HighPoint SSD7101A-1 Manuel utilisateur

1

SSD7101A-1

4x M.2 Port to PCIe 3.0x16 NVMe RAID Controller

Quick Installation Guide

V1.05

2

System Requirements

PC Requirements

•System with a free PCIe 4.0 x16 or PCIe3.0 x16 slot

•Windows 11, 10 / Server 2022, 2019, 2016, 2012R2 / Microsoft

Hyper-V

•RHEL/Debian/Ubuntu/Fedora/Proxmox/Xenserver /Rocky Linux

(Linux kernel 3.10 and later)

•Arch Linux (Kernel 5.17.5 and above)

•macOS 10.13.6 ~ macOS 13.x

SSD7101A-1 Kit Contents

•SSD7101A-1 Controller Card

•Quick Installation Guide

3

SSD7101A-1 Hardware

Front View

Low-Noise cooling fan

Aluminum casing with integrated thermal pad

PCIe 3.0 x16 Host Interface

Intake for cooling fan

4

Hardware Installation:

Step 1. On the rear of the SSD7101A-1, remove the six screws that

secure the unit’s front panel to the PCB.

After removing the screws, carefully remove the front panel from the

SSD7101A-1.

Step 2. After removing the casing, carefully turn it over to view the

thermal pad. The blue film must be removed from the pad before

reinstalling the panel. This film protects the pad from damage and

foreign objects prior to installation, however, it can also prevent the

thermal pad form conducting the heat away from the NVMe SSD's if

we don't remove it.

5

Step 3. These 4 screws are used to install the NVMe SSD’s.

Step 4. The SSDs should be installed from top to bottom. Remove the

top screw.

Step 5. Gently insert the SSD into the slot.

6

Note: Please make sure all disks are clean before you insert them

into the slot to avoid unexpected situations.

Step 6. Refasten the screw to secure the SSD.

Repeat Steps 4 to 6 to install the remaining SSDs.

Note: Make sure the SSDs are carefully, but securely installed into

each M.2 port. Loose connections can cause a variety of stability

and performance issues, and may ultimately result in data loss.

The following example shows four SSDs installed into Port 1, 2, 3

& 4;

Step 7. Replace the front panel after installing all SSDs.

Port

Port

Port

Port

7

Step 8. On the rear of the SSD7101A-1, refasten the 6 screws that were

removed in step 1.

Note

：

Make sure the aluminum cover is properly aligned with the

controller board (PCB), and that it makes full contact with the thermal

pad, before refastening it to the SSD7101A-1. If the cover is improperly

installed, the fan and thermal pad will be unable to sufficiently cool the

NVMe SSD’s and controller componentry, which may result in damage

to the SSD’s or controller hardware, performance loss, unstable I/O,

and the loss of data.

Note: Please be sure to connect NVMe before using the product to

reduce the occurrence of unnecessary errors!

Note: Install the driver in the system first and then install the board

!

8

Resources

A variety of manuals, guides and FAQ’s are available for the

SSD7101A-1 RAID controller.

In addition, we recommend visiting the Software Downloads webpage

for the latest drivers, management interfaces, and installation guides.

For Software Downloads, Documentation and more information

about this product, please visit the following website:

https://www.highpoint-tech.com/gen3-nvme-m2-non-bootable

FAQ & Troubleshooting:

FAQ - HighPoint Technologies, Inc. (helpjuice.com)

9

Customer Support

If you encounter any problems while utilizing the SSD7101A-1, or have

any questions about this or any other HighPoint Technologies, Inc.

product, feel free to contact our Customer Support Department.

Web Support:

https://www.highpoint-tech.com/support-and-services

HighPoint Technologies, Inc. websites:

https://www.highpoint-tech.com

© Copyright 2022 HighPoint Technologies, Inc. All rights reserved.

Autres manuels pour SSD7101A-1

3

Table des matières

Autres manuels HighPoint Contrôleurs

HighPoint

HighPoint RocketRAID 3G mini SAS HBA Series Manuel utilisateur

HighPoint

HighPoint SSD7110 Manuel utilisateur

HighPoint

HighPoint SSD7580B Manuel utilisateur

HighPoint

HighPoint RR640L Manuel utilisateur

HighPoint

HighPoint SSD7105 Manuel utilisateur

HighPoint

HighPoint RR64 L Series Manuel utilisateur

HighPoint

HighPoint HPT366 Guide d'installation et d'utilisation

HighPoint

HighPoint Rocket 700 Series Manuel utilisateur

HighPoint

HighPoint ATA-133 RAID Manuel utilisateur

HighPoint

HighPoint SSD7180 Manuel utilisateur

HighPoint

HighPoint SSD7103 Manuel utilisateur

HighPoint

HighPoint Rocket Dual eSATA 6Gb/s For Mac Manuel utilisateur

HighPoint

HighPoint RocketU 1144B Manuel utilisateur

HighPoint

HighPoint RocketRAID 37 Series Manuel utilisateur

HighPoint

HighPoint SSD7103 Manuel utilisateur

HighPoint

HighPoint RocketRAID mini-SAS 6G HBA Series Manuel utilisateur

HighPoint

HighPoint SSD7110 Feuille d'instructions

HighPoint

HighPoint SSD7505 Manuel utilisateur

HighPoint

HighPoint Rocket 710L Manuel utilisateur

HighPoint

HighPoint SSD7580B Manuel utilisateur

HighPoint

HighPoint RocketRAID 174x Manuel utilisateur

HighPoint

HighPoint RR640L Manuel utilisateur

HighPoint

HighPoint Rocket 620 Manuel utilisateur

HighPoint

HighPoint RocketRAID eSATA 6G series Manuel utilisateur

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

Emerson

Emerson SW93 Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Panasonic

Panasonic FP? Positioning Unit RTEX Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Siemens

Siemens OpenAir GMA 1 Series Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur