Fujitsu MHW2040AC Manuel utilisateur
C141-E258-03EN
MHW2060AC, MHW2040AC
DISK DRIVES
PRODUCT MANUAL
FOR SAFE OPERATION
Handling of This Manual
This manual contains important information for using this product. Read thoroughly before using
the product. Use this product only after thoroughly reading and understanding especially the
section “Important Alert Items” in this manual. Keep this manual handy, and keep it carefully.
FUJITSU makes every effort to prevent users and bystanders from being injured or from suffering
damage to their property. Use the product according to this manual.
IMPORTANT NOTE TO USERS
READ THE ENTIRE MANUAL CAREFULLY BEFORE USING THIS PRODUCT.
INCORRECT USE OF THE PRODUCT MAY RESULT IN INJURY OR DAMAGE TO
USERS, BYSTANDERS OR PROPERTY.
While FUJITSU has sought to ensure the accuracy of all information in this manual, FUJITSU
assumes no liability to any party for any damage caused by any error or omission contained in this
manual, its updates or supplements, whether such errors or omissions result from negligence,
accident, or any other cause. In addition, FUJITSU assumes no liability with respect to the
application or use of any product or system in accordance with the descriptions or instructions
contained herein; including any liability for incidental or consequential damages arising therefrom.
FUJITSU DISCLAIMS ALL WARRANTIES REGARDING THE INFORMATION CONTAINED
HEREIN, WHETHER EXPRESSED, IMPLIED, OR STATUTORY.
FUJITSU reserves the right to make changes to any products described herein without further notice
and without obligation.
This product is designed and manufactured for use in standard applications such as office work,
personal devices and household appliances. This product is not intended for special uses (atomic
controls, aeronautic or space systems, mass transport vehicle operating controls, medical devices for
life support, or weapons firing controls) where particularly high reliability requirements exist,
where the pertinent levels of safety are not guaranteed, or where a failure or operational error could
threaten a life or cause a physical injury (hereafter referred to as "mission-critical" use). Customers
considering the use of these products for mission-critical applications must have safety-assurance
measures in place beforehand. Moreover, they are requested to consult our sales representative
before embarking on such specialized use.
The contents of this manual may be revised without prior notice.
The contents of this manual shall not be disclosed in any way or reproduced in any media without
the express written permission of Fujitsu Limited.
All Rights Reserved, Copyright FUJITSU LIMITED 2007
Revision History
(1/1)
Edition Date Revised section (*1)
(Added/Deleted/Altered) Details
01 2007-02-28 — —
02 2007-06-15
Entire manual (added)
Addition of description for
CA06821-B902.
03 2007-08-24 Entire manual (added) Addition of description for
MHW2060AC
*1 Section(s) with asterisk (*) refer to the previous edition when those were deleted.
C141-E258
This page is intentionally left blank.
Preface
This manual describes MHW2060AC, and MHW2040AC models of the MHW
Series, 2.5-inch hard disk drives. This drive has a built-in controller that is
compatible with the ATA interface.
This manual describes the specifications and functions of the drive and explains in
detail how to incorporate the drive into user systems. This manual assumes that
the reader has a basic knowledge of hard disk drive and their implementations in
computer systems.
This manual consists of seven chapters and sections explaining the special
terminology and abbreviations used in this manual:
Overview of Manual
CHAPTER 1 Device Overview
This chapter gives an overview of the disk drive and describes their features.
CHAPTER 2 Device Configuration
This chapter describes the internal configurations of the disk drive and the
configuration of the systems in which they operate.
CHAPTER 3 Installation Conditions
This chapter describes the external dimensions, installation conditions, and switch
settings of the disk drive.
CHAPTER 4 Theory of Device Operation
This chapter describes the operation theory of the disk drive.
CHAPTER 5 Interface
This chapter describes the interface specifications of the disk drive.
CHAPTER 6 Operations
This chapter describes the operations of the disk drive.
Glossary
The glossary describes the technical terms that need to be understood to read this
manual.
Acronyms and Abbreviations
This section gives the meanings of the definitions used in this manual.
C141-E258 i
Preface
Conventions for Alert Messages
This manual uses the following conventions to show the alert messages. An alert
message consists of an alert signal and alert statements. The alert signal consists
of an alert symbol and a signal word or just a signal word.
The following are the alert signals and their meanings:
This indicates a hazardous situation could result in
minor or moderate personal injury if the user does
not perform the procedure correctly. This alert signal
also indicates that damages to the product or other
property may occur if the user does not perform the
procedure correctly.
This indicates information that could help the user
use the product more efficiently.
In the text, the alert signal is centered, followed below by the indented message.
A wider line space precedes and follows the alert message to show where the alert
message begins and ends. The following is an example:
(Example)
Data corruption: Avoid mounting the disk drive near strong
magnetic sources such as loud speakers. Ensure that the disk drive
is not affected by external magnetic fields.
The main alert messages in the text are also listed in the “Important Alert Items.”
Operating Environment
This product is designed considering its application in car navigation systems.
Conventions
An MHW series device is sometimes simply referred to as a "hard disk drive,"
"HDD," "drive," or "device" in this document.
Decimal numbers are represented normally.
Hexadecimal numbers are represented as shown in the following examples:
X'17B9', 17B9h, 17B9H, or 17B9H.
Binary numbers are represented as shown in the following examples: 010 or 010b.
ii C141-E258
Preface
Representation of the data storage capacity in this manual
One gigabyte (GB) = one billion bytes; accessible capacity will be
less and actual capacity depends on the operating environment and
formatting.
Attention
Please forward any comments you may have regarding this manual.
To make this manual easier for users to understand, opinions from readers are
needed. Please write your opinions or requests on the Comment at the back of this
manual and forward it to the address described in the sheet.
Liability Exception
“Disk drive defects” refers to defects that involve adjustment, repair, or
replacement.
Fujitsu is not liable for any other disk drive defects, such as those caused by user
misoperation or mishandling, inappropriate operating environments, defects in the
power supply or cable, problems of the host system, or other causes outside the
disk drive.
Compliance with Administration on the Control of Pollution Caused by
Electronic Information Products of the People's Republic of China
This product is shipped as a component to manufacture the final products. Therefore, the packaging
material code provided in GB18455-2001 is not marked on any packaging part of this product.
C141-E258 iii
This page is intentionally left blank.
Important Alert Items
Important Alert Messages
The important alert messages in this manual are as follows:
A hazardous situation could result in minor or moderate personal
injury if the user does not perform the procedure correctly. Also,
damage to the product or other property, may occur if the user does not
perform the procedure correctly.
Task Alert message Page
Normal Operation Data corruption: Avoid mounting the disk near strong
magnetic sources such as loud speakers. Ensure that the disk
drive is not affected by external magnetic fields.
Damage: Do not press the cover of the disk drive. Pressing
it too hard, the cover and the spindle motor contact, which
may cause damage to the disk drive.
Static: When handling the device, disconnect the body
ground (500 kΩor greater). Do not touch the printed circuit
board, but hold it by the edges.
3-6
Damage: Interface cable connection
Take note of the following precaution about plugging an
interface cable (socket) into the interface connector of the
disk drive and plugging the connector into a host receptacle:
−When plugging together the disk drive interface
connector and the host receptacle or interface cable
connector (socket), do not apply more than 10 kgf of
force in the connection direction once they are snugly and
securely in position.
3-9
C141-E258 v
This page is intentionally left blank.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Fujitsu Stockage
Fujitsu
Fujitsu MHV2100BH Manuel utilisateur
Fujitsu
Fujitsu MJA2500BH - Mobile 500 GB Hard Drive Manuel utilisateur
Fujitsu
Fujitsu Eternus DX80 S2 Manuel utilisateur
Fujitsu
Fujitsu ETERNUS AF S3 Series Instructions de montage
Fujitsu
Fujitsu MBA3073NC Manuel utilisateur
Fujitsu
Fujitsu MAV2036RC - 36.7 GB Hard Drive Manuel utilisateur
Fujitsu
Fujitsu ETERNUS DX S4 Series Manuel utilisateur
Fujitsu
Fujitsu MAN3735 SERIES Manuel utilisateur
Fujitsu
Fujitsu MAF3364LC - Enterprise 36.4 GB Hard Drive Manuel utilisateur
Fujitsu
Fujitsu LTO-5 Manuel utilisateur
Fujitsu
Fujitsu ETERNUS LT20 S2 Comment utiliser
Fujitsu
Fujitsu C141-E090-02EN Manuel utilisateur
Fujitsu
Fujitsu MHV2040AT - Hard Drive - 40 GB Manuel utilisateur
Fujitsu
Fujitsu ETERNUS DX100 S3 Manuel utilisateur
Fujitsu
Fujitsu ETERNUS DX100 S3 Manuel utilisateur
Fujitsu
Fujitsu ETERNUS JX40 S2 Manuel utilisateur
Fujitsu
Fujitsu MPD3XXXAT Manuel utilisateur
Fujitsu
Fujitsu MAT3300FC Manuel utilisateur
Fujitsu
Fujitsu ETERNUS DX60 S3 Manuel technique
Fujitsu
Fujitsu MBA3300FD Manuel utilisateur
Manuels Stockage populaires d'autres marques
Spectra Logic
Spectra Logic T-Series Spectra T50e Manuel utilisateur
Panasonic
Panasonic LKM-F931-1 Manuel utilisateur
Tabernus
Tabernus Enterprise Erase E2400 Manuel utilisateur
Rocstor
Rocstor COMMANDER 3F series Manuel utilisateur
HP
HP P9000 Manuel utilisateur
Western Digital
Western Digital Ultrastar Data60 Manuel utilisateur