Gigabyte GA-8GPNXP Duo Manuel utilisateur

GigaRAID (IT8212) ATA RAID Controller

USER’S MANUAL

12ME-IT8212-006R

may be reproduced or transmitted in any from without the expressed, written

permission of GBT.

Trademarks

Third-party brands and names are the property of their respective owners.

Notice

Due to rapid change in technology, some of the specifications might be out of date

before publication of this booklet.

The author assumes no responsibility for any errors or omissions which may appear

in this document nor does it make a commitment to update the information contained

herein.

Contents

Introduction ................................................................................................................4

Features ...........................................................................................................5

What is the GigaRAID (IT8212) ATA RAID Controller.......................................6

Quick Start .................................................................................................................7

Create Your Disk Array .....................................................................................9

Setup Utility..............................................................................................................15

Using the GigaRAID (IT8212) ATA RAID Controller Setup Utility....................15

Auto Configuration..........................................................................................17

Define RAID....................................................................................................22

Delete RAID....................................................................................................28

Rebuild RAID..................................................................................................31

RAID Card Configuration................................................................................36

Driver Installation .....................................................................................................38

Windows XP ...................................................................................................39

Windows 2000................................................................................................45

Windows SE/ME.............................................................................................53

Windows NT ...................................................................................................61

Linux...............................................................................................................69

Install the GigaRAID (IT8212) ATA RAID Controller on Red Hat 7.3 ........................69

Application ...............................................................................................................72

Installation ......................................................................................................72

Functions Description .....................................................................................75

How to….........................................................................................................86

Q&A .........................................................................................................................88

GigaRAID (IT8212) ATA RAID Controller USER’S MANUAL

Introduction

This manual is mainly to help users setup the GigaRAID (IT8212) ATA RAID

Controller and solve problems when they use it.

If it is your first time to use the GigaRAID (IT8212) ATA RAID Controller and you are

about to install it, please refer to the “Quick Start” section on page 7. After finishing

installing it, you can get the advantages of enhancing the performance and raising

the system’s reliability.

When you face any difficulties and find anything you don’t understand while using the

GigaRAID (IT8212) ATA RAID Controller, please refer to the “Q&A” section on page

88. In this section, you can refer to the problems users may face and find the correct

solutions. You can follow its instructions to solve your problems and then you will get

satisfactory results.

GigaRAID (IT8212) ATA RAID Controller USER’S MANUAL

Features

 Compatible with the ATA133 specification and supports two IDE channels with

4 drives.

 Supports ANSI ATA proposal PIO modes 0,1,2,3,4 with flow control, DMA

Modes 0,1,2,3,4,5,6.

 512 bytes FIFO for auto transfer per IDE channel to get a high performance

 Supports the RAID 0/1/0+1 function

 Supports the JBOD function

 Supports the Scatter/Gather function for the DMA/UDMA function

 Includes one embedded CPU and firmware on system to handle the RAID

function. It can reduce the driver’s loading of system CPU and improve the

system’s ability.

 Low CPU utilization based on a local processor architecture

 Compatible with PCI Local bus specification v2.2. Users can easily install our

systems to your PCs.

 Supports PCI power Management v1.0 to reduce power consumption.

 Supports the drivers for windows 98SE/Me/XP, Windows NT 4.0, Windows

2000 and Linux v2,4,1,0

GigaRAID (IT8212) ATA RAID Controller USER’S MANUAL

What is the GigaRAID (IT8212) ATA RAID Controller

This GigaRAID (IT8212) ATA RAID Controller is an excellent product resulting from

Soc concept. It includes one RAID Chip combining CPU, firmware, advanced PCI

controller and IDE controller. Its architecture can provide users a RAID system with

low CPU utilization. When a PC is in high CPU operation or PCI traffic, users won’t

have any penalties for installing RAID system. This is because this system embeds a

local CPU to deal with the RAID function and it’s unnecessary to share CPU’s

performance. It is entirely different from the traditional software RAID system.

Similarly, it also provides users more system stability. It provides users high speed

and integration and low price PC RAID system. Additionally, it also provides PCI

33MHz interface and is compatible with PCI spec. v2.2. It can be easily installed into

the PC system nowadays. Besides, we provide each OS a corresponding driver so

that users don’t have to worry that your systems and the IDE RAID system have any

compatibility issue.

This GigaRAID (IT8212) ATA RAID Controller can support IDE drivers ranging from

the lowest speed of PIO mode drive to the highest speed of ATA/133 drive. Thus,

users can use this characteristic to combine RAID system without any limitations.

Users can use ATA/133 drive and RAID function to achieve the best performance and

get the merit of system’s stability.

The GigaRAID (IT8212) ATA RAID Controller can support the RAID0 (striping),

RAID1 (mirroring), RAID0+1 (striping and mirroring) or JBOD (spanning) mode.

When a system is programmed to the RAID0 mode, it can read or write two drivers at

the same time to enhance the performance. When a system is programmed to the

RAID1 mode, two drivers have the same data and it will prevent data from being

damaged. Once data is damaged, the system will start the rebuild function

automatically and save data back to another new drive. Similarly, this system can use

GigaRAID (IT8212) ATA RAID Controller USER’S MANUAL

this data-copying characteristic to let two drivers transmit at the same time and

balance the performance to raise throughput. The RAID0+1 mode uses four drivers

to get the merits of RAID0 and RAID1. As for the JBOD mode, it combines more than

two drives into a drive with a large capacity. This mode does not have the RAID

function and its merit.

Quick Start

This section leads you to quickly establish your RAID system with default settings.

The default settings can meet most people’s requirements. If you need more

advanced optimal, please refer to Setup Utility on page 15 to achieve your goal.

Warning: In order to prevent any data loss resulting from

inappropriate operation, please backup data before you start to

install your system.

GigaRAID (IT8212) ATA RAID Controller USER’S MANUAL

The hard drives which are required for the installation

The hard drives, which are connected on the GigaRAID (IT8212) ATA RAID Controller,

can support Ultra ATA/ 133, Ultra ATA/ 100, Ultra ATA/ 66, Ultra ATA/33, EIDE or Fast

ATA-2 drives. Nevertheless, for the best performance, it is suggested that you had

better use the hard drives of the same type and capacity to establish your own RAID

system. After getting ready for the hard drives, you can follow the procedures below

to install the system.

1. Exactly set up every hard drive’s master and slave setting to assure that the

hard drives can surely action and unnecessarily incorrect action of data access

won’t occur.

2. Exactly insert the hard drive’s cables into the connectors on the hard drive and

check if it’s really firmly inserted.

3. Insert every power cable connector into the corresponding hard drive and

check if it’s firmly inserted in a correct direction.

Warning: Because this system can support the hard drives of

Ultra ATA/133, it is suggested that you can use the 80-wire,

40-pin cable to connect the GigaRAID (IT8212) ATA RAID

Controller and hard drives in order to assure the system’s ability

and efficiency. If the cable is damaged after a period of time, it is also

suggested to buy the cable of the same specification.

GigaRAID (IT8212) ATA RAID Controller USER’S MANUAL

Create Your Disk Array

You can create your own array using the onboard BIOS utility of the

GigaRAID (IT8212) ATA RAID Controller with the attached hard drives. Please follow

the steps below to setup your disk array.

Warning: Please backup data in your hard drives to prevent data

damage resulting from the unfamiliarity with the operation.

1. Boot your system

Please attach your hard drives to the GigaRAID (IT8212) ATA RAID Controller,

boot your system and then you will see the following message shown by the

GigaRAID (IT8212) ATA RAID Controller onboard BIOS on the screen.

GigaRAID (IT8212) ATA RAID Controller USER’S MANUAL

Please press “Ctrl-G” keys to enter the BIOS utility Main Menu. The screen below will

be shown.

Autres manuels pour GA-8GPNXP Duo

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Gigabyte Matériel informatique

Gigabyte

Gigabyte U7300 Manuel

Gigabyte

Gigabyte H610M D2VX SI DDR4 Manuel utilisateur

Gigabyte

Gigabyte GT-U7100 Manuel utilisateur

Gigabyte

Gigabyte GC-WIFI7 Manuel utilisateur

Gigabyte

Gigabyte GT-P5100 Manuel utilisateur

Gigabyte

Gigabyte 3D Cooler Manuel utilisateur

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuel utilisateur

Gigabyte

Gigabyte GH-PCU23-VE Manuel utilisateur

Gigabyte

Gigabyte GT-PTV-TAF-RH Manuel utilisateur

Gigabyte

Gigabyte R183-ZF0-AAJ1 Manuel utilisateur

Gigabyte

Gigabyte GC-WBAX210 Manuel utilisateur

Gigabyte

Gigabyte GH-PDU22-SC Manuel utilisateur

Gigabyte

Gigabyte 3D Galaxy II GH-WIU02 Manuel utilisateur

Gigabyte

Gigabyte NVIDIA N730D5-2GL Manuel utilisateur

Gigabyte

Gigabyte Adaptec 7902W chip Guide rapide

Gigabyte

Gigabyte Z690 AORUS ELITE STEALTH Manuel utilisateur

Gigabyte

Gigabyte BRIX Pro Manuel utilisateur

Gigabyte

Gigabyte R133-X11-AAB1 Manuel utilisateur

Gigabyte

Gigabyte X570 AORUS MASTER Manuel utilisateur

Gigabyte

Gigabyte TO23-H60 Manuel utilisateur

Gigabyte

Gigabyte Z390 I AORUS PRO WIFI Manuel utilisateur

Gigabyte

Gigabyte GSmart MD800 Manuel utilisateur

Gigabyte

Gigabyte U7300 Manuel utilisateur

Gigabyte

Gigabyte AORUS GP-ASACNE6200TTTDA Manuel utilisateur

Manuels Matériel informatique populaires d'autres marques

EMC2

EMC2 VNX Series Manuel du propriétaire

Panasonic

Panasonic DV0PM20105 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur

Raidon

Raidon iT2300 Manuel utilisateur

National Instruments

National Instruments PXI-8186 Manuel utilisateur

Hauppauge

Hauppauge WinTV-HVR-2250 Manuel utilisateur

Kontron

Kontron CP6002 Manuel utilisateur

Manhattan

Manhattan 702843 Manuel utilisateur

Aphex

Aphex 230 Manuel utilisateur

AMD

AMD Phenom II Manuel d'exploitation

Intel

Intel NUC 12 Pro Manuel utilisateur

dbx

dbx Zone Pro 1260 Manuel utilisateur

Galaxy

Galaxy GHDX2-2430S-24F4D Manuel utilisateur

Intel

Intel AXXRMFBU4 Manuel utilisateur

Kontron

Kontron DIMM-PC/MD Manuel utilisateur

ST X-NUCLEO-SAFEA1B Mode d'emploi

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuel utilisateur

Advantech

Advantech ASMB-935 Series Manuel utilisateur