Graco NAUTILUS Manuel utilisateur
© 2008 Graco ISPC127CB 10/08
READ THIS MANUAL
Do not install or use this child restraint until you read and understand the instructions in this manual.
FAILURE TO PROPERLY USE THIS CHILD RESTRAINT INCREASES THE RISK OF SERIOUS
INJURY OR DEATH IN A SUDDEN STOP OR CRASH.
Child Restraint/Booster Seat
Owner’s Manual
2
Table of Contents
1.0 Warnings to Parents and Other Users
........................4
2.0 Registration Information .........5
2.1 Register Your Child Restraint 5
2.2 Recall Information..........5
2.3 If You Need Help ..........5
3.0 Features ...................6-7
4.0 Assembling the Child Restraint 8-12
5.0 Important Information .......13-14
6.0 Height and Weight Limitations . . .15
6.1 WITH Built-in Harness......15
6.2 WITHOUT Built-in Harness . .16
6.3 WITHOUT Back Support....17
7.0 Choosing an Appropriate Vehicle
Seat Location ...............18
7.1 Vehicle Seat Location Requirements
.......................18
7.2 Vehicle Seat Belt Requirements
......................19
7.3 SAFE Vehicle Seat Belt
Systems ................19
7.4 For Built-in Harness Only . . .20
7.5 WITH or WITHOUT Built-in
Harness ....................21
7.6 To Install Locking Clip ......22
7.7 UNSAFE Vehicle Belt Systems
.....................23-24
8.0 UAS (Universal Anchorage System)
........................25
9.0 Using Child Restraint WITH Built-in
Harness .................26-31
10.0 Securing the Child Restraint in Your
Vehicle .....................32
10.1 Using a Child Restraint WITH a
Built-in Harness ..........32
10.2 With a Vehicle Lap or
Lap/shoulder belt ......32-33
10.3 With UAS ............34-35
11.0 Securing Your Child in the
Child Restraint ............36-37
3
Table of Contents (cont.)
12.0 Harness Removal .........38-42
13.0 Using Your Child Restraint WITHOUT
Built-in Harness ...........43-45
14.0 Securing Child & Booster Seat in . .
Vehicle ....................46
15.0 Adjusting Head Support........47
16.0 Removing Back Support ....48-50
17.0 Securing Child in Vehicle Belt with
Shoulder Belt Positioning Clip 51-54
18.0 Using the Tether..............55
18.1 Storing UAS and Tether....56
19.0 Airplane Use ................57
20.0 Accessories .................58
21.0 Recline Foot ................59
22.0 Care and Maintenance ........60
23.0 To Remove Seat Cover ........61
24.0 Owners Manual Storage .......63
25.0 Replacement Parts and Warranty 64
4
1.0 Warnings to Parents and Other Users
Failure to properly use this child restraint increases the risk of serious injury or death in a sharp
turn, sudden stop or crash. Your child’s safety depends on you installing and using this child
restraint correctly.
Even if using this child restraint seems easy to figure out on your own, it is very important to READ
THE OWNER’S MANUAL and the vehicle owner’s manual.
Your child’s safety depends on:
1. Choosing the correct mode of use for the child restraint depending on your child’s size.
2. Inserting the harness straps (if needed) in the proper slots for your child.
3. Selecting a suitable location for the child restraint in your vehicle.
4. Properly routing the vehicle seat belt or UAS.
5. Properly securing the child restraint in the vehicle using a seat belt designed to restrain
both the child restraint and your child or by using UAS. Many seat belts are NOT safe to use
with this child restraint, even though they can easily be threaded through or around the child
restraint!
6. Properly securing your child in the child restraint.
5
2.0 Registration Information
Model Number:
Manufactured in:
Purchase Date:
2.1 Register Your Child Restraint
Please fill in the above information. The model
number and manufactured in (date) can be found
on a label underneath your child restraint. Fill out
the prepaid registration postcard attached to the
harness and mail it today.
Child restraints could be recalled for safety reasons.
