HETRONIC Pocket-MFSHL Manuel utilisateur

Table des matières

Autres manuels HETRONIC Émetteur

HETRONIC

HETRONIC NOVA Series Manuel utilisateur

HETRONIC

HETRONIC MINI Manuel utilisateur

HETRONIC

HETRONIC ERGO-S Manuel utilisateur

HETRONIC

HETRONIC MINI V1 Mode d’emploi

HETRONIC

HETRONIC ERGO-F 2.4 GHz Manuel utilisateur

HETRONIC

HETRONIC ERGO-F 2.4 GHz Manuel utilisateur

HETRONIC

HETRONIC NOVA S Manuel utilisateur

HETRONIC

HETRONIC NOVA-M Manuel utilisateur

HETRONIC

HETRONIC ERGO-S Manuel utilisateur

HETRONIC

HETRONIC NOVA-L Manuel utilisateur

HETRONIC

HETRONIC ERGO-F 2.4 GHz Mode d’emploi

HETRONIC

HETRONIC NOVA XL Manuel utilisateur

HETRONIC

HETRONIC NOVA-L Manuel utilisateur

HETRONIC

HETRONIC NOVA XL Manuel utilisateur

HETRONIC

HETRONIC MFSHL915 Manuel utilisateur

HETRONIC

HETRONIC FBTX-01 Manuel utilisateur

HETRONIC

HETRONIC NOVA L Mode d’emploi

Manuels Émetteur populaires d'autres marques

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuel du propriétaire

Honeywell

Honeywell 5816WMBR Manuel utilisateur

Kamstrup

Kamstrup READy MTU Mode d'emploi

Omega

Omega ZW Series Manuel utilisateur

ABB

ABB Field 264H Mode d’emploi

Alinco

Alinco DJ-V17T Manuel utilisateur

Dejero

Dejero EnGo 3x Manuel utilisateur

Rosemount

Rosemount 4600 Manuel utilisateur

Speaka Professional

Speaka Professional 2342740 Manuel utilisateur

trubomat

trubomat GAB 1000 Manuel utilisateur

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuel utilisateur

Rondish

Rondish UT-11 Manuel utilisateur

MG

MG 10JRE Manuel utilisateur

Burkert

Burkert 8177 Manuel utilisateur

Firetide

Firetide HotPort 3203 Manuel

Tele Radio

Tele Radio T9-02 Manuel utilisateur

Rotronic

Rotronic HygroFlex HF3 Series Manuel utilisateur

Jamara

Jamara FCX6 Pro Tel Manuel utilisateur

User’s Manual

Pocket-MFSHL Transmitter

1. DESCRIPTION

The Pocket-MFSHL transmitter has a coder board with 11 digital channel(DK) inputs. It includes a

Low Voltage Indicator (LVI) warning, 1% duty cycle and 2 seconds turn off time. It also includes

switch detection on power up to ensure that no switch is active when the battery is inserted. The RF

section uses FM-RF with 915MHz frequency and 76800 baud rate.

Note: Operation is subject to the following two conditions: (1) this device may not

cause interference, and (2) this device must accept any interference that may cause

undesired operation of the device.

2. TECHNICAL SPECIFICATIONS

Note: The user is cautioned that changes or modifications not expressly approved by

the party responsible for compliance could void the user’s authority to operate the

equipment.

Temperature Range -20oto +70oCelsius

Supply Voltage Range 2-5 VDC

Supply Current 42mA max

28mA for 5 seconds on startup

Outputs RF-Data

2 LED

Inputs 11 digital

RF Specifications

Frequency 915.0 MHz

Modulation FM-Binary FSK

Deviation 64KHz

Output Power 5dBm

3. TRANSMITTER PARTS

Battery Cove

r

Battery Compartment

(3 AA batteries)

Switches

4. FUNCTIONAL DESCRIPTION

4.1. General Description

• This transmitter is designed to transmit with RF-transmission duty cycle of 1%.

• The transmitter will turn off automatically 2 seconds after all buttons are released.

• STOP (S1) is an emergency stop button that has priority above all other buttons.

• START (DK1/2) is a start or horn function. This button can be used to reset error in the receiver

(Overload/ Main Contact error).

• DK3-8, DK11-13 are regular digital channels

4.2. Switch Error Detection

The transmitter unit has a function that detects when a switch is broken. If a switch is active when a

battery is inserted the unit will go into an error state. The Red LED will come on and stay on until

the active switch is turned off.

4.3. Low Voltage Indicator

The unit has a low battery detection function. Once the battery level becomes low, the Red LED will

come on solid while the Green LED keeps blinking with every telegram. If the voltage level reaches

a critical level, the transmitter will only send Emergency Stop telegrams.

4.4. LED Description

Green Flashing: Telegram Transmitted

Red ON, Green Flashing: Low Voltage Pre-Warning

Red Flashing: Emergency Stop Transmission

Red Flashing/Green Flashing at 500ms interval: Memory Error

Red Solid (on power up): Switch Error