Genius N5000 Instructions de montage

Table des matières

Autres manuels Genius Souris

Genius

Genius NAVIGATOR 905BT Manuel utilisateur

Genius

Genius ERGO 720 LASER Manuel utilisateur

Genius

Genius GX Gaming Series Manuel utilisateur

Genius

Genius NAVIGATOR 805 Manuel utilisateur

Genius

Genius ERGO 525V LASER Manuel utilisateur

Genius

Genius ERGO 300 Manuel utilisateur

Genius

Genius TRAVELER 915BT LASER - Manuel utilisateur

Genius

Genius NAVIGATOR 365 LASER Manuel utilisateur

Genius

Genius TRAVELER 100 Manuel utilisateur

Genius

Genius NAVIGATOR 635 LASER Manuel utilisateur

Genius

Genius Bluetooth Traveler Manuel utilisateur

Genius

Genius ERGO T555 LASER Manuel utilisateur

Genius

Genius NETSCROLL 100 Manuel utilisateur

Genius

Genius ERGO R815 Manuel utilisateur

Genius

Genius MT900BT Manuel

Genius

Genius NAVIGATOR 900 PRO Manuel utilisateur

Genius

Genius NAVIGATOR 500 Manuel utilisateur

Genius

Genius X-G510 Manuel utilisateur

Genius

Genius TRAVELER 220 LASER Manuel utilisateur

Genius

Genius NAVIGATOR 905BT Manuel utilisateur

Genius

Genius TRAVELER 320 Manuel utilisateur

Genius

Genius X-G300 Manuel utilisateur

Genius

Genius Micro Traveler 900LS Manuel utilisateur

Genius

Genius TRAVELER 1000 Manuel utilisateur

Manuels Souris populaires d'autres marques

Sven

Sven RX-G720 Manuel utilisateur

3DConnexion

3DConnexion CadMouse Pro Manuel utilisateur

Canyon

Canyon Puncher GM-20 Manuel utilisateur

Sharkoon

Sharkoon Light2 180 Manuel utilisateur

Cherry

Cherry MW 8C ERGO Manuel utilisateur

NGS

NGS HIT RB Manuel utilisateur

Sharkoon

Sharkoon FireGlider Manuel utilisateur

Lenovo

Lenovo Wireless Mouse N3902 Manuel utilisateur

BASETech

BASETech BN-S11 Manuel utilisateur

Dell

Dell WM326 Manuel utilisateur

Areson

Areson B213 Manuel utilisateur

HP

HP M17587-371 Manuel utilisateur

Chatpen

Chatpen CHA-30 Manuel utilisateur

GAMDIAS

GAMDIAS DEMETER GMS5000 Manuel utilisateur

HP

HP KJ453AA - Wireless Laser Mouse Manuel utilisateur

Trust

Trust GRAPHIN GXT 960 Manuel utilisateur

Lenovo

Lenovo SD-9082 Manuel utilisateur

Alienware

Alienware AW320M Manuel utilisateur

Hardware Installation

1. You can connect the receiver to a USB port of a PC

2. Install two AA batteries in the mouse.

3. Turn on your computer.

4. After you open Windows, please press the button on the receiver first and then

press the button under the mouse for channel setting.

Important: Remember do not put the batteries in the wrong direction, use the same

types of batteries. Also, keep all drinks away! If any spill occurs on the receiver,

unplug the USB connector first and clean the receiver immediately. Please switch the

button to "off" under the mouse once you don't use it for a long time, and remove the

batteries if you do not use this device for at least two weeks.

Warning: (Troubleshooting)

1. Please do not use wireless optical mouse on a desk which is made of glass, mir-

ror, iron, or black velvet. Also, a flat surface is necessary or the optical sensor

will error easily. When you use wireless optical mouse on a desk that is made of

metal, try using a pad and reduce the receiving distance.

2. Before the first installation is completed (channel setting ready), the mouse will

not work in DOS.

3. The wireless optical mouse channel provides 256 ID-codes, and it automatically

selects the ID # for your mouse. You can only set up one wireless optical mouse

at a time. But if you have additional wireless optical mouse sets in an area of 10

square meters, more interference will occur between the receiver and your

mouse.

4. If you feel the mouse does not move smooth as usual, then the batteries have lost

their charge, so please replace them.

5. The wireless optical mouse with radio frequency gives you free movement and

an enjoyable experience. For optimal performance, place the receiver at least 8

inches (about 20 cm) away from the mouse and other electrical devices, such as

the computer, monitor, and etc.

1

ENGLISH

Software Installation

1. Make sure the mouse is connected to the computer.

2. Put the Setup disk (or CD) into the disk drive.

3. Follow the instructions on the screen to finish the software installation.

Factory Setting

Changing the Faceplate

Push the button underneath

the mouse towards the front,

and the faceplate will pop off

Button Assignments

1. Left Button: Provides traditional mouse functions

like click, double click and drag.

2. Right Button: You can assign this button to fre-

quently used keyboard and mouse functions in ad-

dition to features like Easy Jump, Auto-Panning,

Zoom, etc.

3. Magic-Roller: Press the “Magic-Roller” to surf

the Internet and Windows documents.

4. Back: See previous page when viewing the Inter-

net.

5. Forward: Go to next page when viewing the

Internet.

6. Application Switch: You can switch between ac-

tive programs and documents.

Button Assignments

2