You must register this restraint to be reached in a
recall. Send your name, address, and the restraint’s
model number and manufacturing date to:
Elfe Juvenile Products
5171 Thimens
Saint-Laurent, QC H4R 3C6
or call 1-800-667-8184
or 514-344-3533 in Montreal
2.2 For Recall Information
Please contact our Customer Service
Department with any questions you may
have concerning parts, use, or
maintenance. When you contact us, please
have your product’s model and manufac-
tured in (date) ready so that we may help
you efficiently. These numbers can be
found on a label on the underside of your
child restraint.
1-800-667-8184 or www.elfe.net
In Montreal: 514-344-3533
• Call Customer Service at 1-800-667-8184
(514-344-3533 in Montreal)
• www.elfe.net
2.3 If You Need Help
6
3.0 Features
Crotch strap
Harness buckle
Harness
clip
Vehicle belt
guide
Cupholder Harness
adjuster
lever
(above strap)
Adjustment
strap
Harness
covers
Harness slots
Height adjust
button
Shoulder belt guide
Recline
handle
Storage compartment
(one on each side)
Body support
Head
support
Recline
foot
Back
support
7
UAS
Tether
storage bar
Release
buttons
Harness slots
(behind straps)
UAS
adjuster
Harness
straps
Locking
clip
Tether
strap
Red Rollers
(behind straps)
Strap
guides
(behind straps)
UAS
UAS
storage bars
(on each side
of seat)
The locking clip is stored
on the back of the child
restraint. You will need
to use it with certain
types of vehicle seat
belts.
Canada Motor Vehicle
Safety Standards have
defined a new system
for installing car seats in
vehicles. The system is
called UAS* (Universal
Anchorage System).
* UAS may be used IN
PLACE of vehicle belt
ONLY if vehicle is
equipped with UAS
anchor points.
Please refer to
vehicle owner’s
manual for UAS
locations.
8
1. Lay child restraint flat on back. Grab seat pad
fabric in sitting area to expose the gutters .
MAKE SURE all hands, fingers and other objects
are clear of the gutters.
2. MAKE sure the harness straps are securely
attached within the “T”-shaped slots around the
arms as shown .
With your other hand, raise seat back so that
both arms LOCK into the gutters .
KEEP GUTTERS CLEAR
KEEP GUTTERS CLEAR
Arm
Harness Strap
T-slot
4.0 Assembling the Child Restraint
Adult assembly required.
9
3. Arms should CLICK into the gutters.
Seat assembly should appear as shown .
CLICK!
10
4. Attach 4 elastic loops from the seat pad under
the seat exactly as shown in .
5. Pull elastic loop on the seat pad through the
vehicle belt guide on side of seat and attach to
hook as shown . Repeat on other side.
Autres manuels pour NAUTILUS
8
Table des matières
Autres manuels Graco siège auto
Graco
Graco BeLogic Manuel utilisateur
Graco
Graco 8689HOU Manuel utilisateur
Graco
Graco 4EVER DLX SNUGLOCK Manuel utilisateur
Graco
Graco True3Fit LX Manuel utilisateur
Graco
Graco Assure Manuel utilisateur
Graco
Graco SNUGRIDE 35 LITE LX Manuel utilisateur
Graco
Graco Car Booster Seat Manuel utilisateur
Graco
Graco NAUTILUS Child Restraint/Booster Seat Manuel utilisateur
Graco
Graco AVOLVE Manuel utilisateur
Graco
Graco 4EVER EXTEND2FIT Manuel utilisateur
Graco
Graco NAUTILUS Elite Manuel utilisateur
Graco
Graco Car Booster Seat Manuel utilisateur
Graco
Graco PD141229A Manuel utilisateur
Graco
Graco Extend2Fit Fiche technique
Graco
Graco STE 4331 Mode d’emploi
Graco
Graco DuoLogic2 Manuel utilisateur
Graco
Graco Child Restraint Manuel utilisateur
Graco
Graco My Ride 65 Manuel utilisateur
Graco
Graco SnugRide SnugLock 30 Manuel utilisateur
Graco
Graco 35 ELITE Manuel utilisateur
