD

information：

c. Enter the motherboard’s Boot List and select start from UEFI USB flash:

d. Command ”Arraycreate.efi” to enter the Utility:

Linux Ubuntu Server on SSD7505 Installation Guide

- 5 -

e. Command “create RAID0 ”.

Create RAID0 array with all disks and with maximum capacity.

f. Command “exit”；

g. For more command usages, refer toAppendixA.

Step 5 Prepare the Driver Diskette

Extract HighPoint_NVMe_Ubuntu_20.04.4_x86_64_vx.x.x_xx_xx_xx.tar.gz to top(/)

directory of an USB flash drive. It will look like:

Linux Ubuntu Server on SSD7505 Installation Guide

- 6 -

Step 6 Install Linux Ubuntu Server

a. Insert the USB flash drive to the target system.

b. Booting from Installation DVD disc (EFI mode).

c. When the Installation screen appears, press ‘e’ to edit boot command line option.

On the edit command window, move the cursor to the end of line “linux

/casper/vmlinuz...quiet ”, and append "modprobe.blacklist=nvme" (double quotation

mark are not include).

Press CTRL-x or F10 to start the system.

d. When the installation started:

Press ALT-F2 to switch new console window and press ENTER to activate this console.

Ubuntu login: ubuntu

Linux Ubuntu Server on SSD7505 Installation Guide

- 7 -

And the then execute following commands to copy the driver contents.

# mkdir /hptdd ← Create mount point for USB flash drive

# mount /dev/sda1 /hptdd ← Mount the USB flash drive to /hptdd

#cp -a /hptdd/hptdd /tmp ← Copy driver installation file to

system temporary directory

# umount /dev/sda1 ← Unmount the USB flash drive

# sh /tmp/hptdd/preinst.sh ← Load SSD7505 driver.

e. Press ALT-F1 to continue system installation.

f. When the installation prompts “Reboot now”.

Linux Ubuntu Server on SSD7505 Installation Guide

- 8 -

Press ALT-F2 and execute following command to install driver to the installed Linux

Ubuntu Server on the array of SSD7505.

# sh /tmp/hptdd/postinst.sh ← Install SSD7505 driver.

g. Press ALT-F1 and press “Reboot Now” to finish the installation.

h. Open source driver needs to be installed after system installation.

https://www.highpoint-tech.com/ssd/ssd7505-overview

Run the .bin file to install the driver package.

# ./hptnvme_g5_linux_src_vxx.x.x_xx_xx_xx.bin

i. Follow the prompts to complete the driver installation.

j. After the installation is complete, you can perform system update operations.

3 Monitoring the Driver

Once the driver is running, you can monitor it through the Linux proc file system support.

There is a special file under /proc/scsi/hptnvme /. Through this file you can view driver

status and send control commands to the driver.

Note

The file name is the SCSI host number allocated by OS. If you have no other SCSI cards

installed, it will be 0. In the following sections, we will use x to represent this number.

Using the following command to show driver status:

# cat /proc/scsi/hptnvme /x

Autres manuels pour SSD7505

Table des matières

Autres manuels HighPoint Contrôleurs

HighPoint

HighPoint SSD7103 Manuel utilisateur

HighPoint

HighPoint RocketRAID mini-SAS 6G HBA Series Manuel utilisateur

HighPoint

HighPoint RocketRAID 174x Manuel utilisateur

HighPoint

HighPoint Rocket Dual eSATA 6Gb/s For Mac Manuel utilisateur

HighPoint

HighPoint Rocket 700L Series Manuel utilisateur

HighPoint

HighPoint RocketRAID eSATA 6G series Manuel utilisateur

HighPoint

HighPoint SSD7103 Manuel utilisateur

HighPoint

HighPoint SSD7749M Manuel utilisateur

HighPoint

HighPoint SSD7540 Manuel utilisateur

HighPoint

HighPoint SSD7000 Series Manuel utilisateur

HighPoint

HighPoint RocketRAID mini-SAS 6G HBA Series Manuel utilisateur

HighPoint

HighPoint RocketRAID 3G mini SAS HBA Series Manuel utilisateur

HighPoint

HighPoint SSD6202A Manuel utilisateur

HighPoint

HighPoint Rocket 700 Series Manuel utilisateur

HighPoint

HighPoint ATA-133 RAID Manuel utilisateur

HighPoint

HighPoint RocketRAID 2840A Manuel utilisateur

HighPoint

HighPoint RR37 8 28 Series Manuel utilisateur

HighPoint

HighPoint RocketRAID 3G mini-SAS HBA Series Manuel utilisateur

HighPoint

HighPoint SSD7103 Manuel utilisateur

HighPoint

HighPoint SSD7110 Manuel utilisateur

HighPoint

HighPoint SSD7105 Manuel utilisateur

HighPoint

HighPoint SSD7101A-1 Manuel utilisateur

HighPoint

HighPoint Rocket 760A Manuel utilisateur

HighPoint

HighPoint RocketRAID 272 Series Manuel utilisateur

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

Emerson

Emerson SW93 Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Panasonic

Panasonic FP? Positioning Unit RTEX Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Siemens

Siemens OpenAir GMA 1 Series Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur