Genie ZD49IR Manuel utilisateur
USER MANUAL
DNR TRUE DAY&NIGHT CAMERA
ZD49IR
DNR TRUE DAY & NIGHT COLOUR CAMERA DNR TRUE DAY & NIGHT COLOUR CAMERA
-1-
Contents
Specication
Installation
How To Install
Safety Instruction
General Features
Menu Set Up
Exit
Trouble Shooting
► Lens
► Shutter Speed
► White Balance
► Back Light(BLC)
► Auto Gain Control
► DNR
► Sens - Up
► Special
♦ Camera ID
♦ Colour
♦ Sync
♦ Motion Detection
♦ Privacy
♦ Mirror
♦ Sharpness
♦ Reset
♦ Return
1
2
3
4
5
6
7
8
10
11
12
13
14
15
16
16
18
19
19
20
20
21
21
21
21
22
DNR TRUE DAY & NIGHT COLOUR CAMERA DNR TRUE DAY & NIGHT COLOUR CAMERA
-3-
CAMERA OPERATION
LENS
SHUTTER
(Condition & Speed Control)
WHITE BALANCE
BACK LIGHT
(Backlight Compensation)
AGC
(Auto Gain Control)
DNR
(Digital Noise Reduction)
SENS-UP (Low illuminance)
SPECIAL
EXIT
(SET-UP UP DOWN LEFT RIGHT)
●DC ●MANUAL
●FLK
●MANUAL ●ESC
●ATW
●AWC
●MANUAL
●OFF
●AUTO
●OFF
●LOW
●MIDDLE
●HIGH
●OFF
●LOW
●MIDDLE
●HIGH
●OFF
●LOW
●MIDDLE
●HIGH
●CAMERA ID
●COLOUR
●SYNC
●MOTION DETECTION ●PRIVACY
●MIRROR
●SHARPNESS
●RESET
●RETURN
The IR range shown below are maximum distances that can be achieved using this camera.
The environment and camera positioning both affect IR performance.
◈ SETTINGS
Settings can be made using the OSD buttons
located on the bottom of the camera.
(Adjust the IR Control Volume, using a screwdriver,
to increase or decrease the IR brightness level.)
OSD
CAMERA TITLE
WHITE BAL
BACKLIGHT
MOTION DET
FOCUS
EXPOSURE
SPECIAL
RESET
EXIT
DC
ATW
OFF
ON
D-ZOOM
SENS-UP
PRIVACY
OSD Control Board
DC Auto Iris Varifocal Lens
(4mm-9mm)
DC Auto Iris Varifocal Lens
(4mm-9mm)
DNR TRUE DAY & NIGHT COLOUR CAMERA DNR TRUE DAY & NIGHT COLOUR CAMERA
-4-
* Camera Adjustment
①Connect Video & Power Line (AC 24V or DC 12V Regulated Power)
②Position the camera for the correct angle of view.
③Loosen the locking screws and focus the camera.
④Re-tighten the locking screws.
DC Auto Iris Varifocal Lens
(4mm-9mm)
DNR TRUE DAY & NIGHT COLOUR CAMERA DNR TRUE DAY & NIGHT COLOUR CAMERA
-5-
Precautions for use
☞Please read this manual thoroughly before using this camera to become familiar with the correct
operational procedures.
Warranty
☞
This camera is supplied with three year warranty effective from the day of purchase on a return to
base basis(RTB).
Our standard Return Procedure needs to be followed for warranty repairs.
☞ Keep the camera box and packing in case the product needs to be returned.
Cautions When Using
☞ Do not open the camera body and touch any electrical parts to avoid possible electric shocks.
☞ Do not insert objects into the camera body to prevent re hazards and electric shock.
☞ Do not touch the camera with wet hands to avoid electric shock.
☞ Do not disconnect the power cord from a power plug when still connected to the outlet.
☞ Always disconnect the power by removing the plug from the power socket.
☞ If the camera emits a burning smell, immediately disconnect it from the power source and report
the problem to your distributor.
Cautions When Install
☞ Only apply power after installation of the product.
☞ Do not install the camera in a position facing directly at strong light source.
☞ Do not install or use the camera in areas of high humidity.
☞ Do not install near any cooling or heating equipment.
☞ Do not install the camera in dusty environments.
☞ Do not install the camera in places where the camera is subjected to physical shocks.
☞ This products must be used with a regulated DC 12V or AC 24V adaptor for power.
DNR TRUE DAY & NIGHT COLOUR CAMERA DNR TRUE DAY & NIGHT COLOUR CAMERA
-6-
◈DNR DSP Chip
Our DNR DSP chipset provides powerful functions and high resolution both Day and Night.
Functions include selectable white balance, selectable AGC, selectable Digital Noise Reduction,
Sens-Up, Camera ID, Privacy Zones, Mirror and Sharpness.
◈560TV Lines
The combination of DNR Technology and Sony Super HAD CCD image sensor gives an excellent
high resolution of 560 TV Lines.
◈Day & Night
Depending on luminance levels the camera switches automatically between colour and
monochrome. The camera’s IR Cut-Filter gives perfect colour rendition during the day.
