GIRA
Info Hand-held radio transmitter
Installation Instructions
Hand-held radio transmitter 15/01 Page: 5 of 10
ABC
1
2
3
4
5
6
7
8
>
<
Clearing an assigned channel
Programming of the same lightscape into the
receiver clears the existing lightscape.
Programming of the same channel into the re-
ceiver clears the existing assignments of channel,
lightscape and the All-ON or All-OFF keys (see
"Programming of radio receivers").
All-ON/All-OFF keys
When a channel is programmed, the All-ON
and the die All-OFF key are automatically
stored in the receiver (exception: radio louver
control attachment).
The All-ON key is used to switch the load of all
assigned receivers on, and the All-OFF key to
switch it off.
To execute the assigned function, the All-ON or
All-OFF key must be depressed for at least 1
second.
These actions are confirmed by all group LEDs
lighting up for approx. 12 seconds.
Changing the All-ON / All-OFF function
Example:
You want to exclude one of the receivers
(bathroom lighting) from responding when the All-
ON key is depressed, whereas all other receivers
are to switch on their respective lights.
Procedure
1. Depress the All-ON key for at least 1second.
All assigned receivers are switched on.
2. Choose the lighting as you would like to have it
when you depress the All-ON key next time.
Since all the receivers (lights) are already on,
the only thing you have to do now is to switch
off the light in the bathroom
3. Depress the All-ON key for at least 10 seconds
to store this setting.
Important:
At first, the old setting is recalled (keep the key
depressed). After about 10 seconds, the new
setting is activated and stored.
