HBM Z30 Manuel utilisateur

Force Transducer with

S.G. Measurement System

Z30, Z30–G

Mounting Instructions

B 20.Z30.10 en

SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:[email protected]

SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:[email protected]

SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:[email protected]

SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:[email protected]

Z30

HBM 23.8.00

Contents Page

Safety instructions 4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

1 Scope of supply 7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2 Applicationnotes 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3 Structure and mode of operation 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.1 Measuring body 8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.2 Housing 9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3.3 Disturbance variables 9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4 Conditionson site 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.1 Ambient temperature 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.2 Moisture 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.3 Air pressure 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4.4 Chemical effects 10. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5 Mechanicalinstallation 11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.1 Important precautions during installation 11. . . . . . . . . . . . . . . . . . . . . .

5.2 General installation guidelines 11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5.3 Mounting accessories for tensile loading/compressive loading 12. . .

5.3.1 Installation drawing for compressive loading 12. . . . . . . . . . . .

6 Electrical connection 13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.1 Instructions for cabling 13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6.2 Pin assignment 13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7 Specifications 15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8 Dimensions Z30, Z30–G 17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

9 Declaration of conformity 22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:[email protected]

SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:[email protected]

4Z30

HBM 23.8.00

Safety instructions

Use in accordance with the regulations

Z30, Z30–G type force transducers are used for high-precision force

measurements and for force reference measurements (transfer standard).

Use for any additional purpose shall be deemed to be not in accordance with

the regulations.

In the interests of safety, the transducer should only be operated as described

in the Mounting Instructions. It is also essential to observe the appropriate

legal and safety regulations for the application concerned during use. The

same applies to the use of accessories.

The transducer is not a safety element within the meaning of its use as inten-

ded. Proper and safe operation of this transducer requires proper transporta-

tion, correct storage, assembly and mounting and careful operation and main-

tenance.

General dangers of failing to follow the safety instructions

The Z30, Z30–G force transducer corresponds to the state of the art and is

fail-safe. The transducers can give rise to remaining dangers if they are

inappropriately installed and operated by untrained personnel.

Everyone involved with the installation, commissioning, maintenance or repair

of a force transducer must have read and understood the Mounting Instruc-

tions and in particular the technical safety instructions.

Remaining dangers

The scope of supply and performance of the transducer covers only a small

area of force measurement technique. In addition, equipment planners,

installers and operators should plan, implement and respond to the safety

engineering considerations of force measurement technique in such a way as

to minimise remaining dangers. Prevailing regulations must be complied with

at all times. There must be reference to the remaining dangers connected with

force measurement technique.

SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:[email protected]

SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:[email protected]

Z30

HBM 23.8.00

In these mounting instructions remaining dangers are pointed out using the

following symbols:

Symbol: DANGER

Meaning:

Maximum danger level

Warns of an imminently dangerous situation in which failure to comply with

safety requirements will result in death or serious physical injury.

Symbol: WARNING

Meaning:

Dangerous situation

Warns of a potentially dangerous situation in which failure to comply with

safety requirements can result in death or serious physical injury.

Symbol: ATTENTION

Meaning:

Potentially dangerous situation

Warns of a potentially dangerous situation in which failure to comply with

safety requirements could result in damage to property or some form of

physical injury.

Symbol: NOTE

Means that important information about the product or its handling is being

given.

Symbol:

Meaning:

CE mark

The CE mark signals a guarantee by the manufacturer that his product meets

the requirements of the relevant EC directives (see Declaration of conformity

at the end of this document).

SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:[email protected]

SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:[email protected]

6Z30

HBM 23.8.00

Prohibition of own conversions and modifications

The transducer must not be modified from the design or safety engineering

point of view except with our express agreement. Any modification shall

exclude all liability on our part for any damage resulting therefrom.

Qualified personnel

These transducers are only to be installed by qualified personnel strictly in

accordance with the technical data and with the safety rules and regulations

which follow. It is also essential to observe the appropriate legal and safety

regulations for the application concerned. The same applies to the use of

accessories.

Qualified personnel means persons entrusted with the installation, fitting,

commissioning and operation of the product who possess the appropriate

qualifications for their function.

Conditions on site

Protect the transducer from damp and weather influences such as rain, snow,

etc.

Maintenance

The Z30, Z30–G force transducer is maintenance free.

Accident prevention

Although the specified nominal force in the destructive range is several times

the full scale value, the relevant accident prevention regulations from the

trade associations must be taken into consideration.

SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:[email protected]

SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:[email protected]

Z30

HBM 23.8.00

1 Scope of supply

•Force transducer Z30/Z30-G1)2)

•Operating Manual Z30, Z30–G

Accessories (not included in the scope of supply)

•DKD calibration certificate according to EN10002–3

Order no. K–CAL–FD

(Class 00 according to DIN EN10002–3 resp. ISO376 guaranteed;

Specifications see Z30-G)

•Knuckle eyes ZGW/ZGOW

for 50 N to 1000 N: Order no. 1–U1R/200kg/ZGW

for 2 kN to 10 kN: Order no. 1–U2A/1t/ZGUW

•Thrust piece

(recommended for precision measurements, for example

EN10002–3–Calibrations)

for 50 N to 1000 N: EDO3/1kN Order no. 3–9219.0741

for 2 kN to 10 kN: EDO4/50kN Order no. 3–9219.0719

•Load button

for 50 N to 1000 N: Order no. 1–U1R/200kg/ZL

for 2 kN to 10 kN: Order no. 3–9202.0140

•Cable/male connector

Connection cable Kab 139A–6, 6m, with cable socket 723 and

unterminated;

Order number: 1–KAB139A–6

Connector MS3106PEMV fitted to Kab139A;

Order number: D–MS/MONT

15–pin D–Sub connector (male) fitted to Kab139A;

Order no.: D–15D/MONT

1) Z30–G is only available in conjunction with DKD calibration carried out by HBM according to EN10002–3.

2) The calibration certificate must be ordered separately (see accessories).

SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:[email protected]

SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:[email protected]

8Z30

HBM 23.8.00

2 Application notes

Force transducer Z30:

Series Z30 precision force transducers measure tensile and compressive

forces.

They measure static and quasi-static forces with great accuracy and

reproducibility and therefore require judicious handling. You must be

particularly vigilant when transporting and installing the devices. If the

transducers are dropped or jolted, permanent damage could be caused.

Z30–G force transducers complete with DKD certificate from HBM:

Force transducer calibrated to guaranteed class 00 according to DIN

EN10002–3 or ISO / FDIS 376.

As standard these transducers are calibrated in the tensile direction. On

request they can also be calibrated in the compressive direction to DKD

standards.

The limits for permissible mechanical, thermal and electrical stresses are

stated in the specifications. Be sure to allow for them when planning, installing

and operating the measurement configuration .

SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:[email protected]

SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:[email protected]

Z30

HBM 23.8.00

3 Structure and mode of operation

3.1 Measuring body

The measuring body comprises a system of measuring springs with strain

gauges (dual-beam spring element principle).

3.2 Housing

The enclosure provides protection against splashes and minor impacts.

3.3 Disturbance variables

Torsion, bending and transverse load are disturbance variables and are

therefore to be avoided. If necessary they can be remedied with HBM

mounting accessories (chapter 5.3 ).

The effects of temperature on the zero signal (S.G. bridge and housing) and

on the sensitivity are compensated.

Changes in the ambient pressure act as additive (subtractive) forces. These

are scarcely of importance when compared with large nominal loads.

SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:[email protected]

SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:[email protected]

10 Z30

HBM 23.8.00

4 Conditions on site

4.1 Ambient temperature

The effects of temperature on the zero signal and on the sensitivity are

compensated. To achieve optimal measurement results the nominal

temperature range must be maintained. Temperature-induced measurement

errors can be caused by uneven cooling or heating (for example by radiant

heat). A radiation shield and all-round heat insulation bring about marked

improvements. They must not form a force shunt.

4.2 Moisture

Extreme humidity or a tropical climate should be avoided if this means that the

classified limit values are exceeded (degree of protection IP50 under DIN EN

60529).

4.3 Air pressure

Changes in air pressure have no effect on the force transducer since it is not

hermetically sealed.

4.4 Chemical effects

The aluminium enclosures of the transducers is protected by a powder

coating. If used in difficult environmental conditions (direct weather effects,

contact with media which encourage corrosion) additional protective

measures should be employed by the user.

SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:[email protected]

SUNSTAR自动化 http://www.sensor-ic.com/ TEL: 0755-83376489 FAX:0755-83376182 E-MAIL:[email protected]

Ce manuel convient aux modèles suivants

Table des matières

Manuels Transducteur populaires d'autres marques

Camille Bauer

Camille Bauer SINEAX F534 Manuel utilisateur

Trane

Trane KIT 16724 Instructions de montage

Lumel

Lumel P18 Manuel utilisateur

B&C Speakers

B&C Speakers DE75PTN Manuel utilisateur

MAMAC SYSTEMS

MAMAC SYSTEMS PR-243 Manuel

Mianyang Weibo Electronic

Mianyang Weibo Electronic WB Series Manuel utilisateur

ProMinent

ProMinent Dulcometer DMT Manuel utilisateur

MKS

MKS MicroPirani 925 Series Comment utiliser

WIKA

WIKA WU-20 Manuel utilisateur

Alcatel Vacuum Technology

Alcatel Vacuum Technology BARATRON 622A Manuel utilisateur

Camille Bauer

Camille Bauer SIRAX CH-5610 Manuel utilisateur

WIKA

WIKA F2802 Manuel utilisateur

Veris Industries

Veris Industries PW Series Manuel utilisateur

Simrad

Simrad ES120-7C - REV D Guide de l'utilisateur

Airmar

Airmar M260 Mode d’emploi

Spirax Sarco

Spirax Sarco ITV1030 Manuel utilisateur

halstrup-walcher

halstrup-walcher PU10 Manuel utilisateur

Balluff

Balluff BTL5-P Manuel utilisateur