HighPoint SSD6202A Manuel utilisateur

SSD6202A

2x M.2 Port to PCIe 3.0 x8 NVMe RAID Controller

Quick Installation Guide

V1.04

System Requirements

PC Requirements

System with a free PCIe 4.0/3.0 x16 or PCIe 4.0/3.0 x8 slot

Windows

Linux

VMware

For more information, please visit the SSD6200 Series Product Page:

https://highpoint-tech.com/USA_new/series-ssd6200-overview.html

SSD6202A Kit Content

SSD6202A Controller Card

Low-Profile bracket

Quick Installation Guide

SSD6202A Hardware

Front View

Heat sink for M.2 SSD’s

Fan for NVMe chipset

Fan power connector

PCIe 3.0 x8 Host Interface

RAID Switch

LED Support

SSD6202A Hardware Installation

Step 1. On the rear of the SSD6202A, remove the four screws that

secure the unit’s heat sink to the PCB.

After removing the screws, carefully remove the heat sink from

the SSD6202A.

Step 2. These 2 screws are used to install the NVMe SSD’s.

Step 3. Please remove the screws on the right side of the SSD6202A.

Gently insert the SSD into the slot.

Step 4. Refasten the screw to secure the SSD.

Note: Make sure the SSDs are carefully, but securely installed into

each M.2 port. Loose connections can cause a variety of stability

and performance issues, and may ultimately result in data loss.

Step 5. Repeat Steps 3 & 4 to install the remaining SSD.

The following example shows two M.2 NVMe SSDs installed

into Port 1 & 2:

Step 6. Align and install the heatsink; on the rear of the SSD6202A,

refasten the 4 screws that were removed in step 1.

Note

：

Make sure the aluminum cover is properly aligned with the

controller board (PCB), and that it makes full contact with the

thermal pad, before refastening it to the SS6202. If the cover is

improperly installed, thermal pad will be unable to sufficiently

cool the NVMe SSD’s and controller componentry, which may

result in damage to the SSD’s or controller hardware,

performance loss, unstable I/O, and the loss of data.

Note: The SSD6202A can create RAID arrays via RAID Switch

settings. (You can also create RAID arrays using the UEFI, CLI &

WebGUI tools).

RAID Switch: four options are available; when the system starts, the

SSD6202A will automatically create the specified array using the

hosted NVMe SSD’s.

None

JBOD

RAID 1

RAID 0

Note: Using the RAID Switch to configure an array will destroy any

data stored on the NVMe SSD’s. Make sure to backup any important

data before using this feature.

RAID Switch

Note: There are four LED support in SSD6202A

RAID LED: when the SSD6202A has no RAID, the RAID LED

is off. If there is a normal RAID in the SSD6202A, the RAID

LED is green. If the RAID is failed (RAID Status is Disable or

Critical), the RAID LED is red.

PCIe LED: the PCIe LED turns off when there's no PCIe Link. If

the bandwidth is PCIe x8, the PCIe LED is green. If the

bandwidth is not PCIe x8 (PCIe x4 or x2), the PCIe LED is red.

SSD LED: when the SSD6202A has no disks, the SSD LED is off.

If the disks are active, the SSD LED is green. If any disks fail, the

SSD LED is red.

RAID LED

PCIe LED

PORT1 SSD LED

PORT2 SSD LED

Resources

We recommend visiting the SSD6200 Series Product Page for the latest

software and installation guides.

Software Download:

https://highpoint-tech.com/USA_new/series-ssd6200-overview.html

Customer Support

If you encounter any problems while utilizing the SSD6202A, or have

any questions about this or any other HighPoint Technologies, Inc.

product, feel free to contact our Customer Support Department.

Web Support:

https://www.highpoint-tech.com/websupport/main.php

HighPoint Technologies, Inc. websites:

https://www.highpoint-tech.com

Table des matières

Autres manuels HighPoint Contrôleurs

HighPoint

HighPoint RocketRAID 3G mini-SAS HBA Series Manuel utilisateur

HighPoint

HighPoint RocketRAID 37 Series Manuel utilisateur

HighPoint

HighPoint SSD7110 Manuel utilisateur

HighPoint

HighPoint RocketRAID mini-SAS 6G HBA Series Manuel utilisateur

HighPoint

HighPoint RR64 L Series Manuel utilisateur

HighPoint

HighPoint RocketRAID 272 Series Manuel utilisateur

HighPoint

HighPoint RocketRAID 2722A Manuel utilisateur

HighPoint

HighPoint RocketRAID 37 Series Manuel utilisateur

HighPoint

HighPoint RR640L Manuel utilisateur

HighPoint

HighPoint R1000 Series Manuel utilisateur

HighPoint

HighPoint SSD7580B Manuel utilisateur

HighPoint

HighPoint RocketU 1142A Manuel utilisateur

HighPoint

HighPoint SSD7101A-1 Manuel utilisateur

HighPoint

HighPoint RocketRAID 644L Manuel utilisateur

HighPoint

HighPoint SSD7103 Manuel utilisateur

HighPoint

HighPoint SSD7505 Manuel utilisateur

HighPoint

HighPoint SSD7103 Manuel utilisateur

HighPoint

HighPoint SSD7749E Manuel utilisateur

HighPoint

HighPoint Rocket Dual eSATA 6Gb/s For Mac Manuel utilisateur

HighPoint

HighPoint RocketRAID 3G mini SAS HBA Series Manuel utilisateur

HighPoint

HighPoint Rocket 760A Manuel utilisateur

HighPoint

HighPoint Rocket 700L Series Manuel utilisateur

HighPoint

HighPoint RocketRAID 2840A Manuel utilisateur

HighPoint

HighPoint ATA-133 RAID Manuel utilisateur

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

Emerson

Emerson SW93 Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Panasonic

Panasonic FP? Positioning Unit RTEX Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Siemens

Siemens OpenAir GMA 1 Series Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur