HBM S2M Series Manuel utilisateur

Mounting Instructions | Montageanleitung |

Notice de montage | Istruzioni per il montaggio

English Deutsch Français Italiano

S2M

Hottinger Baldwin Messtechnik GmbH

Im Tiefen See 45

D-64239 Darmstadt

Tel. +49 6151 803-0

Fax +49 6151 803-9100

[email protected]

www.hbm.com

Mat.: 7-2001.3592

DVS: A3592-1.3 HBM: public

10.2015

EHottinger Baldwin Messtechnik GmbH.

Subject to modifications.

All product descriptions are for general information only.

They are not to be understood as a guarantee of quality or

durability.

Änderungen vorbehalten.

Alle Angaben beschreiben unsere Produkte in allgemeiner

Form. Sie stellen keine Beschaffenheits- oder Haltbarkeits

garantie dar.

Sous réserve de modifications.

Les caractéristiques indiquées ne décrivent nos produits

que sous une forme générale. Elles n'impliquent aucune

garantie de qualité ou de durablilité.

Con riserva di modifica.

Tutti i dati descrivono i nostri prodotti in forma generica e non

implicano alcuna garanzia di qualità o di durata dei prodotti

stessi.

Mounting Instructions | Montageanleitung |

Notice de montage | Istruzioni per il montaggio

English Deutsch Français Italiano

S2M

2A3592-1.3 HBM: public S2M

English

1 Safety instructions 4........................................

2 Scope of supply and equipment variants 10...................

3 General application instructions 12...........................

4 Structure and mode of operation 13...........................

4.1 Measuring body 13............................................

4.2 Strain gauge covering agent 13.................................

4.3 Disturbance variables 13.......................................

5 Conditions on site 14........................................

5.1 Ambient temperature 14.......................................

5.2 Moisture and humidity 14......................................

5.3 Deposits 15..................................................

6 Mechanical installation 16....................................

6.1 Important precautions during installation 16......................

6.2 General installation guidelines 16...............................

6.3 Mounting the S2M 19..........................................

6.3.1 Mounting with tension/compression bars 19......................

6.3.2 Mounting with direct connection 20..............................

6.3.3 Mounting with knuckle eyes 20.................................

7 Electrical connection 24......................................

7.1 Connection in a six‐wire configuration 24.........................

7.2 Connection in a four‐wire configuration 25........................

7.3 Shortening the cable 25.......................................

7.4 Extension cable 26............................................

7.5 EMC protection 26............................................

S2M A3592-1.3 HBM: public 3

8 TEDS transducer identification 27............................

9 Specifications (VDI/VDE/DKD 2638) 28........................

10 Dimensions 32..............................................

Safety instructions

4A3592-1.3 HBM: public S2M

1 Safety instructions

Designated use

The force transducers in the type series S2M are solely

designed for measuring static and dynamic tensile and/or

compressive forces within the load limits specified by the

technical data for the respective maximum capacities.

Any other use is not the designated use.

To ensure safe operation, the regulations in the mounting

and operating instructions, together with the following

safety rules and regulations, and the data specified in the

technical data sheets, must be complied with. It is also

essential to observe the applicable legal and safety regu

lations for the application concerned.

The force transducers are not intended for use as safety

components. Please also refer to the section: “Additional

safety precautions". Proper and safe operation of force

transducers requires proper transportation, correct stor

age, siting and mounting, and careful operation.

Loading capacity limits

The data in the technical data sheet must be complied

with when using the force transducer. In particular, the

respective maximum loads specified must never be

exceeded. The following limits set out in the technical

data sheets must not be exceeded

SLimit loads

SLateral load limits

SBreaking loads

SPermissible dynamic loads

STemperature limits

Safety instructions

S2M A3592-1.3 HBM: public 5

SLimits of electrical loading capacity

Please note that when several force transducers are

interconnected, the load /force distribution is not always

uniform.

Use as a machine element

The force transducers can be used as machine ele

ments. When used in this manner, it must be noted that,

to favor greater sensitivity, the force transducer was not

designed with the safety factors usual in mechanical

engineering. Please refer here to the section “Loading

capacity limits" and to the specifications.

Accident prevention

The prevailing accident prevention regulations must be

taken into account, even though the nominal (rated) force

values in the destructive range are well in excess of the

full scale value.

Additional safety precautions

The force transducers cannot (as passive transducers)

implement any (safety‐relevant) cutoffs. This requires

additional components and constructive measures for

which the installer and operator of the plant is respons

ible.

In cases where a breakage or malfunction of the force

transducer would cause injury to persons or damage to

equipment, the user must take appropriate additional

safety precautions that meet at least the requirements of

applicable safety and accident prevention regulations

(e.g. automatic emergency shutdown, overload protec

tion, catch straps or chains, or other fall protection).

Safety instructions

6A3592-1.3 HBM: public S2M

The layout of the electronics conditioning the measure

ment signal should be such that measurement signal fail

ure does not cause damage.

General dangers of failing to follow the safety

instructions

The force transducers are state‐of‐the‐art and reliable.

There may be risks involved if the transducers are moun

ted, sited, installed and operated inappropriately, or by

untrained personnel. Every person involved with siting,

starting‐up, operating or repairing a force transducer

must have read and understood the mounting instruc

tions and in particular the technical safety instructions.

The force transducers can be damaged or destroyed by

non‐designated use of the force transducer or by

non‐compliance with the mounting and operating instruc

tions, these safety instructions or any other applicable

safety regulations (BG safety and accident prevention

regulations) when using the force transducers. Force

transducers can break, particularly in the case of over

loading. The breakage of a force transducer can also

cause damage to property or injury to persons in the

vicinity of the force transducer.

If force transducers are not used according to their desig

nated use, or if the safety instructions or specifications in

the mounting and operating instructions are ignored, it is

also possible that the force transducer may fail or mal

function, with the result that persons or property may be

affected (due to the loads acting on or being monitored

by the force transducer).

The scope of supply and performance of the transducer

covers only a small area of force measurement techno

logy, as measurements with (resistive) strain gauge

sensors presuppose the use of electronic signal condi

tioning. In addition, equipment planners, installers and

Safety instructions

S2M A3592-1.3 HBM: public 7

operators should plan, implement and respond to the

safety engineering considerations of force measurement

technology in such a way as to minimize residual

dangers. On‐site regulations must be complied with at all

times.

Important instructions for your safety are specifically

identified. It is essential to follow these instructions in

order to prevent accidents and damage to property.

Symbol Significance

WARNING This marking warns of a potentially dangerous

situation in which failure to comply with safety

requirements can result in death or serious physical

injury.

CAUTION This marking warns of a potentially dangerous

situation in which failure to comply with safety

requirements can result in slight or moderate physical

injury.

Notice This marking draws your attention to a situation in

which failure to comply with safety requirements can

lead to damage to property.

Important

This marking draws your attention to important

information about the product or about handling the

product.

Tip

This marking indicates application tips or other

information that is useful to you.

Conversions and modifications

The transducer must not be modified from the design or

safety engineering point of view except with our express

agreement. Any modification shall exclude all liability on

our part for any damage resulting therefrom.

Safety instructions

8A3592-1.3 HBM: public S2M

Maintenance

The S2M force transducer is maintenance free.

Disposal

In accordance with national and local environmental pro

tection and material recovery and recycling regulations,

old transducers that can no longer be used must be dis

posed of separately and not with normal household

waste.

If you need more information about disposal, please con

tact your local authorities or the dealer from whom you

purchased the product.

Qualified personnel

Qualified personnel means persons entrusted with siting,

mounting, starting up and operating the product, who

possess the appropriate qualifications for their function.

This includes people who meet at least one of the three

following requirements:

SKnowledge of the safety concepts of automation tech

nology is a requirement and as project personnel, you

must be familiar with these concepts.

SAs automation plant operating personnel, you have

been instructed how to handle the machinery. You are

familiar with the operation of the equipment and tech

nologies described in this documentation.

SAs system startup engineers or service engineers,

you have successfully completed the training to qual

ify you to repair the automation systems. You are also

authorized to activate, ground and label circuits and

equipment in accordance with safety engineering

standards.

Autres manuels pour S2M Series

Table des matières

Langues :

Manuels Transducteur populaires d'autres marques

Camille Bauer

Camille Bauer SINEAX F534 Manuel utilisateur

Trane

Trane KIT 16724 Instructions de montage

Lumel

Lumel P18 Manuel utilisateur

B&C Speakers

B&C Speakers DE75PTN Manuel utilisateur

MAMAC SYSTEMS

MAMAC SYSTEMS PR-243 Manuel

Mianyang Weibo Electronic

Mianyang Weibo Electronic WB Series Manuel utilisateur

ProMinent

ProMinent Dulcometer DMT Manuel utilisateur

MKS

MKS MicroPirani 925 Series Comment utiliser

WIKA

WIKA WU-20 Manuel utilisateur

Alcatel Vacuum Technology

Alcatel Vacuum Technology BARATRON 622A Manuel utilisateur

Camille Bauer

Camille Bauer SIRAX CH-5610 Manuel utilisateur

WIKA

WIKA F2802 Manuel utilisateur

Veris Industries

Veris Industries PW Series Manuel utilisateur

Simrad

Simrad ES120-7C - REV D Guide de l'utilisateur

Airmar

Airmar M260 Mode d’emploi

Spirax Sarco

Spirax Sarco ITV1030 Manuel utilisateur

halstrup-walcher

halstrup-walcher PU10 Manuel utilisateur

Balluff

Balluff BTL5-P Manuel utilisateur