◈Illumination
The advanced DSP and DNR chipsets provide clear subject detection at low luminance.
Images can be captured at extremely low light levels using the Sens-Up feature.
◈DNR( Digital Noise Reduction)
DNR technology removes the noise, especially in low light, resulting in clearer and superior
images. Ultra-high resolution even in extremely low light conditions.
◈Disk Saving Effects
DNR technology dramatically reduces recorded le size saving precious hard drive space.
File size is much smaller than standard CCTV le size.
◈Controlled by OSD menu
The camera is controlled by selecting the menu items and parameters displayed on the monitor
screen.
DNR TRUE DAY & NIGHT COLOUR CAMERA DNR TRUE DAY & NIGHT COLOUR CAMERA
-7-
CAMERA OPERATION
LENS
SHUTTER
(Condition & Speed Control)
WHITE BALANCE
BACK LIGHT
(Backlight Compensation)
AGC
(Auto Gain Control)
DNR
(Digital Noise Reduction)
SENS-UP (Low illuminance)
SPECIAL
EXIT
(SET-UP UP DOWN LEFT RIGHT)
●DC ●MANUAL
●FLK
●MANUAL ●ESC
●ATW
●AWC
●MANUAL
●OFF
●AUTO
●OFF
●LOW
●MIDDLE
●HIGH
●OFF
●LOW
●MIDDLE
●HIGH
●OFF
●LOW
●MIDDLE
●HIGH
●CAMERA ID
●COLOUR
●SYNC
●MOTION DETECTION ●PRIVACY
●MIRROR
●SHARPNESS
●RESET
●RETURN
Menu Set Up
Menu items can be selected by using the OSD buttons on the camera
I. Press the Set Up button.
The Set Up menu will be displayed on the monitor.
SETUP
LENS
SHUTTER
WHITE BAL
BACKLIGHT
AGC
DNR
SENS-UP
SPECIAL
EXIT
DC
--------
AWC
HIGH
OFF
MIDDLE
AUTO
DNR TRUE DAY & NIGHT COLOUR CAMERA DNR TRUE DAY & NIGHT COLOUR CAMERA
-8-
SETUP
LENS
SHUTTER
WHITE BAL
BACKLIGHT
AGC
DNR
SENS-UP
SPECIAL
EXIT
DC
--------
AWC
HIGH
OFF
MIDDLE
AUTO
2. Move and Select the required function using the Up and Down buttons.
● Move the status bar to select the desired feature by pressing the Up or Down buttons.
This function controls the image brightness.
I. Move the arrow indicator to LENS using the Up and Down buttons on the Set Up menu screen.
2. Select the desired lens type by pressing the Left or Right button.
3. Changing Menu Settings Using the Left or Right Buttons.
● Available values or status are displayed by pressing the Left or Right button.
Press the buttons until desired value/status is displayed.
4. After completing the setting, move the arrow indicator to EXIT and press the SET button to EXIT.
●
Move to the available submenu by moving arrow to desired feature.
●
Submenu is not available when this symbol is displayed ” -----”.
NOTE
◄┛
DNR TRUE DAY & NIGHT COLOUR CAMERA DNR TRUE DAY & NIGHT COLOUR CAMERA
-9-
SETUP
LENS
SHUTTER
WHITE BAL
BACKLIGHT
AGC
DNR
SENS-UP
SPECIAL
EXIT
DC
--------
AWC
HIGH
OFF
MIDDLE
AUTO
DC:DC Auto IRIS Lens
●
When DC is selected, the brightness can be adjusted.
Brightness control range is I - 70.
NOTE
L E N S
BRIGHTNESS
Press Set to Return
I---------I---------I 70
3. Press the SETUP button to return to the previous menu.
Table des matières
Autres manuels Genie Caméra de sécurité
Genie
Genie TPC 8922 Series Manuel utilisateur
Genie
Genie WAHD2LBV Manuel utilisateur
Genie
Genie DN83SPX/12 Manuel
Genie
Genie SSAHD2B Manuel utilisateur
Genie
Genie GSD106 Manuel utilisateur
Genie
Genie WIPX4BVAF722 Manuel utilisateur
Genie
Genie COMPACT IR BULLET CAMERA Manuel utilisateur
Genie
Genie PWIP2BV Manuel utilisateur
Genie
Genie GB83TSPXIR Manuel
Genie
Genie SSAHD2BVAF Manuel utilisateur
Genie
Genie UMD300 Series Manuel utilisateur
Genie
Genie SSAHD2LBVAF Manuel utilisateur
Genie
Genie SSAHD2D Manuel utilisateur
Genie
Genie HDED2812IR Manuel utilisateur
Genie
Genie PWIPN2EB Manuel utilisateur
Genie
Genie TPH-4000P Manuel utilisateur
Genie
Genie WIPX4FD Manuel utilisateur
Genie
Genie WIP2PTZ25P Manuel utilisateur
Genie
Genie PWIP4BVAF Manuel utilisateur
Genie
Genie Geniewatch NSD5451 Manuel utilisateur
