Fujitsu MAN3184 SERIES Manuel utilisateur

C141-E123-01EN

MAN3184, MAN3367, MAN3735 SERIES

DISK DRIVES

SCSI PHYSICAL INTERFACE SPECIFICATIONS

This Product is designed, developed and manufactured as contemplated for general use, including

without limitation, general office use, personal use and household use, but is not designed,

developed and manufactured as contemplated for use accompanying fatal risks or dangers that,

unless extremely high safety is secured, could lead directly to death, personal injury, severe

physical damage or other loss (hereinafter “High Safety Required Use”), including without

limitation, nuclear power core control, airplane control, air traffic control, mass transport operation

control, life support, weapon launching control. You shall not use this Product without securing the

sufficient safety required for the High Safety Required Use. If you wish to use this Product for

High Safety Required Use, please consult with our sale person in charge before such use

The contents of this manual is subject to change without prior notice.

C141-E123-01EN i

FOR SAFE OPERATION

Handling of This manual

This manual contains important information for using this product. Read thoroughly before using

the product. Use this product only after thoroughly reading and understanding especially the

section “Important Alert Items” in this manual. Keep this manual handy, and keep it carefully.

FUJITSU makes every effort to prevent users and bystanders from being injured or from suffering

damage to their property. Use the product according to this manual.

Functional Limitations

There may be certain functional limitations concerning the specifications and functions of the

products covered by this manual depending on the equipment version, especially concerning the

following functions.

Versions in which there functions can be used will be communicated through “ENGINEERING

CHANGE REQUEST/NOTICE”, issued by Fujitsu.

Function Equipment Version Which Supports These Functions

Equipment

Version No. EPROM

Version No. Standard INQUIRY Data Product

Revision (ASCII)

WRITE RAM Command These commands cannot be used in the current version.

READ RAM Command

(Proceed to the Copyright Page)

C141-E123-01ENii

Related Standards

Specifications and functions of products covered by this manual comply with the following

standards.

Standard (Text) No. Name Enacting Organization

T10/1302D Rev 14

(final) Working Draft

American National Standard Information

Technology --- SCSI Parallel Interface 3

American National

Standards Institute

(ANSI)

C141-E123-01EN iii

REVISION RECORD

Edition Date

published Revised contents

01 Mar.,2001

Specification No.: C141-E123-**EN

The contents of this manual is subject to

change without prior notice.

FUJITSU LIMITED

This page is intentionally left blank.

C141-E123-01EN v

PREFACE

This manual explains the MAN3184/MAN3367/MAN3735 series 3-1/2" intelligent disk drives each having

the built-in SCSI controller.

This manual details the specifications and functions of the Small Computer System Interface (SCSI) to

connect the above listed disk drives to the user system. Also, the manual details various SCSI command

specifications and the command processing functions, and provides the information required to creation of

host system software. This manual is intended to be used by the users who have the basic knowledge of

computer system operations.

The following lists the manual configuration and the contents of each chapter. The caution labels and

markings are also explained.

Manual Configuration and Contents

This manual consists of the following three chapters, and the terminologies and abbreviations sections.

Chapter 1 SCSI Bus

This chapter describes the configuration, physical and electrical requirements, interface protocol, and

other operations of the Small Computer System Interface (SCSI) which connects the

MAN3184/MAN3367/MAN3735 series intelligent disk drives to the user system.

Chapter 2 SCSI Messages

This chapter describes the type and explanation of messages defined for SCSI bus operations.

Chapter 3 ERROR Recovery

This chapter describes error recovery processing executed by the MAN3184/MAN3367/MAN3735 series

intelligent disk drives in response to various errors on the SCSI bus.

Glossary

This section explains the terminologies the reader must understand to read this manual.

Abbreviations

This section lists the abbreviated terms and their full words used in this manual.

C141-E123-01ENvi

CONVENTIONS

This manual uses the following conventions:

NOTE: NOTE indicates the information useful for the user to operate the system.

Important information

The important information is provided with the "Important" title. The important information text is

centered so that the reader can distinguish it from other manual texts. The following gives an example:

IMPORTANT

The IDD operates as a target (TARG) on the SCSI bus. The IDD is

called "TARG" in this chapter except when clear identification is

required.

Notations

A decimal value is indicated as it is in this manual.

A hexadecimal value is indicated in the X'17B9' or 17B9h or 17B9H notation.

A binary value is indicated in the notation similar to "010."

The disk drive model name has a different suffix depending on its SCSI electrical characteristics, capacity,

data format used during shipment and others. The following typical model name is used except when the

model needs to be distinguished. Also, the disk unit may be referred to as the "IDD" or "unit" in this

manual.

C141-E123-01EN vii

Note 1: Model name

M AN 3 184 MC

Interface type MP: Low-Voltage Differential, 16-bit SCSI Ultra-160m,

68-pin connector

MC: Low-Voltage Differential, 16-bit SCSI Ultra-160m,

SCA-2 connector

Formatted capacity (100 MB units)

Disk size

Type AN: 1-inch height (10,025 rpm)

Note 2: Typical model name

Type model name Model name

MAN3184 MAN3184MP, MAN3184MC

MAN3367 MAN3367MP, MAN3367MC

MAN3735 MAN3735MP, MAN3735MC

Requesting for User's Comments

Please use the User's Comment Form attached to the end of this manual to identify user comments including

error, inaccurate and misleading information of this manual. Contact to your Fujitsu representative for

additional comment forms if required.

C141-E123-01ENviii

MANUAL ORGANIZATION

Product/

Maintenance Manual • General Description

• Specifications

• Data Format

• Installation Requirements

• Installation

• Diagnostics and Maintenance

• Error Analysis

• Principle of Operation

SCSI Physical

Interface

Specifications

• SCSI Bus

• SCSI Message

• Error Recovery

SCSI Logical

Interface

Specifications

• Command Processing

• Data Buffer Management

• Command Specifications

• Parameter Data Formats

• Sense Data and Error Recovery Methods

• Disk Media Management

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Fujitsu Stockage

Fujitsu

Fujitsu ETERNUS DX60 S3 Manuel technique

Fujitsu

Fujitsu MAN3184MC - Enterprise 18.4 GB Hard Drive Manuel utilisateur

Fujitsu

Fujitsu Eternus DX80 S2 Manuel utilisateur

Fujitsu

Fujitsu MPF3102AT - Desktop 10.2 GB Hard Drive Manuel utilisateur

Fujitsu

Fujitsu HARD DISK DRIVES MAW3073FC Manuel utilisateur

Fujitsu

Fujitsu Eternus DX80 S2 Manuel utilisateur

Fujitsu

Fujitsu MHC2032AT Manuel utilisateur

Fujitsu

Fujitsu MAM3184MC/MP Manuel utilisateur

Fujitsu

Fujitsu C141-E280 Manuel utilisateur

Fujitsu

Fujitsu MAW3073 SERIES Manuel utilisateur

Fujitsu

Fujitsu ETERNUS DX100 S3 Manuel utilisateur

Fujitsu

Fujitsu MHS2030AT - 2.5" Notebook 30GB Drive Manuel utilisateur

Fujitsu

Fujitsu MPG3XXXAH Manuel utilisateur

Fujitsu

Fujitsu MBA3073 SERIES Manuel utilisateur

Fujitsu

Fujitsu ETERNUS DX60 S2 Manuel utilisateur

Fujitsu

Fujitsu MPC3032AT Manuel utilisateur

Fujitsu

Fujitsu ETERNUS AF250 Manuel utilisateur

Fujitsu

Fujitsu ETERNUS2000 model 100 Manuel utilisateur

Fujitsu

Fujitsu ETERNUS LT20 S2 Manuel utilisateur

Fujitsu

Fujitsu ETERNUS DX60 Mode d’emploi

Fujitsu

Fujitsu ETERNUS LT20 S2 Manuel utilisateur

Fujitsu

Fujitsu MBA3073RC SERIES Manuel utilisateur

Fujitsu

Fujitsu MAX3147 NC SERIES Manuel utilisateur

Fujitsu

Fujitsu ETERNUS LT20 S2 Manuel utilisateur

Manuels Stockage populaires d'autres marques

QNAP

QNAP TS 32PXU Series Manuel utilisateur

LaCie

LaCie RUGGED RAID Manuel utilisateur

Freecom

Freecom CLS DOCK Manuel utilisateur

PNY

PNY Attache P-FD64MBATT3 Manuel utilisateur

HP StorageWorks MSL2024 Manuel utilisateur

OLT

OLT 6x6 Maximizer Manuel utilisateur

Transcend

Transcend JetFlash 160 Manuel utilisateur

LaCie

LaCie RUGGED MINI Manuel utilisateur

Thunderbolt

Thunderbolt 600 Manuel utilisateur

Panasonic

Panasonic LB-DH8 series Manuel

Intel

Intel RAID High Availability Manuel utilisateur

LaCie

LaCie 12big Thunderbolt 3 Manuel utilisateur

Spectra Logic

Spectra Logic T-Series Spectra T50e Manuel utilisateur

Panasonic

Panasonic LKM-F931-1 Manuel utilisateur

Tabernus

Tabernus Enterprise Erase E2400 Manuel utilisateur

Rocstor

Rocstor COMMANDER 3F series Manuel utilisateur

HP P9000 Manuel utilisateur

Western Digital

Western Digital Ultrastar Data60 Manuel utilisateur