Gefen COMP-CAT5-148S Manuel utilisateur

1x8 Component

CAT-5 DA

USER MANUAL

www.gefen.com

Technical Support:

Telephone (818) 772-9100

(800) 545-6900

Fax (818) 772-9120

Technical Support Hours:

8:00 AM to 5:00 PM Monday through Friday PST

Write To:

Gefen Inc.

C/O Customer Service

20600 Nordhoff St.

Chatsworth, CA 91311

www.gefen.com

[email protected]

Notice

Gefen Inc. reserves the right to make changes in the hardware, packaging and any

accompanying documentation without prior written notice.

1x8 Component CAT5 DA is a trademark of Gefen Inc.

ASKING FOR ASSISTANCE

TABLE OF CONTENTS

Operation Notes

Introduction

Features

Sender Panel Descriptions

Receiver Panel Descriptions

Connecting and Operating the 1x8 Component CAT5 DA

How to Adjust the Picture

CAT5 Wiring Diagram

Speciﬁcations

Warranty

READ THESE NOTES BEFORE INSTALLING

OR OPERATING THE 1X8 COMPONENT CAT5 DA SYSTEM

• Use industry standard Category-5 (CAT-5) cable to operate the 1x8 Component CAT5

DA system. CAT-5e cable is preferred.

• Please connect all the cables between the computer and the 1x8 Component CAT5 DA

system before powering up the 1x8 Component CAT5 DA Sender unit.

• The 1x8 Component CAT5 DA units are housed in a metal box for better RF shielding.

OPERATION NOTES

Congratulations on your purchase of the ex•tend•it 1x8 Component CAT5 Distribution

Ampliﬁer. Your complete satisfaction is very important to us.

Gefen’s line of Home Theater switchers, extenders, and Distribution Ampliﬁers are de-

signed to make your A/V setup more comfortable, more productive and more affordable.

The 1x8 Component CAT5 DA allows one Component source to be distributed on up

to eight displays. The 1x8 Component CAT5 DA also extends Component signals over

330 feet using industry standard Category 5 (CAT-5) Cable. All output displays will have

mirrored images.

The ex•tend•it line offers solutions for home theater, A/V installation, data center, infor-

mation distribution, conference room presentation, school and corporate training envi-

ronments.

Our Commitment

Gefen will always offer the ﬁnest quality product at the best possible price. Included in

that price is a lifetime support from a team of outstanding engineers.

How it Works

Simply connect your Component video source to the 1x8 Component CAT5 Distribu-

tion Ampliﬁer’s input using the supplied VGA to Component cable. Then connect up to

eight Component displays to the Component CAT5 receivers over 330 feet using CAT-5

Cable. Then power the 1x8 Component CAT5 Distribution Ampliﬁer and the receivers

will get power from the CAT5. Note: Component output 1 is the primary connection and

is used for the main display. Component output 2 through 8 follow the main display. The

Component displays attached to the 1x8 Component CAT5 Distribution Ampliﬁer MUST

have the same native resolution in order to get a picture.

INTRODUCTION

FEATURES

Features

• Distributes easily up to eight Component displays

• Extends each display up to 330 feet

• Maintains 480i, 480p, 720p, 720i, and 1080i, 1080p resolutions

• Distributes and extends Component or VGA video signals

• Installs in seconds

Includes:

(1) 1x8 Component CAT5 DA

(1) 6’ VGA to Component cable

(1) 5V6A DC Power Supply

(1) Users Manual

SENDER PANEL DESCRIPTIONS

Connects to

5VDC power

supply

Video CAT5

Out 1-4 VGA to Component

Cable Input

Power LED

Video CAT5

Out 5-8

RECEIVER PANEL DESCRIPTIONS

Video

CAT5 In VGA to Component

Cable Out

Power

LED

Knob

CONNECTING AND OPERATING THE 1X8 COMPONENT CAT5 DA

How to Connect the 1x8 Component CAT5 DA to your devices

1 Connect the supplied VGAto Component cable from the Component video source into

the 1x8 Component CAT5 DASender "Comp In" port.

2Connect a CAT-5e* cable from the "CAT5 Video Outs" on the 1x8 Component CAT5

DA Sender to the "CAT5 Inputs" on the Component CAT5 Distribution Receiver. (Repeat

for each Receiver unit)

3 Connect the VGA to Component cable from the display to the "Comp Out" on the

Component CAT5 Distribution Receiver. (Repeat for each Receiver unit)

4 Plug the 5VDC power supply into the 1x8 Component CAT5 DA Sender.

HOW TO ADJUST THE PICTURE

The ﬁrst step in adjusting the video quality is to display text and a graphic on your monitor

(i.e. desktop icons). Then set your computer to the resolution that you will be using most

frequently. The dip switches are used to set the focus and sharpness of the picture to the

best possible setting. Set the dip switches to the settings that are recommended for the

different lengths of CAT5 cable (see chart below). Verify that the picture quality is to your

satisfaction. If the recommended setting does not produce a great quality picture, try using

a different dip switch setting. The trim pod next to the Component connector on the 1x8

Component CAT5 DA R allows brightness adjustments for video.

0-25 Feet All dip switches OFF for all colors.

26-100 Feet Set dip switch #1 ON all colors. 2,3,4 remain OFF.

101-200 Feet Set dip switch #2 ON all colors. 1,3,4 remain OFF.

201-300 Feet Set dip switch #3 ON all colors. 1,2,4 remain OFF.

301 Feet and Up Set dip switch #4 ON all colors. 1,2,3 remain OFF.

NOTE: The dip switches are set to the OFF position when the switch is closest to the

number or in the down position.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Gefen Extenseur

Gefen

Gefen EXT-AUD -1000 Manuel utilisateur

Gefen

Gefen EXT-WHD-1080P-LR Manuel utilisateur

Gefen

Gefen EXT-HDMI-EDIDP Manuel utilisateur

Gefen

Gefen DVI 2500HD Manuel utilisateur

Gefen

Gefen VGA-141SRN Manuel utilisateur

Gefen

Gefen EXT-VGA-CAT5-142 Manuel utilisateur

Gefen

Gefen DVI-3000HDS Manuel utilisateur

Gefen

Gefen GTV-WVGA-LR Manuel utilisateur

Gefen

Gefen ex-tend-it DVI Detective Manuel utilisateur

Gefen

Gefen ex-tend-it CAT5-1000 Manuel utilisateur

Gefen

Gefen DVI-1000HD Manuel utilisateur

Gefen

Gefen EXT-VGAAUD-CAT5-142 Manuel utilisateur

Gefen

Gefen EXT-COMPAUD-CAT5-142 Manuel utilisateur

Gefen

Gefen WUSB Manuel utilisateur

Gefen

Gefen DVI-FM1000 Manuel utilisateur

Gefen

Gefen ToolBox GTB-DPKVM-3CAT7 Manuel utilisateur

Gefen

Gefen EXT-WRS232 Manuel utilisateur

Gefen

Gefen EXT-DVIKVM-ELR Manuel utilisateur

Gefen

Gefen USB2.0-LR Manuel utilisateur

Gefen

Gefen CAT5-5600HD Manuel utilisateur

Gefen

Gefen EXT-WHD-1080P-LR-TX Manuel utilisateur

Gefen

Gefen EXT-DIGAUD-141 Manuel utilisateur

Gefen

Gefen GTB-UHD600-HBT Manuel utilisateur

Gefen

Gefen DVI-141SBP Manuel utilisateur

Manuels Extenseur populaires d'autres marques

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

SC&T

SC&T HE03-4K Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

MuxLab

MuxLab 500771 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur