HETRONIC NOVA L Mode d’emploi

nStart button

oKey switch

pStop button (push / pull)

qControl levers stepless

rToggle switch

sLED status display

tBattery charger with original HETRONIC battery

NOTE: Only use genuine HETRONIC parts. Not doing so

introduces the risk of serious damages and will result

in the loss of your guarantee.

Version 1.4

hetronic.de

–

•Ergonomically and ruggedly designed

•Individually configurable transmitter for a multitude of applications

•Key switch, stop button, LED status display, toggle switch, push button, battery

compartment, belly belt, 6 linear control levers maximum in Y direction with 6 proportional

functions or 2 joysticks maximum in X / Y direction with 4 proportional functions

•Receiver programming via transmitter possible (Quick-Set)

•Standard and customized solutions

•Cable control available

•Several types of feedback available (f. e. LCD, LED etc.)

•Tandem operation available

Material Polyamid with glass fibre

Weight 1600 g

Dimensions H 165/ B 235/ T 110 mm

Diagnostics Status LED

RF technology Synthesizer

RF output < 10 mW

Temperature range -25° up to +70° C

Antenna internal

Frequency range 434/869 Mhz (for EU, further

frequencies on request)

Safety address 20 bit (1 Mio.)

Protection type IP 65 (exceeds Nema 12/13)

Operating time more than 20 h possible

Power supply 3,6V DC

Attention: You have to read and understand the operating manual of the radio remote control

and the machine before operation is started!

Check the proper operation of the stop button before operating the machine.

Please check the following items each time before using the system!

;Check the transmitter for damages

;Check the function of the stop button by means of the LED status display

(transmitter ON: LED is flashing / stop button pushed: LED is flashing faster)

;When the transmitter is switched on, you will hear an acoustical signal (standard adjustment)

The transmitter may only be operated by instructed persons!

Insert a fully charged battery into the battery compartment of the transmitter.

Start the transmitter by using the key switch o. Now, the LED status display shas to flash green and

an acoustical signal will prove the system check (approx. 2 seconds).

After the system check you may start the system by activating the start button n. You can control the

designated function by activating the joysticks/control levers q, the toggle switches or the push

buttons r. The activated functions are now transmitted to the receiver. The individual functions of the

buttons are described in the enclosed drawings!

You can stop the system using the stop button p(only use in case of an emergency).

LED status display: Flashing = transmitter activated

Buzzer: A low voltage is signalised by an intermittent sound.

After approx. 30 seconds the transmitter switches off. .

Version 1.4

hetronic.de

Table des matières

Autres manuels HETRONIC Émetteur

HETRONIC

HETRONIC NOVA-M Manuel utilisateur

HETRONIC

HETRONIC ERGO-F 2.4 GHz Manuel utilisateur

HETRONIC

HETRONIC MINI Manuel utilisateur

HETRONIC

HETRONIC Pocket-MFSHL Manuel utilisateur

HETRONIC

HETRONIC NOVA S Manuel utilisateur

HETRONIC

HETRONIC NOVA-L Manuel utilisateur

HETRONIC

HETRONIC ERGO-F 2.4 GHz Manuel utilisateur

HETRONIC

HETRONIC MFSHL915 Manuel utilisateur

HETRONIC

HETRONIC NOVA-L Manuel utilisateur

HETRONIC

HETRONIC FBTX-01 Manuel utilisateur

HETRONIC

HETRONIC NOVA XL Manuel utilisateur

HETRONIC

HETRONIC NOVA XL Manuel utilisateur

HETRONIC

HETRONIC ERGO-S Manuel utilisateur

HETRONIC

HETRONIC MINI V1 Mode d’emploi

HETRONIC

HETRONIC ERGO-F 2.4 GHz Mode d’emploi

HETRONIC

HETRONIC ERGO-S Manuel utilisateur

HETRONIC

HETRONIC NOVA Series Manuel utilisateur

Manuels Émetteur populaires d'autres marques

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuel du propriétaire

Honeywell

Honeywell 5816WMBR Manuel utilisateur

Kamstrup

Kamstrup READy MTU Mode d'emploi

Omega

Omega ZW Series Manuel utilisateur

ABB

ABB Field 264H Mode d’emploi

Alinco

Alinco DJ-V17T Manuel utilisateur

Dejero

Dejero EnGo 3x Manuel utilisateur

Rosemount

Rosemount 4600 Manuel utilisateur

Speaka Professional

Speaka Professional 2342740 Manuel utilisateur

trubomat

trubomat GAB 1000 Manuel utilisateur

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuel utilisateur

Rondish

Rondish UT-11 Manuel utilisateur

MG 10JRE Manuel utilisateur

Burkert

Burkert 8177 Manuel utilisateur

Firetide

Firetide HotPort 3203 Manuel

Tele Radio

Tele Radio T9-02 Manuel utilisateur

Rotronic

Rotronic HygroFlex HF3 Series Manuel utilisateur

Jamara

Jamara FCX6 Pro Tel Manuel utilisateur